AUTOMATIC LOWER LEFT AGGREGATE

HOMAG

Condition: used, Year of construction: 2011, machine/vehicle number: 0-201-50-1289, operating hours: 7,062 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,400 mm, controller model: POWERCONTROL PC 85, plate height: 300 mm, spindle speed (max.): 24,000 rpm, CNC machining center for milling, drilling, and edge banding! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 1,400 mm Maximum panel passage height: 300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Number of controlled axes: 5 axes Number of working stations: 4 Maximum edge height: 65 mm Number of drilling units: 1 Total number of drilling spindles: 21 Total number of vertical + horizontal spindles: 25 Number of milling spindles: 2 Total number of tool changer positions: 77 Barcode reader model: DATALOGIC Work table and workpiece clamping Number of rails: 12 Number of pumps: 1 Flow rate of vacuum pump: 300 m³/h Positioning via NC Vacuum suction cups for workpiece clamping Positioning of vacuum suction cups via NC Drilling unit Drilling unit 1: Top Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Total number of vertical + horizontal spindles: 25 Milling units Dcodpfxsy Uviwj Aqceh Milling spindle 1: Top Number of controlled axes milling spindle 1: 5 Motor power milling spindle 1: 15 kW Speed milling spindle 1: 24,000 rpm Automatic tool change Milling spindle 2: Top Number of controlled axes milling spindle 2: 4 Automatic tool change milling spindle 2: Yes Motor power milling spindle 2: 11 kW Speed milling spindle 2: 12,000 rpm Edge banding unit Number of edge banding units: 1 Maximum panel height: 60 mm Model: POWER EDGE 360° Positioning: Mounted on the main beam of the machine Number of positions edge band roll magazine: 2 Gluing unit Glue tank for hot melt adhesive Pre-melter for hot melt adhesive Tool magazines Number of tool magazines: 4 Positions tool magazine 1: 72 Position tool magazine 1: At the rear of the machine Positions tool magazine 2: 2 Position tool magazine 2: At the rear of the machine Positions tool magazine 3: 2 Position tool magazine 3: At the rear of the machine Positions tool magazine 4: 1 Use tool magazine 4: Only for saw unit D: 350 mm MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: POWERCONTROL PC 85 EQUIPMENT Work table pod and rail NC-positioned workpiece clamping Vacuum suction cups Vacuum pump Drilling unit on top 2 milling spindles POWER EDGE 360° edge banding unit Glue tank for hot melt adhesive Pre-melter for hot melt adhesive Edge band roll magazine 4 tool magazines Barcode reader DATALOGIC Protective screen Chip conveyor CE marking Safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8527

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Dedpfxoy Ur Hls Aqcoch Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, operating hours: 7,610 h, input voltage: 400 V, input current: 10 A, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, TECHNICAL DETAILS Overall height: 1,650 mm Overall length: 4,400 mm Overall width: 1,000 mm Color: Gray Operating hours: 7,610 Dcsdpfjy Tnuvox Aqcjh MACHINE DETAILS Weight: 2,500 kg Year of manufacture: 2018 Documentation available: No CE marking present: Yes CE certificate available: No Serial number: Itsbn Dztwjy Ewv Tj Tsg Voltage: 400 V Power consumption: 10.3 A Fuse: 16 A Transport dimensions: 4,400 mm x 1,000 mm x 1,650 mm (l x w x h) Transport weight: 2,500 kg Transport packages: 1 EQUIPMENT Pre-milling unit Gluing unit Pressure rollers Cutting unit Rough milling unit Radius pulling unit Corner rounding unit Surface pulling unit Brushing unit

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 0-200-03-9040, functionality: fully functional, edge thickness (max.): 20 mm, feed rate X-axis: 18 m/min, year of last overhaul: 2025, The machine underwent a complete overhaul on November 10, 2025, and was fitted with two new adhesive tanks. The machine has been serviced annually; in 2023, the software and computer system were completely replaced. The machine is equipped with the following units: Gluing/pre-coating unit Pressing zone Cutting unit (HL) Milling unit (MFL) Profiling unit (PN) Polishing unit (SM) Gluing system FE-MA-TECH Advanced PUR 2 kg TECHNICAL DETAILS Feed speed: 18 m/min Panel thickness: 10 - 60 mm Edge thickness: 0.3 - 20 mm Dedpszap H Sefx Aqcjch MACHINE DETAILS Gluing system: FE-MA-TECH Advanced PUR 2 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Working range X: 4000 mm Working range Y: 1600 mm 5-axis electrospindle, power 11 kW, HSK 63F connection Number of vertical drilling heads: 17 Horizontal drilling head with cross positioning + blade Milling and grooving unit 360° gluing unit Combined edging/scraping unit Edge banding magazine with 2 stations Circular magazine with 12 stations Control system: Power Control PC 85 WoodWop7.1 (updated in 2018, cost approx. €9,500) Work table with 8 rails and suction cups Dsdpfxsyprr Ns Aqcoch Elmo Rietschle vacuum pump Safety mats Chip conveyor Includes 4 tooling heads (grooving blade, edger, combined scraper/edger, 4-outlet horizontal drilling), and suction cups. Only approximately 4,100 operating hours. Machine in excellent condition Available immediately

Condition: good (used), Year of construction: 1998, functionality: fully functional, Equipment: CE marking, Processing line for solid wood and MDF boards, including rotary tables and 2 Weeke 500 drilling machines, with stacking units. The line has been dismantled due to the company ceasing its solid wood operations. The line can be divided, and the machines can be purchased separately. Djdszb D Nkopfx Aqcjch

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, Colour: Grey - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit Djdpfx Aox Ei Syoqcech - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 008522, Position 1: Robot HOMAG + KUKA-KFL10 + KR Position 2: Single Edgebanders HOMAG + KUKA-KFL10 + KR Position 3: Robot HOMAG + KUKA-KFL10 + KR Djdpfx Ajy Nx U Esqcjch Position 4: Panel Return Systems HOMAG + KUKA-KFL10 + KR

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Dcjdpey In Dgsfx Aqcjh Operating Units: 8 nr

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Dodpfx Aey In A Njqcjch Maximum panel thickness: 60 mm Operating Units: 8 nr