Punching Machine

Koenig & Bauer Würzburg CONDOR

Condition: ready for operation (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: Nr.7723202, total width: 2,500 mm, total length: 3,400 mm, total height: 2,500 mm, overall weight: 9,000 kg, input current: 20 A, input voltage: 400 V, Best hand-built letterpress machine in 72 x 101 format. Requires very little space for this size. Extremely robust construction. Motor has only run for 3 years after overhaul, feeder table belts made from Habasit. We have three of these machines in daily production ourselves, used for die-cutting, creasing, perforating, and blind embossing. Output per hour is easily 3,000 to 3,500 sheets. Can also be converted to 72 x 102 cm format. Die-cutting plates for these machines are available from us. We have four of these Condor machines in stock, and they can be purchased in a package of 2 or 4 units. Dkodox A S Ipopfx Adyoi

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Dkjdpfx Adjtyy Sfoyoi Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Djdeucfwpjpfx Adyoki

Condition: good (used), Year of construction: 1972, 1 used Heidelberg SORK Dedpfx Adox R Uvnsyeki

Condition: excellent (used), Year of construction: 2014, We are offering an x2 ATLAS COPCO ZR 400 7.5 compressor with the following specifications: Max working pressure: 7.5 bar Hours: 53000 Input power: 355 kW Rotational shaft speed: 1485 rpm Year of manufacture: 2014 The compressors were removed from a company that ceased operations. Additional Equipment Included: The compressors comes with x2 Atlas Copco air dryer, Model: MD1000 W CE, featuring: Dkodpfx Adeu Szu Nsysi Max working pressure: 10.5 bar Year of manufacture: 2014 Please include your price offers directly when reaching out to us

Condition: ready for operation (used), Year of construction: 1993, 5 clamps side glue premelter dust extractor bag Djdpfx Adeyagutjyeki cover feeder

Condition: good (used), Year of construction: 1997, KERMA die-cutter Max. size: 1220x820 mm Dkodpfx Adjxni Epeyoi Safety fence 2 safety step mats

Condition: used, Industrial machine type KOR with 415 V operating voltage and 220 V secondary voltage. Three-phase connection, frequency range 50–60 Hz. Operating current 3.5 A, total motor power 4.3 kW. Protection: main fuse 25 A, fast fuse 20 A. Djdpfxow Saa To Adyski

Condition: ready for operation (used), Year of construction: 2006, A cold chamber die casting machine Urpemak for aluminium is available. Clamping force: 50t, platen width: 500mm, tie bar spacing: 500mm, shot weight: 50cm³, ejector force: 6400kg, connected load: 11kW, weight: approx. 4900kg. An on-site inspection is possible. Dodpsw R Dgzefx Adyeki

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,300 mm, total width: 1,400 mm, total height: 2,000 mm, Lithography press, also known as a scraper press, for manual printing from lithographic stones. Suitable for artists/lithography, in schools, art colleges, and museums. The machine was last used in the studio of the Gutenberg Museum in Freiburg for demonstrations and workshops. Suitable for stone formats up to 80 x 130 cm. Also very interesting as an exhibition piece for entrance halls, restaurants, etc., or for production use. Comes with many squeegees in various widths as accessories and 4 different hand rollers with leather covers for inking the stones. The wooden table requires some minor refurbishment. Please request additional pictures via private email address or WhatsApp. Dkjdpfxjx A H I Dj Adyoi