Vertical band sawing machine

JAESPA MSU 4

Condition: good (used), Year of construction: 1991, Roller diameter: 420 mm Thrust: 400 mm Table size: 615 x 615 mm Cutting height: 350 mm Saw blade length: 3450-3640 mm Saw blade speed: 15-1500 m/min Machine weight: approx. 700 kg Iaolhcjwgli Rscqret

Condition: good (used), Year of construction: 1981, machine/vehicle number: 12236-81, Offer 24157 Technical data: - Roller diameter 420 mm - projection 400 mm - max. passage height 325 mm - Table size 600 x 600 mm Iaelhccotwbxnsqret - Table can be tilted left / right 10° / 45° - Table height from floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Band width max. 25 mm - infinitely variable band speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - IDEAL saw blade welding unit - lighting

Year of construction: 1977, Condition: good (used), Vertical band saw JAESPA type: MSU-4 year 1977. Machine was modenized electric Infinitely variable speed saw band welding machine. Iolhccjcv N Nheqrsat

Condition: used, Vertical band saw JAESPA type MSU 4 make no. 724749 year of construction approx. 1980 roll diameter 420 mm throat 400 mm table size 610 x 610 mm cutting height 260 mm saw band length min. 3200 - max. 3400 mm saw band speed 10-1500 m/min. infinitely variable mains connection 400 Volt, 50 Hz - infinitely variable saw band speed via 2 gear steps and infinitely variable via belt drive - saw table tiltable - Saw blade butt welding machine IDEAL BS0-16 Ielhccqsd Nbk Torjat - saw blade shear - Grinding stone for grinding the weld seam space requirement L x W x H 1000 x 850 x 1850 mm weight 400 kg good condition

Condition: excellent (used), Vertical band saw JAESPA type MSU 4roller diameter 420 mmoutreach 400 mmtable size 615 x 615 mmcutting height 350 mmsaw blade length min. 3450 - max. 3640 mmsaw blade speed 20-2500 m/min. stepless mains connection 400 volt, 50 Hz - stepless saw band speed over 2 motor speeds, 2 gear stages and stepless belt drive - saw table swivelling - 2 gear stages - saw blade butt welding machine IDEAL BS 0-16- saw blade shear - grinding stone for grinding the weld seam space requirement L x W x H 1100 x 950 x 2000 mmWeight approx. 700 kgsehr good, immediately operational condition2 identical machines in stock Ijlhccod Tx D Ueqrsat

Condition: excellent (used), Year of construction: 1990, 1 used vertical band saw make JAESPA type MSU 4 year of construction approx. 1990 Islhjuiu Azjccqreat roller diameter 420 mm throat 400 mm Table size 610 x 610 mm Cutting height 260 mm Saw blade length min. 3200 - max. 3400 mm Saw blade speed 10-1500 m/min. infinitely variable Mains connection 400 Volt, 50 Hz - Infinitely variable saw blade speed via 2 gear stages and infinitely variable via belt drive - Swivel saw table - Saw blade butt welding machine IDEAL BS0-16 - Saw blade shears - Grinding stone for grinding the weld seam Space requirement L x W x H 1000 x 850 x 1850 mm Weight 400 kg

Condition: used, Technical details: dimensions of saw-band: 3400 mm saw band length: min. 3200 mm saw band width: 20 mm band speed: 6 / 12 / 25 / 75 / 150 m/min cutting speed: 15 - 1500 / steples m/min Table dimensions: 665 x 665 mm table height over floor: 1050 mm table swivelling to both sides: 15° / 30° Grad table feed: Länge: 250 mm total power requirement: 4,0 kW dimension machine xH: 1,2 x 0,9 x 2,2 m Ioljv T Th Nshccqrsat Steel and metal band saw with saw band cutting, welding and grinding device Saw band speed 2 steps, infinitely variable Infinitely variable table feed Tiltable table Machine lighting Stop bar *

Condition: excellent (used), Year of construction: 1990, Machine type: Vertical metal band saw Manufacturer: JAESPA Model: MSU 5 Year of manufacture: 1990 Condition: Very good Type of offer: Used machine Technical specifications: Thrust: 500 mm Drive type: Electric/mechanical Table: 615 x 615 mm Pivoting Cutting area: Cutting height max. 380 mm Drive: 2.2 kW Note: Infinitely variable speed control, butt welding device, stop, machine light Iolhccjvvwwtsqroat Weight: 500 kg The machine is in very good and ready-to-use condition and can be inspected and demonstrated at our premises. We would be pleased if you are interested in our offer. Errors, changes, and prior sale excepted.

Condition: used, Year of construction: 1987, Functionality: fully functional, Vertical Band Saw Manufacturer: JAESPA Type: MS 4 Mach. No.: 787026 Year of manufacture: 1987 Technical specifications: Roll diameter: 420 mm Ielhcev Rfupecqreat Usable throat or cutting width: 405 mm Max. cutting height: 450 mm Table size: 615 x 615 mm Table tilting left/right: 10/15° Table tilting front/back: 15/10° Saw blade width up to: 20 mm Saw blade length: 3200 - 3400 mm Saw blade speed continuously adjustable: 12 - 1500 m/min Drive motor: 380 V, 1.5 kW Equipment: - Ideal butt welding machine type: BS 0-16 - Grinding stone - Work light - Jaespa Compass Dimensions: 800 x 1105 x 1900 mm (L x W x H) Approx. Weight: 380 kg The machine can be demonstrated live on-site. All information is provided without guarantee. Subject to errors and prior sale.

Year of construction: 1990, Condition: ready for operation (used), A Jaespa vertical metal band saw, filing, grinding and polishing machine is available. Roller diameter: 420mm, cutting height: 280mm, cutting width: 405mm, cutting speed: 25m-280m/min, table dimensions X/Y: 600mm/600mm, table inclination left/right: 15°/45°, working height: 955mm, saw blade length range: 3200mm-3400mm, drive power: 1.5kW. Machine dimensions X/Y/Z: approx. 1250mm/1000mm/2050mm, weight: approx. 500kg. Documentation available. On-site inspection is possible. Ijlhccqou Nllporeat

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled Iaslhehq Txhoccqrot (bolted truss) 723 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 02x swivel castors, new 02x brake/steering rollers, new 01x angle set, new for mounting the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 01x Angle set, new Iaelhccjhq Twyeqrjt for fixing the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: Iaelhccqshq Txwerot 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 02x swivel castors, new 02x brake / swivel castors, new 01x angle set, new for mounting the worktop 04x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: Isljhq Tqdohccqreat 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 01x angle set, new for fixing the worktop 04x safety hook, new Material color: compl. galvanized

Condition: used, Year of construction: 2020, Length of sliding table: 3.200 mm Cutting width: 1.320 mm Cutting height max: 202 mm Ioljwcmmpshccqroat Saw blade diameter max: 550 mm Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Main motor power: 15 kW Rotation speed steps: 2 Scoring aggregate: No Controlled axes: Yes Number of controlled axes: 2 Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 1.215 kg Space requirement Length: 7,3 m Space requirement Width: 3,4 m Space requirement Height: 1,7 m

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Islhcjwka N Hocqrsat Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA inlet width 900mm inlet height 300mm shaft width 1030mm shaft diameter 700mm knife length 1030mm number of knives 3pcs sieve dimensions 70x70mm from the bottom 2 toothed pulling shafts lower shaft motor 7.5kW from the top 2 toothed pulling shafts upper shaft motor 7.5kW belt feeder redler with chain belt 5600mm + 10600mm 2.2kW feeder belt width 800mm main motor 90kW reverse gear total dimensions of the machine L/W/H 3300x3100x1700mm dimension of base for chipper 3300x2080x1940mm dimension of feeder/redler length/width/height 5600x900x1000mm + 10600x1050x1600mm dimension of base for feeder belt 5100x1300x2520mm total weight approx. 16000kg ADVANTAGES – German production – chain conveyor type redler, equipped with scrapers – reverse gear – DTR documentation – used chipper, very good condition Iaelhcswi Sm Uscqret Net price: PLN 269900 Net price: EUR 63490 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Iaslhccewiwg Hoqrjt Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Condition: used, Year of construction: 2020, cutting diameter 250 mm saw band length 3100 x 27 x 0,9 mm capacity 90 degrees: square 220 mm capacity 90 degrees: flat 280 x 190 mm band speed 37 / 74 m/min sawing motor 1,5 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,6 x 1,4 x 1,3 m Miter band saw Iolhewkvq Hsccqrsat - Semi-automatic - Double miter - Material detection during lowering

Condition: used, Year of construction: 2020, Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Glue system granulate: glue pot below feeding chain Quick-change glue pot: Yes Suitable for PUR glue: Yes Iaslhccjwi Shxoqrot Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 1 motor Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: right-side machine Conformity marking: CE mark Total connection: 15 kW

Condition: used, Year of construction: 2016, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Iaolhccerdkf Aeqret Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: used, Year of construction: 2010, Working width: 630 mm Working height max: 300 mm Number of knives: 4 Working height min: 3 mm Rotation speed: 4.600 rpm Table length: 1.100 mm Number of feed-out rollers: 1 Main motor power: 11 kW Feedrate max: 20 m/min Iaslhcovvydpecqret Continuously variable feed: Yes Digital readout for thickness: Yes Segmented pressure bar: Yes Electromotoric height adjustment: with digital readout Cutter block: Barke/Brück Outfeed: Steel roller Control: FORMAT 4 POWER-DRIVE Conformity marking: CE mark Space requirement Height: 1,2 m

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Original packaging Equipment and technical data: Circular saw unit swivels 90-45°, Saw blade D=250-450 mm, cutting height max. 155 mm, electric height adjustment Electric angle adjustment with digital display for height and angle Crosscut stop 3200mm swivels 90-45°, 2 stop jaws Machine stand kappa 450, circular saw table made of gray cast iron Operating tools 3 speeds 3500/4500/5500 rpm, 50Hz Iaolhccqjv E Szlsrjt Electric panel saw 3x400V 5.5kW (7.5PS) S6, SD Start, CE with brake Cutting width 1250mm Top guard cutting width 1250 mm, hood for 90° and hood for angle cuts height adjustable and made of can be swung away from the work area. Saw blade diameter 450mm, suction connection D-100 mm Parallel stop with digital display and automatic length compensation when the saw blade is swung, stop ruler length 1200 mm, can be swung away Format sliding table cutting length 2800mm anodized, trimming shoe (W-Alu/An-Gray) 10-year Felder guarantee on „X-Roll“, the Felder format table guide system! Extension 1250x650 mm X-Roll with movable support rail and digital angle display, cutting length 2800/3200 mm Location: Hochheim Availability: Immediately Sale on behalf of the customer

Condition: used, Year of construction: 2015, Working dimension X: 3.740 mm Working dimension Y: 1.570 mm Working dimension Z: 250 mm Independent Z-axes: 2 Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 10 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 34 Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Positioning aid: Yes Laser setup aid: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Bumper Ielhowidzwjccqrsat Control: PC control Conformity marking: CE mark Total connection: 29 kW

Condition: used, Year of construction: 2015, Working dimension X: 3.090 mm Working dimension Y: 1.530 mm Iaolhccowh Rnueqrjt Working dimension Z: 85 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 11 Linear tool changer: Yes Vertical drilling spindles: 8 Gantry machine: beidseitig angetriebene Gantrymaschine Automatic central lubrication: Yes Machine table: Matrix table Tool charge measurement: Yes Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 500 m³/h Safety device: Light barrier Control: PC control Handheld terminal: Yes Software: FORMAT 4 WOOD FLASH Conformity marking: CE mark Total connection: 25 kW