HERBOLD mill

HERBOLD SMP 4530 F9-2

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 Cjdetvau Aopfx Ah Iogp This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Cgodpfx Ahjxlknms Iep Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: like new (used), Year of construction: 2022, operating hours: 6,000 h, machine/vehicle number: 006424, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, This very young baler is sold by Bollegraaf Recycling Solutions. This is a HBC100 (75kW) baler featuring cross wires, FULL HARDOX, and a Bollegraaf chain conveyor with Bordoflex. Both the chain conveyor and the baler are equipped with all possible options for maximum efficiency in baling all types of plastics. Both units were built in 2022 and have very few operating hours. The previous owner purchased a new Bollegraaf system and traded in the machines in question. After disassembly, this baler is sold with a 3-month warranty. HBC100K Baler (75kW) 390mm supports Intermediate hopper Conveyor chute Cgsdpfx Aexvh Eweh Iep Platform with caged ladder Additional photocells Frequency controller for the main motor for energy savings APCP (adaptive self-learning channel pressure control for consistently optimal bale weights) Cross wires (3 horizontal wires and 5 vertical wires) Full Hardox lining inside the baler Bale exit Hydraulic lifting mechanism for both knotting sections for improved accessibility/maintenance Bale length display Air conditioning on the control panel Chain conveyor frequency controller Hydraulic oil heater Hydraulic unit cooler 4G modem for remote support Chain conveyor Bollegraaf HBT 1200/1800*20400 Equipped with Bordoflex for extra chain protection Dirt discharge plate Supports Chain lubrication

Condition: used, HERBOLD Zigzag Separator (Gravity Separator) Type SZS 630/212 Separation channel: 630 mm wide With 7.5 kW blower Material: ordinary steel With inlet cyclone and rotary valve Cgodpjyhnliefx Ah Ijp

Condition: used, Year of construction: 2023, HERBOLD zigzag classifier (gravity classifier) Type SZS 630/175 Cgjdpfx Ahsxgrzwe Iop Sifting channel 630 mm wide With blower 7.5 kw Material: mild steel Condition: unused Year of construction 2023

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 386, pressing force: 50 t, filling opening width: 1,110 mm, filling opening length: 1,050 mm, bale width: 1,050 mm, bale height: 730 mm, bale weight: 425 kg, total width: 2,100 mm, total height: 3,100 mm, total length: 5,000 mm, overall weight: 6,800 kg, transport height: 2,400 mm, power: 22 kW (29.91 HP), The press was replaced by a larger one. It was used normally until dismantling. All functions were fully operational. The press is located at Chemnitzer Str. 96, 09212 Limbach-Oberfrohna. Cjdpfx Aeypb Aweh Isgp