VERTICAL MOULDING GROUP

HOMAG

Condition: used, Year of construction: 2008, total height: 1,800 mm, total length: 10,000 mm, total width: 2,200 mm, Weight: 5.500 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Rough milling unit Bjdpfx Aeychw Ijd Aslg - └ 6th unit type: Radius scraping unit - └ 7th unit type: Flat scraping unit - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 10000mm x 2200mm x 1800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, Woodworking centre Homag PROFI BOF 411/45/PM. Used condition. Bodpfxsydqx Rj Ad Aolg

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge Gluing System: EVA Hotmelt Premilling Unit: yes Bljdsy In Dgopfx Ad Aeg Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge Bedpfx Ajy In A Nsd Ajlg Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Maximum panel thickness: 60 mm

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Bjdpfsy In A Asx Ad Aolg Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Blodpfx Adjy In Avj Asg Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes Blsdpjy In Apofx Ad Asg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Table thickness: 60 mm. Thickness of coiled material: 3 mm Release agent application device Sanding unit Gluing unit Edge pressure unit End trimming unit Blsdpsy Icgpefx Ad Aog Milling unit Edge rounding unit Edge scraper unit Glue scraper unit Cleaning device Brush unit Control: Homag powerTouch

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-200-21-3286, functionality: fully functional, input voltage: 400 V, input current: 56 A, type of input current: three-phase, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 79/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the right side. Year of Manufacture: 1999 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x3.5kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop Blodpfjy H Hzbex Ad Ajg - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN11, with auto-revolver positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: HOMAG SAWTEQ B-200 (HPP200/32/32) — Automatic Panel Saw We are offering a HOMAG SAWTEQ B-200 automatic panel saw, model HPP200/32/32 — a high-precision machine designed for cutting both laminated and unlaminated panels from wood-based materials. Machine highlights The saw features a motor-adjustable pre-scoring unit, a 21" Full HD multitouch display, and HOMAG's CAD MAtic control system with 2D and 3D cut plan visualisation. Positioning is handled by a maintenance-free electromagnetic system with ±0.1 mm accuracy. Remote diagnostics are available via TeleServiceNet. The saw carriage runs at 1–80 m/min and is driven by a toothed belt and gear system — no lubrication required, no resonance effects, and precise positioning guaranteed. A 10-year warranty is included on the carriage guides. The pressure beam provides identical pressure across the full panel width, eliminating parallelism errors and material damage. The optimised dust extraction keeps emission levels well below prescribed limits. Technical specs Cut length 3,200 mm, cut depth 3,100 mm, blade height 65 mm, working height 920 mm. Main motor 7.5 kW (optional 9.2 kW). Power supply 400 V / 50 Hz. Air pressure required: 6 bar. Included with the machine Bledpfx Adey Huv Tj Aeg The sale includes an 11 kW main saw motor (50 Hz), 4 manual stops for pre-laminated pieces, 3 roller elements for the front table, CAD Plan 4 cut optimisation software, pressure beam height control, Slovenian-language documentation and on-screen texts, and packaging. The machine is CE certified, GS tested, and complies with BGI 739-1.