CNC horizontal machining center

HECKERT HEC 1250 Athletic

Condition: used, Year of construction: 2018, control CELOS / F31iB5 / Mapps 4S max. turning diameter 670 mm turning length 1.538 mm bar passage max. 81 mm x1 axis 675 mm y-axis mm z1 axis 1.562 + 164 mm b-axis ° a-axis 1.542 mm x2-axis 200 mm y2-axis + / - 40 mm z2-axis 1.542 mm max. turning speeds 4.000 U/min power capacity 26 / 22 kW spindle passage Ø 91 mm max. turning speeds 5.000 U/min power capacity 22 / 18,5 kW spindle passage Ø 73 mm turning speed range 0 – 12.000 U/min power capacity 28/ 23 kW tool taper Capto C6 number of tool places 76 Pos. max. tool diameter Ø 70/ Ø 130 mm max. tool length 400 mm max. tool weight 8 kg Number of tool holders 10 pos. Shank length for square tool 20 mm Shank diameter for boring bars Ø 32 mm power capacity 5,5/ 5,5/ 3,7 kW torque 16,9/ 13,1/ 8 Nm x-axis 50 m/min y-axis 40 m/min z-axis 50 m/min A-axis 36 m/min x2-axis 25 m/min y2-axis 18 m/min z2-axis 40 m/min b-axis 100 U/min Hollow clamping device Ø 67 mm Number of working hours ca. 23.250 h spindle hours ca. 8. h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Kitagawa hollow chuck on main and counter spindles - Dual foot switch for spindle 1 and spindle 2 - Full indexing of the tool spindle - Turret tailstock function - Suitable coolant type: Water-soluble coolant - Chip conveyor - Coolant system 70 bar, Hydrajet brand - Compressed air on spindle 1 and spindle 2 - Automatic measuring arm on the main spindle - Workpiece ejection on the spindle - Parts unloader - Preparation for bar feeder - Interface for mist separator - 2 RotorClear units - 4-color indicator light Rsdpfxoyfh R Hj Afcsp - Multi-Dry filter - Automatic probing and tool correction - Memory expansion - Cycle for plane transformation - Coolant spray gun Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 2003, travel distance X-axis: 13,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 30,000 rpm, distance between stands: 6,500 mm, spindle nose: HSK A63, X-axis: 13.000 mm Y-axis: 4.500 mm Z-axis: 1.000 mm Distance between columns: 6.500 mm C-axis: 190º Rsdpfjtt I Sfjx Afcjp A-axis: 110º Positioning speed XYZ: 15.000 mm/min. Positioning speed AC: 10 tpm CNC Controller: Siemens 840D Spindle nose: HSK A63 Spindle speed: 30.000 rpm Spindle power: 20 kW Toolchanger: 20 Pockets Torrestool tables: 16x X-axis: 11.500 mm Y-axis: 3.500 mm Z-axis: 750 mm Country of origin: Spain Machine size LxWxH: 19.000 x 11.000 x 6770 mm Machine weight: 70.000 kg The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed to work on aeronautical materials (Composite, Aluminum, Titanium, Steel, ...). The Torresmill gantry is perfectly combined with the Torrestool universal clamping device, guaranteeing flexibility and process time.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Rsdpfxow Dfhus Afcep

Condition: used, Year of construction: 1981, machine/vehicle number: 78.977, Equipment: documentation/manual, Year of manufacture: 1981 / Year of retrofit: 1996/1997 Control: Siemens 840 C Siemens control for X/Y/Z/W/U/B/V axes Redoqc Umgspfx Afcep Spindle diameter: 200 mm Main motor Siemens: 68 kW Spindle speeds: I gear: 3 - 202 rpm II gear: 180 - 808 rpm X travel: 12,000 mm Y travel: 4,500 mm Z travel: 2,400 mm (supporting sleeve □ 520 mm/travel 1200 mm + W axis 1200 mm) Mount: SK60 (SK50) Facing slide: yes Milling head: 2 units Prepared for CNC rotary table (4th axis) Without rotary table and clamping field (available separately) Full documentation Net weight: approx. 140 tons Video available!

Condition: excellent (used), FANUC Professional 6 Control Working travels 900 x 900 x 1020 mm Tool changer with 136 Positions Spindle speeds -10'000 rpm Redpfx Afox A E Enscop Spindle taper HSK100 2 paletts 630 x 630 mm B-axis 0.001° Palett changer FASTEMS FPC1500 Cooling through spindle 3D measuring taper Tool breakage control device Tool lenght measuring device Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Redpfexl R Hvex Afcsp Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: ready for operation (used), Year of construction: 1997, Model: TG20/2500 CNC: SIEMENS 840 C Turning diameter: 2500 mm Table diameter: 2000 mm Turning height: 2000 mm Redpfjxwp D Dox Afcep Max. table load: 20,000 kg Max. table speed: 2–250 rpm Number of speed ranges: 4 Table motor power: 60–100 kW Z-axis travel: 1,500 mm Ram section: 250 x 250 mm Rapid traverses: 10,000 mm/min Milling speed: 0–4,000 rpm Milling motor power: 37 kW Driven tools

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 10,000 rpm, Zimmermann FZ38 – 5-axis gantry Year of manufacture: 2005 – fully refurbished and upgraded in 2022 by Zimmermann for €600,000, full documentation available X 3000 Y 2500 Z 1250 A +/- 100 degrees C +/- 360 degrees 2 spindles: 50 kW – 24,000 rpm and 44 kW – 10,000 rpm HSK 100 Linear axes certification 5/m Siemens control U… Immediately available Rsdpfx Asxziamofcjp This machine was completely overhauled and upgraded by Zimmermann in 2022. At that time, approximately €600,000 was invested, with all invoices available. The machine is in very good, near-new condition.

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm Rodpfx Aox Rkvqofcep No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Condition: used, Year of construction: 2017, x-travel 5850 mm y-travel 2500 mm z-travel 1000 mm Control 840D sl feeds x- + y-axis 20 m/min feeds z-axis 20 m/min acceleration 5 m/qs spindle drive - main spindle 60 kW spindle turning speed - stepless 24.000 U/min max. torque on the working spindle 87 Nm tool taper HSK-A63/F80 c-axis +/- 360 grad a- axis +/- 100 grad tool changer 20 stück coolant tank 2300 l surface area 6.000*2.500 mm number of T-slots 18 flute distance 125 mm dimensions of the machine ca. 14,8x7,3x5,8 m Machine table Width 2,500 mm Length 6,000 mm Number of T-slots 20 Distance of T-slots 125 mm Dimensions of T-slots 18H8 mm Max. table load 8,000 kg Travels Rjdpfx Afsycln Djcep Cross rail: X axis 5,850 mm Cross slide: Y axis, horizontal 2,500 mm Z axis, vertical 1,000 mm Feeds X-, Y- and Z-axes Feed rate 20 m/min Rapid traverse rate 45 m/min Acceleration 5 m/s² Vertical Slide Cross section 560x420 mm Motor spindle Drive power S1 (100% ED) 60 kW Max. speed 24,000 rpm Max. torque 87 Nm Tool interface HSK-A63/F80 C-axis Swivel range ±360 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm A-axis Swivel range ±100 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm Total dimensions Length 14,800 mm Width 7,300 mm Height 5,800 mm