Bench Drilling Machine

IXION BT 23 ST

Condition: ready for operation (used), Year of construction: 2000, number of spindles 25 -1500 U/min Stufenlos bore capacity in steel (diameter) 23 mm bore stroke 120 mm table clamping surface: 1250 x 340 mm Pgodpfxevr Hlrs Ab Sor taper MK MK3 total power requirement 2 kW weight of the machine ca. 0,4 t

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Pgsdpeudi Uzefx Ab Sjr Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: excellent (used), Year of construction: 2007, cutting diameter 220 mm total power requirement 0,7 kW Pgedpsyw Ti Tefx Ab Sor weight of the machine ca. 0,240 t

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Machine type: Bandsaw - Semi-automatic Band dimensions: 3055 x 27 x 0.9 mm Cutting capacity (rectangular): 200 x 350 mm Cutting capacity (round): 260 mm Cutting speed: 18 - 87 m/min Main drive motor power: 1.5 kW Weight: approx. 460 kg Dimensions W x D x H: approx. 1700 x 1200 x 1600 mm Standard accessories: Pjdjx Narlspfx Ab Sjgr - Infinitely variable cutting speed via control panel with display - Raise/lower via control panel (hydraulic) - Manual vice with quick clamping, adjustable in length - Material stop - Emergency stop on control panel - Brush for band cleaning - Coolant tank: 17 litres - User manual in English Options: - 2 pcs. 2-meter standard roller conveyors without measuring scale - 1 pc. saw band 3,055 x 27 x 0.9 mm Available end of April 2026

Condition: excellent (used), 1 saw frame in very good condition 710 mm frame width with 8 guide shoes in good condition Pjdelni Uqspfx Ab Sogr

Condition: excellent (used), functionality: fully functional, 2. Technical Data KASTOfunctional U Cutting Capacities: Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 300 x 260 mm Cutting range 90° square: 260 x 260 mm Cutting range +45° round: 200 mm Cutting range +45° flat (W x H): 200 x 240 mm Cutting range +45° square: 200 x 200 mm Cutting range +60° round: 165 mm Cutting range +60° flat (W x H): 160 x 120 mm Cutting range +60° square: 150 x 150 mm Cutting range -45° round: 200 mm Cutting range -45° flat (W x H): 200 x 240 mm Cutting range -45° square: 200 x 200 mm Dimensions and Weights: Length: 1,014 mm Width: 1,826 mm Height, upper part lowered: 1,462 mm Height, upper part in highest position: 1,899 mm Material support height: 950 mm Pjdpsyhzi Sofx Ab Sogr Total weight: 510 kg Performance Specifications: Year of manufacture: 2000 Total connected load: 2 kW Saw drive motor: 1.5 kW Cutting speed: 30-75 m/min, infinitely variable Saw blade dimensions: 2910 x 27 x 0.9 mm Saw blade guides: Carbide, replaceable Material clamping: Mechanical Feed: Hydraulic Saw blade tensioning: Mechanical Coolant system: Coolant supplied via 1 coolant nozzle and 1 coolant hose Coolant tank capacity approx. 45 liters Pump flow rate: 16 l/min 3. Machine Description Semi-automatic bandsaw machine with a very robust design for efficient handling of all cut-off and mitre cutting tasks (-45°/+60°) in tubes, profiles and solid materials in workshop applications. The steplessly adjustable feed ensures sensitive and tool-friendly sawing. Universal bandsaw for workshop use in a very robust design for cutting profiles, pipes and solid materials. Machine Base Heavy-duty, torsion-resistant welded construction. Saw Blade Guide The side guide for the saw blade is via mechanically preloaded blade brushes. The blade back is guided by idler rollers. Saw Blade Tensioning Continuously adjustable by ratchet. Mechanically limited tension force. Main Saw Blade Drive Drive power: 1.5 kW, cutting speed 30-75 m/min Material Clamping – Machine Vise Secure material clamping using manually operated horizontal vise. Mitre angle continuously adjustable from 0° – 45° and 0° to +60° using a scale. Indexing bolts at positions -45°, 0°, 45°, and 60° for additional mitre locking. Feed Control Saw feed is steplessly controlled via fine throttle, suitable for universal use on solid and profile materials. Accessories: Coolant system