Planer

Hundegger

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Submitting a bid obligates the bidder to collect the equipment on time, no later than week 46. TECHNICAL DETAILS Machining Area Cross-section: 20 × 60 to 300 × 450 mm Material Feed Infeed cross conveyor: 7 strands Conveyor length: 2.2 m Saw Unit Saw: Undercutting swiveling miter saw Milling Units Milling unit: Universal milling machine Tools for universal milling machine: Roller cutters and finger cutters Vertical Combination Support Drilling units: 1 unit Finger cutter: 1 unit Horizontal Combination Support Drilling units: 2 units Grooving tool: 1 unit Workpiece Handling Beam turning station: fully automatic Ndeds Aayqwjpfx Aitsc Foundation and Installation Minimum floor slab thickness: 10 cm Floor slab requirements: level, sufficiently reinforced, and suitable for anchoring Electrical Data Voltage: 400/230 V, 3/N/PE Fuse rating: 3 × 63 A Frequency: 50 Hz Peak demand: 15 kW Compressed Air Supply Volume flow: max. 600 l/min Operating pressure: 8.5 bar Permissible pressure: max. 10 bar Control System Retrofitting: Fall 2020 by Hundegger Control system: CAN bus control Previous control system: MIPPS EQUIPMENT Infeed cross conveyor with 7 strands Undercutting swiveling miter saw Universal milling machine Roller cutters Finger cutters Combination support for vertically operating tools Drilling unit, vertical Finger cutter, vertical Combination support for horizontally operating tools 1 drilling unit, horizontal Grooving tool, horizontal Fully automatic beam turning station

Condition: new, Year of construction: 2025, functionality: fully functional, Material receiving unit for four-sided planer OF-100 Nodpfx Asx Ad Uujitjdc Maximum and minimum working length: 1800 – 6100 mm Maximum and minimum working width: 25 – 247 mm Motor power: 0.75 kW Receiving speed: 20 – 100 m/min Cross belts: 7 pcs

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Hundegger K1A Used machine, available from a Swiss liquidation, in good condition. Includes infeed and outfeed systems. Ndsdpfx Ais Afhm Rstsc Mechanized.

Condition: like new (used), Year of construction: 2020, operating hours: 1,329 h, functionality: fully functional, Equipment: safety light barrier, Hundegger SC 3 Speed-Cut – model year 2020, for sale due to new acquisition in May 2027. We are selling our fully automatic cutting system, Hundegger SC3 Speed-Cut, model year 2020. Machine equipment: - SC 3 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Automatic cross-section control, Y-axis - Central lubrication - Combination support for vertically operating tools - Vertical finger milling cutter, 5.5 kW - 4-axis turret milling unit, 7.5 kW - Combination support for horizontally operating tools - Drilling unit, 2.2 kW, drilling direction horizontal - Marking device, bottom - Marking device on horizontal support - Inkjet labeling system Inkjet 4 from the rear - Automatic feeding of small components to the front - Wood storage blocks with rollers after feeding - Control unit for disposal with operating buttons Retrofit in May 2023 for €8,500: SC 2100 Drilling unit, 2.2 kW, drilling direction vertical on combination support for drilling up to 24 mm 4-side inkjet labeling system Inkjet 4 FEEDING SYSTEM ALSO INCLUDED IN THE PRICE!!! BEBL feeding system, transverse and vertical General: Year of manufacture: 2020 Operating hours: low, approx. 1329 hours (machine from ongoing operation) Njdpfxoz Dga Ts Aitjdc Material processed: 2272 cubic meters Routine maintenance by Hundegger Condition: very good, like new Contact: Holzbau Gutmann GmbH Reulbacherstraße 18 36115 Hilders

Condition: excellent (used), Year of construction: 2008, Hundegger K2i 625x300mm Undercounter Miter Saw, 11KW saw blade, 800mm, Universal milling unit, 5-axis, Combined support for vertically operating tools, Combined support for horizontally operating tools, Drilling unit 2.2KW, 1x vertical 18mmx460mm and 2x horizontal 7mm, 8mm x650mm. Fully automatic beam turning station, hydraulic, K2i transport and positioning system, electronic control, 6-arm discharge table, Ndedpfjww Nuxjx Aitjc Vertical finger milling cutter 5.5 KW, Longitudinal and transverse grooving cutter 15.5-30mm, Marking and labeling devices on the bottom and back, refined support surfaces (chrome-plated), Adjustable safety impact shield, left and right, saw blade 900 mm. The system is ready for demonstration. Availability: January 2027.

Condition: used, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Year of manufacture: 2004 Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - └ Type Documentation: Technical data, User manual, Maintenance history, Parts book, Electrical diagrams - └ Language: NL, DE - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 Nsdpoyy Nnqofx Aitedc - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2010, machine/vehicle number: 9532, total height: 3,000 mm, total length: 30,000 mm, total width: 3,000 mm, Hundegger SC-3 – CNC Through-Feed Processing Center (Year 2010) Hundegger SC-3 CNC Through-Feed Processing Center For sale is a Hundegger SC-3, year of manufacture 2010, a proven and high-performance CNC through-feed processing center for modern timber construction and industrial wood processing. This machine is ideally suited for timber framing, prefabricated housing production, and high-capacity woodworking operations, offering excellent precision, reliability, and productivity. Key Features: CNC-controlled through-feed processing center High level of automation and efficient material flow Accurate and reliable cutting of timber components Versatile processing options – with suitable optional units or by retrofit / upgrading, additional operations such as drilling, milling, slotting, marking, and labeling are possible Robust, durable design by Hundegger Technical Overview: Manufacturer: Hundegger Model: SC-3 Year of manufacture: 2010 Condition: used, in operational condition Location: Estonia Price: on request / according to listing The Hundegger SC-3 represents a cost-effective solution to increase throughput, precision, and process reliability in timber processing. Ndodpfxsx Rkrfs Aitjc 📩 Further technical details, documentation, and on-site inspection available upon request.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 12636, Manufacturer: HUNDEGGER Model: Hundegger K2i 450 Year of manufacture: 2015 Serial number: 12636 Processable cross-section: 300 × 450 mm Frame length: 13.56 m Max. timber length: 13.0 m Paint: RAL 5012 light blue • ABM-B2 lower table rotating cross-cut saw, 11 kW, Ø800 mm • ABM-3050 five-axis universal milling unit • ABM-3200 block milling unit (4 × 5.5 kW) • ABM-3220 block milling motors (4 × 7.5 kW) • ABM-B4 combined holder for vertical tools • ABM-B5 vertical drilling unit (2.2 kW) • ABM-B6 combined holder for horizontal tools • ABM-5130 horizontal drilling unit (3.0 kW) • ABM-B8 rear marking device Ndsdpfx Aijz R Up Eetjc • ABM-B9 fully automatic beam rotating station • ABM-B10 PW system with standard machine frame • ABM-B11 electronic control system • ABM-B12 outfeed roller conveyor (2.65 m) with pushing unit • ABM-B13 five-arm depositing table • ABM-B14 safety devices and protective fences • ABM-1500 improved timber support surface • ABM-2000 AQF and infeed system, 6-strand extension • ABM-8210 non-driven roller conveyor • ABM-9990 Blockhausfräse tool set • ABM-B1 AQF automatic feed system, 5-strand version • Mortise milling unit (8 × 630 mm) • 45° inclinable horizontal drilling unit (3.0 kW)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: K2i-5-625, total length: 120,000 mm, total height: 3,000 mm, total width: 5,800 mm, overall weight: 14,500 kg, type of input current: AC, Equipment: safety light barrier, Hundegger K2i – 5-Axis Cutting Machine – Year of Manufacture 2015 For sale is a well-maintained and extensively equipped Hundegger K2i 5-axis cutting machine, manufactured in 2015, capable of processing wood cross-sections up to 62 cm. The machine was used in our timber construction facility in a single-shift operation and was not used daily. All annual maintenance services were performed by the manufacturer, Hundegger. The last service was carried out in February 2026. In addition, the head of the main milling spindle (K2-5-U5-TU-10) was replaced. The machine is in a well-maintained, used condition with typical signs of wear and tear due to age and use. Technical Data Manufacturer: Hundegger Model: K2i Year of Manufacture: 2015 Type: 5-Axis Cutting Machine Maximum processable wood cross-section: up to 62 cm Wood lengths: up to 13 m with extended infeed Maintenance: annually by Hundegger Last maintenance: February 2026 Availability: from December 2026 Technical Equipment Processing Units 5-axis universal milling unit Undertable pivoting cut-off saw, 11 kW Combination support for vertically operating tools Vertical drilling unit, 2.2 kW Combination support for horizontally operating tools Horizontal drilling unit Reinforced horizontal drilling unit, 3.0 kW Dovetail milling cutter (60 × 38 × 16.5 mm) Marking device at the rear Marking and labeling device underneath Wood handling and material handling Fully automatic wood infeed Fully automatic hydraulic beam turning station Extension of the feed conveyor and the infeed roller track for wood lengths up to 13 m Roller track for wood removal with ejector Extension roller track, length 5.30 m 5-arm wood storage rack Control and Safety Electronic control with Hundegger production software Remote maintenance Safety devices and guarding Maintenance and Condition The machine was regularly maintained by the manufacturer, Hundegger. Ndedpfx Aez Rixyjitoc Annual manufacturer maintenance Last maintenance in February 2026 Head of the main milling spindle replaced (K2-5-U5-TU-10) Used in a single-shift operation Not used daily Well-maintained condition with normal signs of wear Availability, Dismantling and Collection The machine is available from December 2026. Complete dismantling, loading and collection must be carried out by the buyer independently and at their own expense. An inspection is possible by prior appointment. Contact If you are seriously interested in purchasing the machine or have any questions, please do not hesitate to contact us. Further technical information and inspection appointments are available upon request.

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Nsdpfx Aszyihueitjdc Marking device, bottom Marking device, front Angled conveyor, right

Condition: good (used), Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 1200, Hundegger P10 – Year of manufacture 1992 – partially modernized control system – good mechanical condition For sale: well-maintained Hundegger P10 cutting machine, year of manufacture 1992, with extensive equipment. Mechanical components in good condition, control system modernized (data import via USB drive, DOS conversion). 3 measuring scales are missing – the price reflects this. The machine is currently still in operation and can be tested on-site. Technical equipment: Swivel saw, notching milling cutter, rafter nail drilling unit, edge bender, blade milling cutter, horizontal and vertical drill Three-sided cutter, vertical milling cutter, finger cutter, panel cutter, ejector and transverse conveyor For an additional charge, the machine can be delivered throughout Europe – Delivery does not include unloading or assembly. Ndjdpfszu Anwsx Aitsc Currently, the cutting system is being dismantled for transport and temporarily stored. A demonstration in operation is no longer possible. However, a video in processing mode can be provided for a better assessment.