FDR ENGINE

HOMAG

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Bjdpfx Aey In Dged Aedb Max feed speed: 25 m/min Maximum panel thickness: 60 mm

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge Gluing System: EVA Hotmelt Premilling Unit: yes Bdodpfxsy In A No Ad Asb Corner Rounding Unit: yes Grooving Unit: yes Maximum panel thickness: 60 mm

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Bdsdpsy In A Asfx Ad Aeb Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Bdodpfx Aoy In Aved Ajb Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes Bdodpfx Ajy In Apsd Ajb

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Table thickness: 60 mm. Thickness of coiled material: 3 mm Release agent application device Sanding unit Gluing unit Edge pressure unit End trimming unit Milling unit Edge rounding unit Edge scraper unit Glue scraper unit Cleaning device Bdedpfxey Icgpe Ad Asb Brush unit Control: Homag powerTouch

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-200-21-3286, functionality: fully functional, input voltage: 400 V, input current: 56 A, type of input current: three-phase, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 79/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the right side. Year of Manufacture: 1999 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x3.5kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: Bdjdpfey H Hzbex Ad Aeb - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN11, with auto-revolver positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: HOMAG SAWTEQ B-200 (HPP200/32/32) — Automatic Panel Saw We are offering a HOMAG SAWTEQ B-200 automatic panel saw, model HPP200/32/32 — a high-precision machine designed for cutting both laminated and unlaminated panels from wood-based materials. Machine highlights The saw features a motor-adjustable pre-scoring unit, a 21" Full HD multitouch display, and HOMAG's CAD MAtic control system with 2D and 3D cut plan visualisation. Positioning is handled by a maintenance-free electromagnetic system with ±0.1 mm accuracy. Remote diagnostics are available via TeleServiceNet. Bdedpfx Aoy Huv Tjd Asb The saw carriage runs at 1–80 m/min and is driven by a toothed belt and gear system — no lubrication required, no resonance effects, and precise positioning guaranteed. A 10-year warranty is included on the carriage guides. The pressure beam provides identical pressure across the full panel width, eliminating parallelism errors and material damage. The optimised dust extraction keeps emission levels well below prescribed limits. Technical specs Cut length 3,200 mm, cut depth 3,100 mm, blade height 65 mm, working height 920 mm. Main motor 7.5 kW (optional 9.2 kW). Power supply 400 V / 50 Hz. Air pressure required: 6 bar. Included with the machine The sale includes an 11 kW main saw motor (50 Hz), 4 manual stops for pre-laminated pieces, 3 roller elements for the front table, CAD Plan 4 cut optimisation software, pressure beam height control, Slovenian-language documentation and on-screen texts, and packaging. The machine is CE certified, GS tested, and complies with BGI 739-1.

Condition: ready for operation (used), Year of construction: 1996, cutting length (max.): 3,800 mm, Panel saw manufactured in 1996. This HOMAG HPL 11/38/22 features a cutting length and width of 3800 mm, with a lifting table payload of 7 tons. It includes 7 clamps and automatic height control for efficient panel feeding. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG HPL 11/38/22 machine we have for sale. Contact us for further details. • Cutting width (program pusher travel): 3800 mm • Clamps: 7 units (with 2 optional additional clamps possible at positions 150/350) • Clamp spacing: 50 / 250 / 450 / 850 / 1550 / 2250 / 3050 mm (measured from angular fence to clamp center) • Air cushion tables (front of machine): • 1x at angular fence: 2810 x 650 mm • 2x: 2160 x 650 mm Additional equipment • Lifting table for batch-wise panel feeding: • Dimensions: 3800 x 2200 mm Bdodpfx Adsy Hr Nks Ajb • Payload: 7 tons • Stacking height (floor level): max 680 mm • Stacking height (in-pit installation): max 880 mm • Automatic height control via control console • Heavy-duty roller conveyors (2x): Type HER 38/22 L, non-driven, longitudinal transport, forklift slots, 18 rollers, height 330 mm, roller Ø 108 mm, spacing 198.5 mm • Roller conveyor drive units (2x): Type 38/22, speed 12 m/min • Stacking station: LIFT-EX Type HAZ Ausf. A for stacking divided formats • Label printing system

Condition: ready for operation (used), Year of construction: 2016, Edgebander manufactured in 2016. This HOMAG KAL 370 features a continuously adjustable feed speed of 18-20 m/min and accommodates workpiece thicknesses from 8 to 60 mm. It includes advanced gluing and trimming units, as well as a comprehensive software package for efficient operation. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KAL 370 machine we have for sale. Contact us for further details. • Feed speed: Continuously adjustable 18–20 m/min • Fixed stop side: Left • Workpiece thickness: 8–60 mm • Workpiece overhang: 30 mm • Throughput equipment: Pre-installation for Boomerang TFU140 • Feed lock: Available • Feature packages: Future-Paket 5; Foil/High-Gloss Package (bottom) • Infeed features: Sliding carriage; Workpiece alignment at infeed; Workpiece support with roller track; Infeed barrier • Workpiece transport: Transport device; Top pressure • Cleaning/Prep: Release agent spraying unit (top/bottom) • Jointing/Milling: Joint trimming unit; I-System-DIA jointing cutter set WD60; Workpiece pre-heating (up to 60 mm thickness) • Gluing: Gluing unit; Preparation for Airtec activation unit; Adhesive application system; Application units QA60 and PU60; Pressure tank for PU application unit • Magazine/Pressure: Edge magazine; Pressure zone • Spraying: Lubricant spraying unit (top, bottom, side) • Trimming/Milling: Snipping unit HL81 (bevel/straight, 0.8 kW); Pneumatic adjustment for flush/overhang trimming; Pre-milling unit BF10; HM milling cutter set (straight); Form milling unit FK11 • Tooling/Changeover: I-Exchange head system (automatically adjustable/FK); I-DIA radius cutter set (for FK, R=2 mm, Z=4); Standard milling unit SF21; Multi-profile scraper MN21 (automatic); Profile knife set for MN20/21 • Additional units: Joint scraper FA20 BASIC; Automated scanning for joint FA20; Buffing unit FA06 (top/bottom); Powercontrol PC23 Powertouch • Control/Software: Software package WoodCommander; Antenna sequence control; Machine data acquisition and evaluation; Error diagnosis; Teleservicenet-soft • System/Networking: Emergency stop interlock; Network connection (Ethernet); Manual control for setup mode; Language: German • Documentation: On data carrier and paper Additional equipment Bdsdpfx Aey Hrtpjd Asb • Boomerang return system TFU140/20/08-Optimat • Workpiece detection (sensor-based) • Basic outfeed return line • CE for cells (systems)