Kaltenbach cold circular saw KKS

Kaltenbach KKS

Condition: reconditioned (used), Year of construction: 2010, For sale: a Kaltenbach cold-cutting circular saw. Gearbox with no backlash! Type: KKS 400 E Year of manufacture: 2010 Fpsdpozrncuofx Akhsk Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse: 1,550 mm/min Maximum working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Minimum working area: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch Shipping possible upon request. Forklift available for loading.

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW Fodsu Dbvtjpfx Akhepk weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of information to provide, so I have posted several pictures with basic details to give you an overview of the saw's capabilities. It is a rare model with a feeder (single piece) of 0-2000mm, as well as repeat cutting of 2000-9999mm. Automatic zeroing before cutting. CNC saw head with automatic rotation of +/-60 degrees, 2 types of lubrication, emulsion, and direct spray. Option to direct the cut piece to an ejector for small pieces, as well as a chain ejector with a function for lowering longer and heavier pieces. I haven't included this in the pictures as it is not installed, but the saw also comes with a set of protective guards with safety barriers and a large number of spare parts. The complete documentation is original and is linked to the machine's serial number, making installation easy and straightforward. Fpjdpfx Akeyk Inpohsk Problem explanation: the saw is connected to the electrical power supply, and each individual function (and there are many) is fully operational. The problem arises during automatic operation; the most likely cause is the program parameters themselves (it uses the Windows platform). I haven't been able to find a suitable programmer who can learn on my machine. Possible solution: I contacted the saw manufacturer, and they directed me to their authorized service provider, so I have their contact information, which I can provide to the future buyer. The estimated cost of repair in Serbia is between 3000-5000 EUR. If you are closer to Germany or the Czech Republic, this cost will be significantly lower. So, there are two price categories: if you buy the machine in its current condition, the price is as advertised. If I resolve the problem, the price will be considerably higher. The advertised price includes professional dismantling and loading onto a truck (a rather important, and not inexpensive, item). Transportation is at the buyer's expense. I hope I have clarified the current condition of the machine. Due to a change in business activities, the saw is surplus to production. Happy shopping!

Condition: used, Year of construction: 1990, functionality: fully functional, saw blade diameter: 400 mm, total height: 1,960 mm, total width: 1,070 mm, overall weight: 1,350 kg, type of input current: three-phase, saw drive: 5,500 W, opening width: 160 mm, Used Kaltenbach automatic cold circular metal saw, model KKS 401 NA AB. Suitable for sawing profiles, tubes, as well as flat and solid materials made of steel, cast iron, and non-ferrous metals. The machine features an NC-controlled feed axis, a hydraulic saw feed, hydraulic workpiece clamping, a swiveling saw table for miter cuts, and a coolant system. Saw blade diameter is 400 mm as standard, with cutting speed frequency-controlled from 6 to 30 m/min. The machine control and electrical system have been modernized. Fpedpfozmf H Tex Akhok

Condition: new, cutting diameter 280 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm Fpjdpfoivuqtox Akhjk 280 mm 250 mm 350 x 200 mm 240 mm 220 mm 230 x 220 mm 170 mm 150 mm 170 x 100 mm saw tape speed 37 + 74 m/min total power requirement 1,8 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,5 x 1,7 x 2,0 m

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal-cutting circular saw (2021) Manufacturer: Kaltenbach Fpjdpfxjzlx Dio Akhek Type: KKS 450 U Year of manufacture: 2021 Condition: used, very good Scope of supply: - Documentation - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop - 2x saw blades

Condition: reconditioned (used), Year of construction: 1994, For sale: a Kaltenbach cold-cut saw. Gearbox with no play! Fjdozlm R Repfx Akhspk Type: KKS 400 EC E Year of manufacture: 1994 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse: 1,550 mm/min Maximum working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Minimum working area: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch. Shipping possible upon request. Forklift available for loading.

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 95 kg, Equipment: documentation/manual, type plate available, Extraction capacity of filter unit at spigot*: 2200 m³/h (free-eye) Fpodpfoum Uzaox Akhek Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 1623 / W 508 /H 545 Colour: RAL 7035 Weight: 95 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Filter equipment*: - 40 mm aluminium mesh pre-filter (optional/retrofittable: PrePac pre-filter package) - 1 piece electrostatic filter cell - 20 mm knitted aluminium post-filter (optional: 40 mm post-filter range) OPTIONAL: Several pre-filter packages possible The application: Horizontal, electrostatic air cleaner with EC centrifugal fan for separating oil mist, emulsion mist and smoke from the hall air in recirculation mode. Vertical raw air capture via intake manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your advantages of the ELBARON series: - 6 appliance variants available - Directly from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large programme of mounting and connection accessories - Quality made in Germany We have developed the hall extraction system as a cost-effective alternative to expensive centralised extraction systems or complex individual machine extraction systems. This allows you to protect the health of your employees and maintain your factory building without major investment. We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter devices on the market and are in use worldwide.

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Gearbox, of course, backlash-free! Type: KKS 400 H Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Fpodpfszk U Afsx Akhsk Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Forklift available for loading.

Condition: reconditioned (used), Year of construction: 1980, For sale is a Kaltenbach cold circular saw The machine has been technically and optically refurbished Gearbox naturally free of play! Type: KKS 400 H Fsdpszk Uz Iefx Akhopk Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: excellent (used), Year of construction: 2011, Details Manufacturer: Berg & Schmid. Model: GBS250 Super AutoCut. Year of manufacture: 2011. Condition: in excellent working order. Cutting capacity Round materials (90°): Ø 250 mm Square materials (90°): 230 x 230 mm Round materials (45°): ± 210–220 mm Round materials (60°): ± 160–170 mm Saw blade length: ± 3,000 mm Fpsdpfjy U Dykex Akhsk Saw blade width: 27 mm Saw blade thickness: 0.9 mm Mitre angle & position Left mitre angle: 0–60° Right mitre angle: 0–45° Hydraulic saw arm with adjustable cutting pressure Dimensions Length: approx. 1500 mm. Width: approx. 1700 mm. Height: approx. 1800 mm. Weight: approx. 500 kg.

Condition: used, Year of construction: 1991, saw blade diameter 400 mm cutting diameter 130 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 220 x 80 mm feed length 600 mm feed length: multiple 1800 mm cutting speed 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees 60 Fpjdpfx Akjv Hhrvohjk total power requirement 5,5 kW weight of the machine ca. 1,8 t dimensions of machine L x W x H 2,60 x 1,21 x 1,98 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant

Condition: good (used), Year of construction: 1968, Saw blade diameter 370 mm Cutting capacity 45° - 90 round 115 mm flat approx. 215 x 20 mm rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Cutting speed 30, 60, 130 and 260 m/min Motor power approx. 2.6 kW Dimensions L x W x H 1100 x 1050 x 1600 mm Weight 850 kg Accessories / Special features: - Semi-automatic operation - After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released again. Fpjdsrwyfqopfx Akhok - Hydro-pneumatic stepless saw blade feed - Mitre cut on both sides R - L - 0° longitudinal cut possible - Coolant system - 1 saw blade Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1988, machine/vehicle number: 109884, Offer 26167 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90°: - Round 130 mm - Square 120 mm - Rectangular 300 x 40 mm - or 240 x 85 mm - Cutting range at 45°: - Round 130 mm - Square 110 mm - Rectangular 245 x 40 mm - Miter adjustable left and right, each 0 - 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 400 V / 1.2 / 1.8 kW - Feed rate of the saw blade, hydraulically continuously adjustable - Vertical material clamping - Coolant system - Space requirement: approx. W 800 x H 1850 x D 1100 mm - Weight: approx. 850 kg Fodpfx Aszibmbokhspk - Infeed – roller conveyor with storage area: 4000 mm - Outfeed – roller conveyor with measuring stop: 4000 mm