Shrinking machine

KALLFASS Universa 400

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully automatic flow-pack machine for packaging products – regardless of their length – in a fully enclosed manner and without film overlap. The products are fed via a conveyor belt and simultaneously inserted into a half-tube film using a forming shoulder. Product detection is carried out using a light barrier. The feed belt can be easily adjusted to accommodate different product widths. The longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Worn parts and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing stamp: 450 mm Film: Half-tube film, approx. 12 - 80 µm Hedpfx Acjz A Dfqj Aent Film roll outer diameter: max. 400 mm Film roll width: max. 600 mm Min. product length: 120 mm Min. product width: 80 mm Passage height: 200 mm Working height: 780 - 930 mm Power connection: 400 Volt three-phase, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A Inspection and demonstrations are possible by arrangement in our premises. Functional guarantee, no warranty.

Condition: used, Vollautomatische Seitenschweißmaschine zur Verpackung von Produkten – unabhängig von ihrer Länge – mit Volleinschlag und ohne Folienüberlappung. Mit neuem Querstempel. Fully automatic side sealing machine for packaging products – regardless of their length – with full wrap and without film overlap. With new cross seal bar. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Hnjdpjxcufdjfx Ac Ast On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2000, Vollautomatische Einschweißmaschiene mit Einschweißtunnel - Automatic Foil sealing machine Kallfass Universa 400 NT - Universal 450 NYear 2000 - Serial-No. S 04.00.9 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Hnedpor H N U Hofx Ac Aet Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: not inspected (used), Year of construction: 2003, functionality: limited functionality, total length: 1,950 mm, total height: 1,850 mm, total width: 1,650 mm, type of input current: three-phase, product height (max.): 100 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 450 mm, product width (min.): 20 mm, input voltage: 400 V, input current: 5 A, working height: 800 mm, width of welding knife: 450 mm, passage height: 150 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), Fully Automatic Side Sealing Machine UNIVERSA 400NT Used Machine; Year of Manufacture: 06/2003 Description: Fully automatic L-seal flow packaging machine for packaging products—regardless of their length—with a full wrap and without film overlap. Maximum output is approx. 85 cycles/min. Product feeding is carried out via a conveyor belt, simultaneously wrapping the item in a centre-folded film using a forming shoulder. Product indexing is managed by photoelectric sensors. The feed conveyor can be smoothly adjusted for different product widths. After the product is wrapped in film, the cross sealing is performed by a permanently heated sealing system. Longitudinal sealing is achieved via a continuous side sealing unit. The height of both the forming shoulder and sealing systems can be manually adjusted. The remaining film trim is collected on a film winding device. Suitable for all standard centre-folded films from approx. 12 – 80 µm, e.g. polyethylene (LDPE) and polyolefin films. Comprehensive standard equipment: • Motor-driven film holder, located near the floor for easy loading • Film tear and end-of-film detection • Product indexing selectable via horizontal or vertical photoelectric sensor • Product protection in the sealing area with special safety light barrier Hedey Icr Sepfx Ac Asnt • Conveyor belts at the sealing transition point equipped with knife edges • Infeed conveyor extendable for easy, quick threading of film • Permanently heated sealing bar with exchangeable sealing strip; available in various profiles for optimal seam quality depending on product and film type • Electromechanical sealing bar drive • Continuous side sealing • Motor-driven film transport with automatic film trim winding • Operator guidance and fault diagnosis via multilingual text display (languages: German, English) • Programmable logic controller: SIEMENS S5 • Adjustable working height • Machine built in accordance with EU Machinery Directive 98/37/EC (CE sign), EN/VDE standards, and relevant accident prevention regulations of the Employers’ Liability Insurance Association for Food and Luxury Goods Industry (GS mark) Additional features: • Infinitely variable speed control for both conveyor belts with frequency inverter, adjustment range approx. 10–35 m/min, including soft start • Film shortage monitoring Technical data of the base machine: Cross sealing bar length: 450 mm Minimum product length: 80 mm Film: Centre-folded film, approx. 12–80 µm Film roll support: Near floor level for easy loading Film roll outside diameter: max. 400 mm Film core diameter: approx. 76 mm Film roll width: max. 600 mm Working height: 780–930 mm Conveying speed: Adjustable 10–35 m/min Sealing system: Permanently heated sealing bar with exchangeable sealing strip, completely odourless operation, temperature control and monitoring via PLC PLC: Siemens S5 Sealing bar clearance height: max. 150 mm Power supply: 400 V three-phase, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A Control cabinet position: To the right in working direction Finish: Kallfass anthracite Dimensions: L = 1,975 x W = 1,170 mm x H = 1,400 mm