Welding Smoke Suction

KELLER

Condition: used, Year of construction: 2015, A Keller extraction system in need of repair is offered for sale. Extraction capacity: 7500m³/h, negative pressure: 250daPa, extraction ductwork: DN355/DN400, exhaust stack: DN560 including silencer, fan type: MAE , shaft power: 6.89kW, speed: 2915rpm. A service check including inspection of the filter elements and air-flow measurements was carried out in 2024. This revealed increased differential pressure across the filter cartridges, leaks and insufficient air flow. Including wall bracket. Documentation available. An on-site inspection is possible. Tsdez Hn Svepfx Ahmoc

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: TAM-164, compressed air connection: 6 bar, input voltage: 400 V, total width: 1,880 mm, total length: 8,200 mm, total height: 1,950 mm, type of input current: three-phase, input current: 32 A, warranty duration: 3 months, pneumatic connection: 12 bar, power of the servo motor: 14,000 W, Equipment: CE marking, documentation/manual, type plate available, Used automatic KELLER Tampo master pad printing machine, designed for decorating pens and cylindrical parts. The machine enables 3-colour printing. The machine operates in fully automatic mode: the operator loads the parts into the feeder, and after completion of the process, the finished parts are automatically unloaded into a carton. The equipment includes a servo-driven chain conveyor, automatic part loading and unloading modules, a positioning station, an ionizer, three independent pad printing modules with an automatic pad cleaning system, hot-air drying between the individual printing stations, an IR drying tunnel after completion of the printing process, and a vision inspection system for print quality with automatic rejection of defective parts. Adjustable conveyor prisms and pneumatic rotary modules allow the machine settings to be adapted to different part dimensions. The machine is controlled by a Mitsubishi PLC and a 10″ HMI touchscreen, allowing recipes and process parameters to be managed. The machine is also equipped with a remote communication module. The production process starts with the automatic transfer of the part from the feeder onto the conveyor. The ionizer neutralizes electrostatic charges on the surface of the part before printing. The part is then positioned and transferred successively to three pad printing stations. Each station applies one colour, with hot-air drying between the individual printing stages. After completion of the three-colour printing process, the part passes through the IR drying tunnel and is then subjected to automatic vision inspection. Finished parts are automatically unloaded into a carton, while parts with detected defects are diverted to a separate container. Maximum graphic size: 60 × 60 mm Part dimensions: length 60–150 mm, diameter 8–14 mm. Machine output: up to 2400 pcs/h. Electrical power supply: 3 × 400 V, 32 A. Required compressed air pressure: 6–8 bar. Tsdpoz D Ht Tofx Ahmjc The machine is operational and in working condition. A link to a video showing the machine in operation is provided below. Before sale, the machine will undergo servicing, and we provide a 3-month warranty. The machine can be inspected and demonstrated in operation at our premises in Poland (European Union). The standard demonstration includes a presentation of the machine's operation. Upon request, we can perform paid technological tests using the customer's parts. The machine is sold in the condition and configuration shown in the photographs. Upon request, modifications or additional equipment can be provided according to the customer's individual requirements. Standard delivery terms: EXW. We can additionally arrange transport to a location anywhere in the world. Additional equipment: possibility of manufacturing dedicated tooling for a specific part and carrying out technological tests, including selection of printing parameters and consumables. The price is quoted in EUR.

Condition: new, Keller RECO RM-DPC Micro 10000 ATEX Differential Pressure Switch 8000280026 NOS New differential pressure switch / differential pressure controller RM-DPC Micro 10000 ATEX from RECO, listed here as a spare part for Keller Lufttechnik. Operating and installation instructions are available. Manufacturer: RECO Gesellschaft für Industriefilter-Regelung mbH Affiliation: Keller Lufttechnik GmbH + Co. KG Type: RM-DPC Micro 10000 ATEX Article number: 8000280026 Keller PN: 10602307 Device type: Differential pressure switch / differential pressure controller Measuring range: 0–10,000 Pa Analog output: 4–20 mA Supply: 24 V DC or 110/230 V AC Todpfjzxrq Aox Ahmoc ATEX marking: II 3D Ex tc IIIC T85°C Dc Degree of protection according to nameplate: IP6X Ambient temperature: -20 to +60 °C ATEX certificate: BVS 03 ATEX E 144 X Design: Wall mounting Manufacturer's marking: 607334 001 / 2021 Condition: new / unused

Year of construction: 1990, condition: used, LIQUIDATION SALE – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we offer for sale a complete used technological line for the production of ceramic products, consisting mainly of HANDLE and KELLER equipment. Complete production line price: EUR 400.000 net, EXW, negotiable. To facilitate a quick sale, we also offer: • the complete production line, • individual production sections, • individual machines and equipment. Prices for individual machines are available upon request. Reasonable offers will be considered. Preference will be given to buyers able to complete the transaction and collect the equipment quickly. The line consists of the following machines and equipment: Tjdoy Nzpropfx Ahmoc 1. Raw material pre-processing section • HANDLE R469 edge runner, year of manufacture 1955 • AGW 1065/1085 roller crusher, year of manufacture 1963 • WF 1080A roller crusher, year of manufacture 2005 • Belt conveyors – 4 units • Control cabinet 2. Forming section • HANDLE MDVG 920B mixer, year of manufacture 1990 • HANDLE PZG 56A/50 extrusion press, year of manufacture 1990 • KELLER type 4155 cutter, year of manufacture 1990 • Belt conveyors – 4 units • Control cabinet The equipment is characterized by robust construction, durability and straightforward maintenance. The production line was in continuous operation until the end of 2025 and is available for inspection at the plant in Panoszów, Poland. The machines are available immediately. Quick completion of the transaction and prompt collection are preferred. Please specify in your inquiry whether you are interested in the complete line, a production section or a particular machine. Additional technical information, photographs and individual prices are available upon request.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The device comes with a new belt, a spare belt, and additional brushes. It includes a complete set of BOECK brushes with sandpaper, as well as extra wire brushes for removing oxides, as shown in the photo. The set also features a complete extraction system with industrial filters (filter ventilation unit) from Keller. Tedex Ht Rvjpfx Ahmoc

Condition: used, TECHNICAL DETAILS - Flow : 765 [m3/h] - Output : ø 150 [mm] Floor space - Dimensions (length-depth-height) : 500 x 500 x 1800 [mm] - Weight : 85 [Kg] - Support : 500 x 450 x 770 [mm] Power supply - Voltage : 400 [V] Tjdpfx Asuhb Ibjhmjc - Nominal current : 0.1 [A]

Condition: used, TECHNICAL DETAILS Tsdouhb Egepfx Ahmsc - Speed : 2800 [Rpm]

Condition: used, TECHNICAL DETAILS POWER SUPPLY - Supply voltage : 400 [V] Todpfsw H Dvcox Ahmoc - Frequency : 50 Hz - Power : 2.2 [kW] - Rated current : 4.9 A

Year of construction: 1987, condition: good (used), Keller Lufttechnik MKR 063-55 fan  Air flow rate: 37,000 Nm³/h Total pressure difference 3400 Nm³/h Tedpeh Dpxaefx Ahmsc Spec. gas weight at 20 degrees: 1.2 kg/m³ Motor power: 55 kW Fan speed 1475 /min  year of construction: 1987 Item condition: used Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Automatic dosing device for coating the filter plates with dry additive or for applying a filter aid layer. Tsdpowvh A Ejfx Ahmoc