Paper cutting machine

Ideal

Condition: excellent (used), functionality: fully functional, IDEAL Stack Paper Cutter 5221-95 EP with automatic clamping and programmable backgauge control 520 mm cutting length 80 mm insert height 35 mm residual cut Electromechanical drive for blade and clamping bar. Electrically operated backgauge with EP control module. Digital measurement display, readings in cm/inch (accuracy to 0.1 mm). Direct input of measurements via numeric keypad. Memory key for repeat (chain) cuts. Programmable EP control for 99 programs, each with up to 99 steps (up to 9 dimensions can be saved as a single program step). Program steps can be recalled via Start button. Automatic set function for reference dimension. Programmable paper feed (EJECT). Electronic handwheel with infinitely variable speed for manual fine adjustment of the backgauge. Optical cutting line indicator. Clamping bar guided on both sides, can be operated independently from the blade. Precision backgauge spindle. Adjustable backgauge comb with fine pitch and plastic guides. Two side guides each on the front and rear table. High-quality blade made of premium knife steel. Full steel blade carrier and adjustable blade guides. Two additional side tables included. Comprehensive SCS safety package: Electronically controlled, swiveling safety guard on the front table; transparent safety cover on the rear table; main switch and safety lock with key; two-hand cut operation with repeat cut lock and simultaneous release control; 24-volt control system; patented IDEAL safety drive; automatic return of blade and clamp from any position; disc brake for instant blade stop; blade changing device with covered cutting edge; blade depth adjustment from outside; easy front blade change without removing housing parts. Power supply: 230 V / 50 Hz / 1~ Motor power (rated input): 1.1 kW. Dimensions: H 1260 x W 855 x D 1067 mm. Weight: 262 kg. The machine was under a maintenance contract. 2 side tables, spare blade, and 3 cutting sticks included. Shipping available. Please note: Our offers are for used machines, which may show signs of prior use (minor scratches or yellowing may occur). Bledpfx Ahoypfpbs Isd

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, working range: 40 mm, Flash butt welding machine IDEAL BAS 040 – very good working condition For sale is a butt welding machine IDEAL, model BAS 040, suitable for carpentry shops, sawmills, woodworking plants, or for the custom production of bandsaw blades. Technical data: Welding of wood bandsaw blades: 6 mm – 40 mm Bodpeynttxofx Ah Ijld Welding of metal bandsaw blades: 13 mm – 27 mm Year of manufacture: 2008 Rugged and reliable construction, typical for the IDEAL brand Consistently perfect weld seams Very good working condition The machine is fully functional, has been regularly maintained, and is ready for immediate use. No additional investment required. For further information, photos, or to arrange a demonstration, please contact me.

Condition: used, Year of construction: 2015, Type: LBS043 / 80 / 1.5 Coil joining machine. With Fronius Trans Tig 2200 Job G/F Arc welding machine. Pneumatic clamping. Bjdpfx Aslddxhjh Ield Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 mm. Used machine in working condition. Strip width: 15 – 80 mm. Strip thickness: 0.5 – 1.5 mm. Power: 400 V / 50 Hz. Shears on the right not included. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: GA0500VBG1780, working width: 1,600 mm, wire diameter (max.): 8 mm, type of input current: three-phase, nominal power at 50% duty cycle: 100 kVA, input voltage: 400 V, air pressure: 6 bar, electrical fuse: 800 A, We are offering this used Ideal GAE 516/07-07-20 mesh welding machine, manufactured in 2017. Manufacturer: Ideal Model: GAE 516/07-07-20 Year of manufacture: 2017 Condition: used Machine type: mesh welding machine For resistance welding using single-phase DC technology, suitable for shopfitting and industrial mesh panels, wire shelves, reinforcements, and other wire products. Bedpoym Aqdefx Ah Ijld Special features: - Loading magazine for flat bars (maximum 2,000 mm) - Automatic feeding of lower cross wires (4 - 8 mm) for the production of double wire mesh panels - 2 units of trimmers for shearing off cross wire ends on the welded product The machine is fully operational and can be inspected in operation. Only approximately 80,000 mesh panels have been produced on this machine in total. Mesh width: 250 – 1,600 mm Mesh length: 450 – 2,200 mm Welding width: 1,600 mm Longitudinal wire diameter: 2.5 – 8 mm Cross wire diameter: 2.5 – 8 mm Minimum longitudinal wire spacing: 25 mm Minimum cross wire spacing (clear width): 10 mm Pneumatic welding cylinders: 7 units Three-phase current 400 V / 50 Hz Fuse: 800 A/phase Air pressure: 6 bar Air consumption: 20.0 Nl/cycle Cooling water consumption, 4 bar, 21-25°C: approx. 80 l/min. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 6173431, Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago Blodpoulxg Defx Ah Ied

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1504369, Cutting length: 800 mm Format: DIN A3 Cutting capacity: 20 sheets (paper weight 70g/m²) Table size: 605 x 800 mm (W x D) Blodpfxevnmkye Ah Ijd Professional lever cutting machine IDEAL 1080 with automatic safety. The IDEAL 1080 can cut formats up to DIN A3 and also DIN A2 crosswise with a cutting length of 800 mm. The maximum cutting capacity is approx. 20 sheets of 70 grams. The stepless back stop can be locked. The sheets of paper are securely fixed before the cutting process using a foot pressure. This creates precise cuts. In addition, a transparent, fixed blade guard made of shatter-proof plastic offers optimal safety. The durable blades are made of high-quality Solingen knife steel and can also be resharpened if necessary. GS tested!

Condition: good (used), IDEAL EBA 5560 Hydraulic Guillotine A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple to operate, yet with the performance of a large industrial machine. The machine was used in an office and is the latest product from the German manufacturer Ideal. Control: 99 programs, each with 99 steps Data entry via LCD touchscreen Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Switching mm/inch Hydraulic knife and pressure beam drive Photocells Side tables Cutting line Bledoymxlkjpfx Ah Ied Technical data: Cutting length: 550 mm Infeed height: 95/92 mm – with under-beam bar Infeed depth: 570 mm Front table depth: 460 mm Minimum final cut: 32/60 mm – with under-beam bar Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 369 kg Dimensions: 1520 x 1400 x 1370 mm

Condition: used, Year of construction: 1997, functionality: fully functional, Model: BAS 100. Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing timer. Blade positioning device. Year of manufacture: 1997. Automatic annealing temperature control. Welding wood strip up to 100 mm. Bimetal strip up to 80 mm. Blsdow Snpiopfx Ah Isd Connection: 3 x 220 V. (3 x 400V available on request) Weight: 500 kg. Dimensions (W*D*H): 1400*900*1500 mm. Instructions and packing included.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 935 590, STC-Ref:G-291-0023 IDEAL 5221-A, Year: 05/1989 format: 0 x 520 mm equipped: - cutting width 520 mm - cutting hight 80 mm - cutting depth: max. 520 mm - electromechanical knife drive - automatic pressing - spindle-guided backstop - Electric carriage forward and reverse movement - digital measurement display - 1 spare knive Bedsyl Iz Eopfx Ah Ijld --> available: 03/2026

Condition: used, Year of construction: 2009, functionality: fully functional, cutting width (max.): 520 mm, insertion depth: 520 mm, insertion height: 80 mm, overall weight: 325 kg, type of input current: AC, Equipment: safety light barrier, Stack cutter with hydraulic clamp – ideal for digital printers. 520 mm cutting length – electro-mechanical blade drive – hydraulic drive for the pressure bar – infinitely adjustable clamping pressure with manometer display – foot pedal for pre-clamping or as a cut indicator – clamp bar cover – electrically operated back gauge with fully programmable "EP" control – electronic handwheel with stepless speed adjustment for fine manual back gauge positioning – optical cutting line indicator with high-intensity LEDs – pressure bar guided on both sides for even pressure – precision back gauge spindle – adjustable back gauge rack with fine pitch and plastic gliders – two side lays each on front and rear tables – solid steel knife carrier and adjustable knife guides – high-quality blade made from "Solingen knife steel" – comprehensive "SCS" safety package. Cutting length: 520 mm Cutting height: 80 mm Residual cut: 22 mm Table depth: 520 mm Power supply: 230 V / 50 Hz Bedpsylwywjfx Ah Ijld Motor power (rated input): Blade drive: 1.1 kW Clamp drive: 0.32 kW Back gauge drive: 0.1 kW Motor protection switch as standard Dimensions: H 1260 mm, W 855 mm, D 1085 mm