Two-shelf veneer press

JOOS typ HP 100 hydrauliczna

Condition: used, Veneer press JOOS HP 90 -used- Emergency stop bar, control by push button, gold anodized plates ----- Technical data ----- Press area: 2,500 x 1,250 mm, Bcye8Tf7 max. opening height: 400 mm, Number of cylinders:: 4 pieces

Condition: good (used), A Joos HP-90 veneer press is for sale. The machine works perfectly and can be inspected and tested on site. About the machine: Pressing area: 2500mm x 1250mm Year of manufacture 1975 Pressing pressure 30t Connection value 17.5kW Dimensions (L x W x H): 2950mm x 1600mm x 2220 Dqv9Xb Weight approx. 3100kg You will receive an invoice with VAT shown. The price is gross, i.e. €3999.00 net. If you have any questions or are interested, please get in touch! Your JG Holztechnik team from 26188 Edewecht.

Condition: used, Year of construction: 1971, elektrisch beheizt Pressfläche. ca. 1600 x 800 mm Pressdruck: 35 to spez. Druck: 2,74 kg/cm Kolben DM: 80 mm mit Sicherheitsreisleine Anschlußwert : 5.1 kW Maße: 2100 x 1100 x 2250 mm Gewicht. ca. 1650 kg Dq7Ahn Lagerort: Nattheim

Condition: excellent (used), Year of construction: 1981, Veneer press Manufacturer: Joos Type: HP 115 Year of manufacture: 1981 Panel size: 3,000 x 1,350 mm Opening width: 400 mm Pressure: 115 tons Specific pressure: 2.84 kg/cm² Heating: Electric Weight: approx. 5 tons Drcjyd Safety device: Emergency stop step Dimensions: approx. 3,500 x 1,630 x 2,200 mm

Condition: used, Year of construction: 2004, Functionality: fully functional, pressing force: 40 t, opening height: 200 mm, cylinder stroke: 200 mm, table width: 1,300 mm, table length: 1,500 mm, Technical data: Total pressure output 400 kN Total pressing area 1300 x 1500 mm Total pressing table 1300 x 1580 mm Spec. pressure at full design 2.1 daN/cm² (kp/cm²) 4 cylinders 60 mm diameter 200 mm stroke Operating pressure 350 bar Height of the pressing chamber 200 mm Bqpfiz7Otq Loading width 1600 mm Steel plates Roller bars arranged to the right and left of the lower heating plate for moving the press package in and out. Roller bars can be raised and lowered pneumatically by the operator, can only be activated at the bottom dead center of the pressing table. Max. load 500 kg.

Year of construction: 1998, Condition: ready for operation (used), Working surface: 2200x1250mm, pressing force: 65t, connected load: 1.4kW, length: 2540mm, width: 1450mm, height: 1950mm, weight: 2.6t. Zp88C

Condition: good (used), Year of construction: 1989, Maximum pressure : 2500 x 1300 mm Maximum opening : 400 mm 2 x Electric heating plates Number of cylinders : 4 ( Ø 100mm ) 2 hand push buttons. Transport dimensions : L 3000 x W 1800 x H 2100 mm, est weight : 3000 Kg Dq87Pn

Condition: good (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 1855680, pressing force: 80 t, frequency: 50 Hz, power: 4 kW (5.44 HP), table length: 1,400 mm, table width: 800 mm, operating pressure: 270 bar, Manufacturer: Joos Model: HP-S 80 Year of Manufacture: 2004 Pressing Power: 800 kN Bk7Dzswkxya Three-Piston Suitable for woodworking and industrial applications Well-maintained and in good working condition Previously used in a company setting, reliable and durable. Despite wear marks and dust, this Hydraulic Press continues to deliver reliable performance. Contact us today to arrange a viewing or to inquire further information.

Condition: excellent (used), Veneer press Joos Type: HP-90 Panel size: 2550 x 1350 Gold anodized panels Electrically heated 6 press cylinders Huzy9Sw

Condition: used, Year of construction: 1972, used veneer press Joos Model HP 65/1 Ubt0Akz3Gv year of construction 1972 pressing area 2200 x 1100 mm heating plates gold anodized connected load heating approx. 14 kw Opening width 300 mm Pressing pressure max. 65 t. 4 cylinders Weight approx. 2500 kg Dimensions approx. LxWxH 2700x1500x1800 mm

Condition: used, Year of construction: 2004, Functionality: fully functional, pressing force: 40 t, operating temperature: 250 °C, heating capacity: 24 kW (32.63 HP), cylinder stroke: 200 mm, table width: 1,500 mm, table length: 1,300 mm, Technical data: Total pressure output 400 kN Total pressing area 1300 x 1500 mm Total pressing table 1300 x 1580 mm Spec. pressure at full design 2.1 daN/cm² (kp/cm²) 4 cylinders 60 mm diameter 200 mm stroke Operating pressure 350 bar Height of the pressing chamber 200 mm Loading width 1600 mm Steel heating plates Drbk0N Max. operating temperature: 250 °C Roller bars arranged to the right and left of the lower heating plate for moving the press package in and out. Roller bars can be raised and lowered pneumatically by the operator, can only be activated at the bottom dead center of the pressing table. Max. load 500 kg.

Year of construction: 2011, Condition: ready for operation (used), Two heated hydraulic presses are available. 1) Italpresse GL9-6/188, year of manufacture: 2011, press force: 300t, spec. press force: 43kg/cm², cylinder: 6, cylinder diameter: 140mm, table dimensions X/Y: 1400mm/600mm, opening height: 400mm, heating plates: electric, drive power: 5.5kW. 2) Joos HP S80, year of manufacture: 2011, pressing force: 80t, plate dimensions X/Y: 2500mm/1250mm, piston diameter: 80mm, operating pressure: approx. 385bar, spec. pressing force: 2.5daN/cm², cylinders: 4, heating: electric, machine dimensions X/Y/Z: approx. 2900mm/1500mm/2100mm, weight: approx. 3300kg. On-site inspection is possible. Cwsodihftm

Condition: as good as new (ex-display), total pressing surface 2550 x 1350 mm total pressing force 900 KN (=80 MP) specific pressure force 2,6 daN/cm² (kp/cm²) 4 cylinder 80 mm diameter 400 mm stroke operating pressure 355 bar goldclour anodized heating platens, tooth rack guidance Yo9Kdg

Condition: good (used), Technical data for the pallet rack upright: Racking system: Dexion Type: P90 The scope of delivery includes: 01x pallet rack upright, used Material color: sendzimir galvanized Type: 100|30 Profile dimensions: 100 x 100 x 3 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 12,500 mm high 1,100 mm deep Dox0Op Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Here we offer a climatic test chamber. Air cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door disassembled: 1500 x 1940 x 925 mm Cjjscgznvc test chamber: 720 x 690 x 560 mm door, clear width: 720 x 690 mm viewing window, heated: 500 x 600 mm Temperature range +5 to +100 C heating: 4,0 K /min Cooling: 0.6 K /min Climate range +10 to +95 C Humidity range: 10 to 95 % r.H. Humidity difference, temporal: ≤ ± 3.0 Water connection humidifier: city water or distilled water 20l reservoir tank. Mains connection: 400 V 3/N/PE, AC, 50 Hz Power requirement max : 6,3 kW Weight : 500 Kg Type : 3416/16 Refrigerant : R134a For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Feutron Type: 3423/16 Air-cooled climatic test chamber Nominal test chamber volume: 280 liters Dimensions Test chamber exterior: 1500 x 2040 x 1075 mm Fan motor and door removed: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door clear width: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: -40 to +100 C Heating: 3.0 K /min on average Cooling air conditioning mode: 0.6 K /min Temperature mode: 3.0 K /min on average Climate range +10 to +95 C Humidity range: 10 to 95 % r.h. Humidity difference, temporal: ≤ ± 3.0 Entry port 1 piece, side panel left 75 mm ∅ Feed-through opening 1 piece, side wall right 75 mm ∅ Water connection humidifier: city water or distilled water 20 l storage tank Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Dkvy2Rp9P Weight: 550 kg Refrigerant: R134 a / R507 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2010, operating hours: 4,786 h, Condition: excellent (used), Our X-ray inspection system from Dage is for sale. The system is in excellent condition. The system was serviced twice a year by the manufacturer. (Documents available) Type: Dage XD 7600 NT 100 HP including aluminum sample tray. B07Zt7Kh3U X-ray on hours: 4786.4 hours The system has an XPlane function, with which it is possible to create a partial CT. The µCT tray is not required for this partial CT. We used the system for the following applications: • Analysis of electronic components (bonding wires, chip size, lead frame) • Void measurements • Solder penetration measurements • Analysis of circuit boards and assemblies (vias, conductor tracks, hidden solder joints such as QFNs, BGAs, solder joints, press-fit connections, crimp connections, rigid-flex circuit boards, etc.) • Analysis of components and solder joints under potting compound and/or paint • Analysis of aluminum die-cast parts for air inclusions and cracks • CT analysis of components • Analysis of plastic parts for cracks The system is expected to be available from the beginning of May and can be demonstrated until then. Please see the technical data below (documents).

Year of construction: 2019, Condition: refurbished (used), Description Function Advantages Technical data Device for manual cleaning of small parts using the high-pressure spray method. 2120405 The bath in the tank is simply filled with cleaning agent after heating to operating temperature (20 to max. 45°C). filled. By pressing the foot switch, the cleaning fluid flows through the spray gun and the parts soiled with oil and grease can be easily cleaned. Bwr93Gwnw7 parts contaminated with oil and grease can be easily blasted off. ∙∙ Parts cleaning device for manual cleaning of small parts using the high-pressure spray method ∙∙ for use with IBS cleaning agents WAS ∙∙ Quick, thorough cleaning thanks to easy handling and powerful cleaning action ∙∙ with steam outlet ∙∙ for cleaning parts weighing up to 50 kg ∙∙ Compressed air blower ensures a permanently clean viewing window - free from splash water and dirt ∙∙ With spray gun for use in the spraying process External dimensions of appliance: 1140 x 650 x 1845 mm (WxDxH | closed) 1140 x 940 x 2020 mm (WxDxH | open) Work surface: 790 x 590 mm (internal dimensions) Working height: 1215 mm Load capacity: 50 kg Washing temperature: 20 to max. 45°C Operating pressure: max. 60 bar Spray volume: 14 L/min Filling volume: 100 L Heating capacity: 3 kW Connection: 7 kW, 400 V, 50 Hz Air consumption: 470 L/min at 3 bar Accessories Automatic washing machines Parts washers IBS parts washer type WD-100

Condition: excellent (used), IPG Ytterbium Fiber Laser Fiber Laser Here we offer you an IPG Ytterbium Fiber Laser fiber laser. IPG Ytterblum Fiber Laser Fiber Laser 90-240 VAC Type Model Name: YLP-HP-2-1500-50-100 Condition: used / used Bdb8Ylqe Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Nordberg cone crusher Boew8O90Ue Type SX 100 HP

Condition: used, Door lock mortiserused, good conditionmanufactured by Haffnertype SL 100stand machinechain set 12 - 17 / 50 x 150 mmworkpiece resthandle hole motorface-plate motorlubricant unitmechanical workpiece clampingrequired space ca. l x w x h mm1500 x 900 x 2010located in  97447 Gerolzhofensale in current condition as seen- free on truck - Bghggn8Eb8

Condition: new, Year of construction: 2020, A new high-pressure pump from Andritz Ritz GmbH is offered. Dq3W82 Year of manufacture 2020. Technical details: see nameplate.

Condition: excellent (used), Year of construction: 2008, Gardner Denver Rietschle Thomas Uiwcdtateb TYPE VSI 100 - 400V 3KW 0,1mbar 1x BJ 2005 1x BJ 2008 Pumps were dismantled in working order Item location is 75053 Gondelsheim Used condition, see pictures Shipping by forwarding agent or collection by appointment

Condition: good (used), Year of construction: 1994, manufacturer: NORDBERG year of construction: 1996 type: HP 100 e-engine: 90 kW weight: ca. 5.500 kg capacity: ca. 80 to/h - 0/22 with cooling system, control unit and protective box Mipe992G

Condition: excellent (used), Here we offer you a chamber dryer. Outer dimensions approx. width: 1.885 mm depth: 1.200 mm height: 2.425 mm Usable space dimensions approx. width: 1.030 mm depth: 1,000 mm Height: 2,100 mm Usable space: 2.2 m³ Nominal temperature: 100 °C Working temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating capacity: 20 kW Circulating air volume: 4,500 m³/h / 400 Pa Motor power: 1,1 kW Protection class: IP 54 The chamber heating furnace must not be used for flammable or explosive substances. The chamber heating furnace must not be installed in the Ex-area. Paternoster device External dimensions: Pvh8Cq Height: 1,880 mm Width: 809 mm Depth: 950 mm support sets: 13 pieces Pitch: 228 mm Carrying set width: 354 mm Carrying set depth: 320 mm useful height: 135 mm Power of drive motor: 0.25 kW at 189 Nm Transport speed: on average 5 m/min. Payload/carrier set: max. 10 kg total payload: max. 130 kg total weight loaded: max. 730 kg year of construction: 2005 Type: Ke/SO Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.