CPU 68340 HC010

HOMAG

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, overall weight: 4,000 kg, TECHNICAL DETAILS Overall height: 2,200 mm Overall length: 7,500 mm Overall width: 1,500 mm MACHINE DETAILS Weight: 4,000 kg Year of manufacture: 2007 Voltage: 400 V Lrsdpfoy Akytjx Akysk Power consumption: 46 A Fuse: 63 A Transport dimensions: 7,500 mm x 1,500 mm x 2,200 mm (L x W x H) Transport weight: 4,000 kg EQUIPMENT Tools included: Yes (for 1st, 3rd, 4th, 5th, 7th, and 8th unit) Tools included: No (for 6th unit)

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 0-341-73-4415, functionality: fully functional, operating hours: 4,522 h, power: 7.5 kW (10.20 HP), cutting width (max.): 3,200 mm, saw blade diameter: 310 mm, saw blade bore: 60 mm, overall weight: 5,000 kg, TECHNICAL DETAILS Maximum cutting width: 3,200 mm Ljdpfx Akoy Ai Upsyjrk Maximum cutting length: 3,200 mm Saw blade projection: 65 mm Maximum feed speed: 60 m/min Programmable pusher speed forward: 25 m/min Programmable pusher speed backward: 60 m/min Saw carriage speed: 60 m/min Manual crosscut stops: 4 units Saw blade bore diameter: 60 mm Maximum saw blade diameter: 310 mm Scoring unit bore diameter: 45 mm Scoring saw blade diameter: 150 mm MACHINE DETAILS Control: CADmatic 5 Main saw motor: 7.5 kW Operating hours: 4,522 Dimensions & Weight Transport dimensions: 8,000 x 2,400 x 2,000 mm Transport weight: 5,000 kg EQUIPMENT Intelliguide optical LED guidance system 1 air table 2,100 x 650 mm with roller elements 2 air tables 1,800 x 650 mm with roller elements 21.5-inch touchscreen CAD Plan 4 optimization software Clamping fixtures: 50, 250, 450, 1200, 2000, 2700 mm Scoring saw unit

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Lsdpsyzxa Eofx Akyork Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: excellent (used), Year of construction: 2013, operating hours: 3,000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups Venture 316 Future Package 10 extraction rails, Power-Clamp connection, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units, single operation: 3300 mm; pendulum operation: max. 1740 mm Tool diameter 25 mm: single operation: 3475 mm; pendulum operation: max. 1915 mm – Workpiece width: Front stop: 950 mm all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping devices – Up to max. 60 mm with standard clamps SAFETY AND PROTECTIVE EQUIPMENT: EC-compliant; Safety enclosure on the right with door Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer (side mounted) Drilling head with 16 spindles (V12/H4/S0/90°) DRIVE5C+ interface for aggregates Lrodpfx Ajy E Npfskyok Tool length measuring probe Software for position measurement and CNC coordinate rotation Tool transfer station Coolant tank for processing spindle Vacuum pump 300/360 m3/h Powerclamp pneumatic package Control system: POWERCONTROL PC85 with POWERTOUCH system; IPC POWERPACK Operator terminal for program start; camera system with tablet PC WOODWOP CAD/CAM standard interface Documentation and control texts: German Delivery includes only the tools and HSK tool holders shown in the images!

Condition: used, Year of construction: 2018, functionality: fully functional, Power supply: 400 V Y/230 V N, 3-phase, 50 Hz Maximum operating current at full load: 44 A Fuse: 50 A Control voltage: 24 V Dimensions: 6514 x 9963 x 4786 mm Lrodpfx Akoy Ezvkjysk Weight: 5500 kg

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edgebander, year of manufacture 2021. The package includes a KOGI dual-bag chip extractor, 2.2 kW / 1650 Pa. The machine comes with an additional glue pot. An appraisal report is attached in the PDF. Type: EDGETEQ S-240 PROFI KDF 230 Machine number: 0-261-73-7111 Year of manufacture: 2021 Lrodpfx Akey Exwfoyok Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum full-load current: 17.3 A Fuse: 20 A Short-circuit current: 5 kA Control voltage: 24 V Enclosure rating: NEMA 1 Largest motor: 4.6 A Largest heater current: 2.3 A If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2021, input frequency: 50 Hz, input current: 21 A, We offer this used HOMAG DRILLTEQ V-200 through-feed drilling machine, year of manufacture 2021. The machine has been regularly serviced by HOMAG. The package includes a KOGI 2.2 kW/1650 Pa two-bag extraction unit and various tools. Ledpfey Extmjx Akysrk Type: DRILLTEQ V-200 OPTIMAT BHX050 Serial number: 0-250-73-6562 Year of manufacture: 2021 Power supply: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Rated current at full load: 21 A Fuse: 25 A Control voltage: 24 V If you have any questions or need further information, please send us a message or contact us by phone.

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2500 mm Main saw blade projection: 110 mm Lrjdpfx Ajygtbmekysk No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4

Condition: used, Year of construction: 2018, operating hours: 7,610 h, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, Weight: 2.500 kg Price: On request - Details: - └ Description: Machine currently still has a malfunction to be fixed - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 7610 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4400mm x 1000mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Lredpfxoy Ewv Tj Akysk VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2016, This 4-axis HOMAG PROFI BMG 512/40/12/V/A was manufactured in 2016, featuring a POWEREDGE gluing unit and a 4-fold edge magazine. It includes an 18-fold disc tool-changer, a 12 kW processing spindle, and a C-axis with unlimited swivel range. The machine supports workpiece lengths up to 4000 mm and thicknesses up to 300 mm. Ideal for advanced woodworking, it offers dynamic space allocation for optimal processing area utilization. Contact us for more information about this machine. Additional information Workpiece • Lengths: 4000 mm for single placement / 2250 mm for pendulum placement • Widths: 1450 mm for all units and front stop • Maximum Workpiece Thickness: 300 mm (including clamping devices) • Up to 60 mm with standard clamps without restrictions for units and extraction. Table • Automatic Console Table • Automatically adjustable console table • 8 consoles Y = 1500 mm • 16 side and stop pins 140 mm, electromechanically controlled • Dynamic space allocation for optimal utilization in pendulum operation Lrjdex D Nzvjpfx Akyok • Various double vacuum clamps • Without vacuum pump; supplied via a building-side vacuum system Tools • 18-fold disc tool-changer Main Drive • Processing Spindle: 12 kW (S6 operation) / 9.5 kW (S1 operation) • Spindle with hybrid bearings • Frequency-controlled rotation: rpm • Automatic feed reduction with decreasing spindle speed Injection Unit • POWEREDGE Gluing Unit • Gluing unit for 360° edge gluing on butt joints • Glue application via application roller onto edge material • 1 pressure roller Ø 50 mm, 1 follow-up roller Ø 35 mm • Max. edge height: 65 mm • Edge thickness: 0.4 - 3 mm (veneer 0.4 - 2 mm / PVC 1.0 - 2 mm) • Hot air nozzle for heating thick edges on small radii, controllable via NC Machine Control • POWERCONTROL PC 86 POWERTOUCH • With 21.5" Full-HD multitouch display • WoodWOP for graphical, dialog-oriented creation of CNC programs • Diagnostic system WOODSCOUT Additional Equipment • Interface for FLEX 5 unit • C-axis with unit interface • Unlimited swivel range • Coupling element for automatic tool change of FLEX 5 unit • Drilling Head • 21 spindles V17 / H4 / S0 / 90° • 17 vertical drilling spindles with quick-change system • T-shaped arrangement: 7 spindles in Y-direction / 11 spindles in X-direction • 4 horizontal spindles with saw 0 / 90° • Pre-cutting Station • Moves with the processing portal (X-axis) • Saw / Trimming Unit for Tool Changer • Combined trimming and corner rounding unit, sensor-controlled • Combined flush-trim / pull-knife unit Extra Information • Coolant tank for processing spindle • Integrated chip conveyor, discharging to the leftNote: The technical data and descriptions are for informational purposes only and are not binding.