CNC turning and milling center

Mazak Integrex 300 3 ST

Condition: excellent (used), Year of construction: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Tsdpfxjy Ipp Rs Antjb Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Drawtube diameter: 66 mm / 52 mm C-axes: Minimum input unit: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min C-axis lock: disc brake C-axis positioning time: 1.5 s Upper/lower turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Square tool size: 25 mm Round shank tool size: 32 mm Driven tools: Drive system: single drive Spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of driven tool stations: 12 × 2 Collet size: ER32 Straight toolholder size: 2 mm – 20 mm Cross toolholder size: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Footprint: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as shown in photo gallery includes, among others: Nakamura lathe, toolholders (driven and non-driven), collets, complete operating documentation, portal loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement Tedpoy Dvlqjfx Antob - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 935 mm, controller manufacturer: OKUMA, controller model: OSP-P200L, number of axes: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information. • ATC / tool magazine: 40 positions • Toolsetter • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub spindle: A2-6 nose; 38–5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Tsdjx D Rvhepfx Antjb Additional equipment • Barfeeder IF • Approximately 60 HSK 63 tool holders • Half a pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets

Year of construction: 2015, condition: ready for operation (used), A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Tedsxvrt Sjpfx Antob

Condition: used, Year of construction: 2013, Technical details: faceplate diameter: 800 mm power requirement: 110 kW weight of the machine ca.: 37.000 / total 52.000 t transport measurements machine: 5,07 x 2,98 x 3,90 m clamping diameter: 800 mm Tsdpfx Aneuyp Enotjb : Ø 800 x 720 mm Tool bore: Capto C6 tools in tool magazin: 2 x 80 With C-Axis *

Condition: used, Technical details: spindle diameter: 150 mm x-travel: 3000 mm y-travel: 2000 mm spindle stroke: 700 mm dimension of the ram: 340 x 340 mm ram stroke: 700 column travel: 1500 mm spindle taper ISO: 50 bore spindle turning speed range: 3,2 - 1600 U/min table surface area: 2000 x 2500 mm max. table load: 25000 kg rapid speed: 5 / 10 m/min feed speeds: 1 - 5000 mm/min total power requirement: 100 kW weight of the machine ca.: 57 t dimensions of the machine ca.: 8,4 x 6,8 x 5,9 m with CNC SIEMENS 840 D full B-axis aerostatic guideways facing head ( 3,2 - 140 rpm ) angular milling head 1000 Nm coolant attahcmnet with internal cooling supply Todjy Anpxspfx Antsb *

Condition: used, Year of construction: 1990, spindle diameter 150 mm x-travel 4000 mm y-travel 3000 mm z-travel 1000 mm w-travel 1500 mm Table area 2000x2000 mm Table load 30 t Feed 3-3500 mm/min Rapid movement 5000 mm/min transmission ratio 2 Tsdpfsyqtf Tex Antsb spindle power 37 kW voltage 380 V frequency 50 Hz Control Heidenhain type ITNC mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, spindle diameter: 130 mm, overall weight: 32,450 kg, year of last overhaul: 2014, The machine is in very good technical condition, equipped with a Heidenhain iTNC 530 CNC control system. Specifications: Spindle diameter: 130 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Taper in spindle: ISO 50 Spindle extension: 1120 mm Horizontal spindle head extension: 450 mm Total installed motor power: 50 KVA Dimensions (L x W x H): 10100 x 4380 x 5250 mm Todex Hfk Iepfx Antob Weight: 32,450 kg

Condition: used, Year of construction: 2005, Technical details: x-travel: 1800 mm y-travel: 1600 mm z-travel: 1400 mm B-axis (table): 360° size of pallet: 1000 x 1250 mm workpiece swing dia.: 2100 mm workpiece weight: 3500 kg spindle taper ISO: 50 spindle drive motor: 37 kW spindle turning speed range: 25 - 10000 U/min feed range: 40/50 m/min rapid power traverse circular: 10 U/min total power requirement: 90 kVA weight of the machine ca.: 43 t dimensions of the machine ca.: 11 x 9 x 4,5 m Machine with SIemens 840 D control for 4 axis - full B-axis - palette changer - tool changer for 150 tools - coolant device with coolant through spindle - chip conveyor Todsvgcrkspfx Antjb *

Condition: good (used), Manufacturer: INNOCENTI Type: PM 325 FT Year of construction: 2012 Specifications: Metric Metric US Standard Table length 4250 mm Table width 4250 mm Table load 130.000 V-axis feed 3000 mm B-axis rotation 360.000 ° High-speed rotation B-axis 0.16 - 34.5 Omw/min. Dimensions (estimate) length 8000 mm width 4250 mm height Tjdpfjtwllfox Antjb 2000 mm weight 62500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.