Decoiling/levelling/feeding line 4 t

HEILBRONN

Condition: good (used), Year of construction: 1979, turning diameter over bed slide: 490 mm, turning length: 1,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 37 rpm, Speed steps working spindle: 12 Spindle head: DIN 55 022, size 6 Shn2Y7Cms

Condition: repair required (used), Manufacture: Heilbronn Tip: 3200/500 load capacity: 3200 kg maximum plate width: 500 mm missing: Cr8Eqwddoi - roller clamping arm + working cylinder) - hydraulic power unit, - The device has not been tested For sale in this condition!

Year of construction: 1988, Condition: used, decoiler - expansion mandrel with coil lifter Ltiywa8Zi Bandbreite: max. 400 mm Banddicke: 0,3 - 4 mm Coilgewicht: 4 t Dorn-Ø: 508 mm

Condition: used, Year of construction: 1992, Pressure 080 t throat 300 mm stroke 8 - 100 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 440 mm table surface area 720 x 600 mm hole in the table 300 x 175 mm table height over floor 860 mm ram surface 400 x 270 mm ram adjustment 60 mm power requirement 7,5 kW weight 6,0 t dimensions (WxDxH) 1,3 x 2,2 x 3,05 m permitted for manual put-in according to the German Safety Regulations (UVV) Dqqkvt with hydraulic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation

Condition: used, Single column eccentric press HEILBRONN type REPV 75 make no. 4467 year of construction 1972 pressure force 75 ton. throat 300 mm table size 720 mm x 590 mm ram size 450 mm x 295 mm table height above floor 735 mm ram stroke 12 - 140 mm slide adjustment travel 100 mm Installation height max. 400 mm Clamping spigot bore Ø 40 mm Stroke rate 43/86 strokes/min. Motor power 4.4/7.5 kW Ngsv9 drive power 400 Volt 50 Hz. - Table height adjustment with 2 support spindles - Drive with gear reducer - 2- motor speeds - pneumatic clutch-brake combination ORTLINGHAUS - movable screen, protective screen BLACK - overload protection with crushing plate - automatic central lubrication - 2-manual control panel and electric foot switch for stroke release - control cabinet fixed to the machine - Control cabinet for protective screen adjacent L x W x H 400 x 200 x 600 mm space requirement of the press L x W x H 2300 x 1500 x 2650 mm weight of the press approx. 5,5 ton. good condition

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm stroke 30 - 140 mm table surface area 1100 x 850 mm Dqntcp dayligth 500 mm ram surface 800 x 600 mm ram adjustment 110 mm tool hole in ram Durchm. 65 x Tiefe 105 mm no. of strokes 45 Hub/min total power requirement 15 kW weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: refurbished (used), Functionality: fully functional, machine/vehicle number: A6493, Overhauled 50 t HEILBRONN C-press suitable for manual loading work, available at short notice. Hydraulic clutch/brake combination, automatic central grease lubrication, manual ram adjustment, mechanical overload protection, new lubrication/hydraulic hoses, etc. Dimensions - see machine drawing as PDF. Cvhk0Bqbgs Technical data: Pressing force: 500 kN Speed: 100 /min.(variable speed optional) Variable stroke: 8 - 100 mm ram adjustment: 80 mm Installation height: 400 mm (max. stroke at bottom, adjustment at top) Table: 650 x 500 mm Plunger: 400 x 250 mm Projection: 350 mm Max. drive power: 4kW Weight approx.: 4,000 kg

Condition: used, Year of construction: 1983, machine/vehicle number: 5154, Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm E2Pqpze Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton Standard configuration Extended machine accessories Press body can be tilt

Condition: used, Year of construction: 1982, Lead and feed screw lathe Weisser Junior with Multifix B lathe chuck Uivvclsp9V

Condition: used, Year of construction: 1989, Functionality: unexamined, material thickness: 3 mm, number of feed rollers: 2, material width: 400 mm, * ALBA roller feed type UVHY 400, year 1989 * ALBA control panel with switch cabinet * Heilbronn straightener type RMG 7/500/80 (with 9 rollers) * Heilbronn reel type HAEM2000/500, cup width up to 400 mm, 3-4 tons Uszvpt2Fgx

Year of construction: 1973, Condition: used, machine/vehicle number: 104530, pression: 100 t throat: 350 mm Mumg7 table size: 690 x 840 mm clearance hole in the die: 160 mm Ø tappet area: 450 x 600 mm tappet adjustment: 80 mm stroke adjustment: 8 - 100 mm number of strokes: 60 /min engine: 380 V, 5,5 kW space needed: 1850 x 1850 x 2650 mm weight: 6800 kg

Condition: used, Year of construction: 1982, turning length / mm turning diameter / mm centre height / mm control / Very good condition CNC lathe WEISSER Heilbronn, type Gigant. From precision operation, precision machining only. Dplvmj Type Gigant Machine no. 27-0166 Year of manufacture 1982 Hydraulically self-clamping Forkart chuck with power clamping cylinder 4-fold Sauter turret, size 400 mm2 Siemens SINUMERIK 840D fully functional Commissioning 04/2003 Traverse paths X 725 mm (stroke), Z 1,480 mm Main spindle drive direct current 45 kW (rated power) Speeds in 3 stages up to max. 1,120 rpm One set of base jaws inside/outside without lynette (but can be provided for customisation) incl. documentation

Condition: used, Year of construction: 1970, turning diameter over bed 400 mm turning diameter over slide rest 180 mm turning length 1000 mm total power requirement 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,4*1*1,5 m No. 3872 Lead and pull spindle lathe WEISSER Heilbronn Junior Working area: Ø 400 x 1000 mm Drive: 4 kW 3-jaw chuck Ø 200 mm Multifix steel holder "B" with 3 holders Rq8Yte3Me7 Rolling center punch Coolant device Tailstock Machine light 6 machine feet Hollow spindle 45 mm Ø Speed range up to 1000 rpm (12 speeds) Tool holder MK 4 Weight 1700 kg Dimensions 2.4 x 1.0 x 1.5 m

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm centre distance:750 mm spindle head:Gr.6 9Tkqwtekt spindle bore:58 mm total power requirement:18 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:2,70x1,58x1,68 m

Condition: used, pressure 100 t throat 350 mm stroke 8 - 100 mm no. of strokes 60 Hub/min daylight (stroke down, ram adjustment above) 300 mm ram adjustment manuell 80 mm Jtojcoh table surface area 850 x 700 mm hole in the table Dm. 180 mm mm ram surface 560 x 400 mm ram drills x depth 40 x 95 mm table height over floor 850 mm total power requirement 7,5 kW weight of the machine ca. 8 t dimensions of the machine ca. 1,4 x 2,2 x 2,85 m - Gear transmission - hydraulic clutch - hydraulic overload - Grease central lubrication - Balluff cam switch - mech. Ejector in the ram - Ram weight compensation - Ratchet for ball screw adjustment - Vibration plates - CE conformity - CE-compliant operating instructions - Machine safe for hand inlay work - Machine is checked in our company and receives current UVV

Condition: good (used), Parallel Lathe WEISSER HEILBRONN Between points: 1100 mm Maxi Ø on bench: 440 mm Maxi Ø over saddle: 230 mm Bwe7Susg Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1300 x 1500 mm Weight: approx 2 T

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) Syqgqs yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Year of construction: 1986, Condition: used, Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press Cjlw93Htql -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

Year of construction: 1972, Condition: ready for operation (used), An inspection is possible. Msyevch

Condition: used, Year of construction: 1987, machine/vehicle number: 5347, pressure:10 T throat:180 mm stroke:8-60 mm Ltc0Etyf no. of strokes:180 Hub/min table surface area:400 x 340 mm table height over floor:935 mm hole in the table:80 mm ram - range of adjustment:40 mm ram surface:180 x 110 mm total power requirement:1,1 kW weight of the machine ca.:0,6 t dimensions of the machine ca.:1,2 x 1,5 x 2,0 m

Condition: repair required (used), Made in: Heilbronn Bcfdgcnn0Sg Tip: Fly 100 Weight: 9000 kg table size: 1000x800mm max. pressing force: 100t The condition of the machine is unknown, it has not been tested!!! without control cabinet! For sale in this condition

Year of construction: 1983, Condition: used, Force: 75 tons Table: 630x620mm Xujw2Gkdp Ram: 500x450mm Ram adjustment: 80mm Daylight: 370mm Windows: 300mm Stroke: 08-100mm Strokes/Minute: 07-160 Requested power: 11KW Weight: 7 tons Height: 3050mm SIRI electronic servo roll feeder Hydraulic overload protection Hydraulic Ortlinghaus clutch

Year of construction: 1997, Condition: used, Force: 320 tons Type: SAR320 Table: 1950x1100 Ram: 1650x1100 Bbyec3R Windows: 800mm Strke: 20-102mm Strokes /minute: 20-120 Requested power: 90 KW Weight: 62 tons Height: 4800mm The machine will be reconconditioned with new electric

Condition: good (used), Year of construction: 2008, Functionality: fully functional, turning length: 350 mm, turning diameter: 250 mm, Fanuc Oi Mate-TC control 3-jaw chuck 12-fold revolver tail stock chip conveyor Technische Daten: / technical details Schwingdurchmesser / rotary diameter 400 mm Drehdurchmesser / turning diameter 250 mm Drehlänge / turning lenght 350 mm Cwfnzuyejw X-Weg / X-travel 160 mm Z-Weg / Z-travel 350 mm max. Drehzahl / max. spindle speed 6000 UpM /rpm Anzahl der Revolverplätze / number of tool places 12 Antriebsleistung Spindel / drive capacity spindle 7,5/11 kW Gewicht ca. / weight ca. 2200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm Nhmupbblbn coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.