Four-way side loader

Hubtex MQ45

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 101 h, load capacity: 4,500 kg, lifting height: 6,540 mm, free lift: 2,140 mm, fuel type: electric, mast type: triplex, construction height: 3,242 mm, fork carriage width: 3,540 mm, fork length: 1,200 mm, empty load weight: 8,740 kg, total length: 3,480 mm, drive type: Elektro, construction width: 2,250 mm, Four-way side loader Load centre: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: triplex Condition: ready for operation and fully functional Technical condition: very good Dedpfeyp Nyqex Adgoup Front tyres type: cushion Rear tyres type: cushion Battery voltage: 48V Battery capacity: 930Ah Description: In addition to this Hubtex model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase & financing on attractive terms are always possible. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this PHOENIX MQ45. P.S.: Our master forklift workshop specialises in repairs, maintenance, overhauls and custom builds for forklifts from 8 tonnes. We are also happy to offer your machine for commission sale on our premises. Fork positioner, Fork positioner opening range: 560 / 3500 mm Full cabin, full free lift, Height-adjustable cabin; HX steering

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Duodpfx Aotmqi Djdgsp Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm We offer here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used material color: blue frame profile: 76.2 - 100 mm Duodpehm Stzofx Adgep stand height: 900 mm stand depth: 1.000 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: orange box profile: 85 x 40 mm type of truss: GN85x41mm clear width: 2.775 mm 08x safety pins, used finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 - 46 mm width chipboard: 2.980 mm depth chipboard: 1.000 mm Surface: coated if necessary (two-part if necessary) 01x chipboard II. Choice, used thickness chipboard: 38 - 46 mm width chipboard: 2.755 mm depth chipboard: 1.000 mm Surface: coated if necessary (two-part if necessary) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: new, MANURHIN K'MX 620 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. The machine is equipped as standard with two electro-spindles with a maximum speed of 12,000 rpm and a rotating guide bush synchronised with the main spindle by means of pulleys and belts. Main features: - Max. bar material diameter 20 mm - 12,000 rpm on both spindles - Main spindle power 3.7/5.5 kW - Spindle travel 210 mm Dujdeuqngqepfx Adgjp - Number of tools in the cut at the same time: 2 - Power of rotating tools: 2kW - Number of stations: 22, 9 of which can be motorised