Offset printing press

Heidelberg SM 74-2-P

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: DS000058, Heidelberg SM 74-2-P • Age: 2008 • Counter: 101 million printed sheets • Format: 53 x 74 cm • Performance: 13.000 sheets/hour • Sold directly by the printing house • Single owner • Purchased new in 2008 • Maintained and repaired exclusively with original Heidelberg parts Iiodsxxxyqspfx Ad Dsi • All service work performed by authorized Heidelberg technicians every year • You may contact the Lithuanian Heidelberg branch for an independent opinion on the machine’s condition (Identification No. DS000058) • Machine is in excellent working order and ready for production • The machine is sold with the “EasyTrax” color scanning system by X-Rite, paired with a „JUST-Normlicht“ 5000K standardized lamp (separate purchases are not possible). • Available for sale starting April 2026 • Until then, it will remain in operation with regular maintenance and any necessary repairs performed if needed • The current counter shows 101 million printed sheets. As the machine will remain in operation until April 2026, this number will increase, but it will not exceed 104 million. • Visitors are welcome to come to our printing house and perform any test prints and inspect the machine’s condition • It is possible to have the printing machine deinstalled, placed on a pallet, preserved, and prepared for transport by an authorized Heidelberg service team for an additional cost. • We still have retained the original Heidelberg pallets designed for transporting the machine. Equipment: • „EasyTrax“ color scanning system by „X-rite“, paired with „JUST-Normlicht“ standardized lamp (5000K). • Perfector 1/1 2/0 (More modern version with transfer jackets instead of “Superblue” cloths) • “PowderStar AP110” (updated version compared to the older „Alphatronic 200“ powder system) • „AutoPlate“ (a better automated plate-changing system, compared to the „EasyPlate“, which requires manual tightening of plates to the cylinder) • Elektromechanical and Ultrasonic Double sheet detector in Feeder • “Alcolor” dampening system • Additional oil drip pan • Location: Kaunas, Lithuania • Nearest seaport: Klaipeda, Lithuania • A complete document detailing the technical specifications and features of the machine is available upon request. • Please feel free to reach out with any further questions.

Condition: used, An automated die-cutting press in 72 x 102 cm format Equipped with: Max. sheet size: 720 x 1020 mm Min. sheet size: 350 x 400 mm Pressing force: 2.5 MN (250 tons) Feeder and delivery without gripper bands Iiodpewvmgisfx Ad Dei Max. speed: 7,500 sheets/hour Quick-change system Suction head feeder Cutting area Stripping area and waste removal In good condition

Condition: used, Year of construction: 1997, The machine in question is a Heidelberg SM 74-2-P, manufactured in 1997 with the serial number 622034. It is designed to handle a size of 520 x 740 mm and has an impressive record of 64 million impressions. Currently, the machine is operational and located in a printshop in Germany. Iijdpfx Asxltn Njd Dei This model is equipped with several advanced features, including an Alcolor Dampening system with a Baldwin cooling device, an AutoPlate system for automated plate changing, and a blanket wash mechanism for maintaining print quality. Additionally, it is fitted with an Alphatronic 200 control system and is capable of perfecting 1/1-2/0, which allows for efficient and high-quality printing on both sides of the paper. Format: 520 x 740 mm Equipment: Alcolor Dampening with Baldwin cooling device AutoPlate Blanket wash Alphatronic 200 Perfecting 1/1-2/0 Automatic roller washers

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's. Iedpfjtyy Sfex Ad Deii

Year of construction: 1972, condition: ready for operation (used), Format: 1000x700mm, an inspection is possible. Iisdoqzkdqspfx Ad Dji

Condition: good (used), Offer consisting of: Müller Martini Tigra Year of production: 1999 Technical specification: - ZTM 1571 12 station gatherer + hand feeding station (1999) - Criss cross delivery - Hotmelt perfect binding line Tigra (1999) - Drying belts - Threeknife trimmer Esprit (2007 ) - Stacker Uno (2007) - Max. format: 370 x 285 mm - Min. format: 120 x 100 mm - Book thickness: 3 - 40 mm - No. of clamps: 9 - Production speed: 1000 - 3600 cycles/h Iodpfx Adovlk U Ds Doii

Condition: good (used), Year of construction: 2002, Format trimmed: max 300 x 400 mm, min 85 x 115 mm Untrimmed format: max 320 x 460 mm, min 100 x 125 mm Output: max 6,600 c/h Equipment: - Fully automatic infeed with integrated stack counter Iijdpfx Adoqqkvqs Doi - Cut counter - Cutting blower - 1 set of pressing plates and holders - 1 set of plate tables - 3 sets of cutting bars - 2 sets of knives - External device for knife change with setting gauge - Central lubrication - Operating instructions - Electrical circuit diagrams - Standard tools - Standard accessories

Condition: used, Year of construction: 1966, The Heidelberg SBG, built in 1966, is a reliable die-cutting and creasing machine tailored for packaging and commercial finishing. Currently operational in a German printshop, this model accommodates sheet sizes ranging from 115 ?? 160 mm up to 560 ?? 770 mm. It delivers a consistent production speed of 3,500 to 4,600 sheets per hour, ensuring efficient workflow for finishing tasks. Isdoxpw Egopfx Ad Deii The machine???s robust construction is reflected in its dimensions of 3,500 ?? 2,000 ?? 1,850 mm (L??W??H) and a net weight of 5,300???6,000 kg. The serial number for this unit is 29352. Format: 560 x 770 mm Equipment: For die-cutting / creasing in packaging and commer Max sheet size: 560 ?? 770???mm Min sheet size: 115 ?? 160???mm Speed: 3,500 ??? 4,600 sheets/hour Machine size (L??W??H): 3,500 ?????2,000 ?????1,850???mm Net weight: 5,300???6,000???kg

Condition: good (used), Year of construction: 2005, Size untrimmed: max 320 x 490 mm; min 103 x 140 mm Size trimmed: max 307 mm; min 100 mm Cover weight: 100 - 350 g/m² Speed: 1.000 - 6.000 Takte/min Power requirement: 10 kW Weight: 3.800 kg Equipment • 2 set of knives Iedpfjtuwnqjx Ad Deii

Condition: excellent (used), Year of construction: 2014, We are offering an x2 ATLAS COPCO ZR 400 7.5 compressor with the following specifications: Max working pressure: 7.5 bar Hours: 53000 Input power: 355 kW Rotational shaft speed: 1485 rpm Year of manufacture: 2014 The compressors were removed from a company that ceased operations. Additional Equipment Included: The compressors comes with x2 Atlas Copco air dryer, Model: MD1000 W CE, featuring: Max working pressure: 10.5 bar Year of manufacture: 2014 Please include your price offers directly when reaching out to us Isdju Szu Nepfx Ad Djii