KERN KER60120-KT500 OPFKERN
KER60120-KT500 OPF
Machine data
- Machine type:
- KERN KER60120-KT500 OPF
- Manufacturer:
- KERN
- Model:
- KER60120-KT500 OPF
- Year of construction:
- 2022
- Condition:
- ready for operation (used)
- Operating hours:
- 3,550 h
Price & Location
- Location:
- , Austria
Technical details
- Laser power:
- 500 W
- Table length:
- 3,048 mm
- Table width:
- 1,524 mm
- Travel distance X-axis:
- 1,524 mm
- Travel distance Z-axis:
- 3,048 mm
- Overall weight:
- 2,495 kg
- Total width:
- 2,083 mm
- Total height:
- 1,346 mm
- Product length (max.):
- 3,988 mm
- Table load:
- 1,000 kg
- Number of axes:
- 3
Details about the offer
- Listing ID:
- A220-69303
- Reference number:
- AT-CUT-KER-2022-00001
- Update:
- 12.06.2026
Description
Machine – JustLaser 15.30L-C500-MC
• Machine Type: CO₂ Laser Cutting and Engraving System
• Configuration: Open Flatbed Gantry Laser System
• Maximum Workpiece Height: 50 mm
• Maximum Engraving Speed: 3.8 m/s
• Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s
• Maximum Engraving Speed (Z12 Option): 1.5 m/s
• Maximum Cutting Speed: 0.5 m/s
• Motors: Brushless DC Servo Motors
• Encoder System: Incremental Measurement System
• Optics: Air-purged telescope, lenses and mirrors
• Standard Lens: 2.5"
• Optional Lens: 5.0"
• Software: KCAM Laser Software
• Interface: G-Code, HPGL, AD-Logic System
• Control Board: KLCM Controlboard
• Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included
• Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz
• Table Exhaust Requirement: 3000 m³/h
• Axis Exhaust Requirement: 1500 m³/h
• Maximum Air Pressure: 10 bar
• Maximum Inlet Pressure: 12 bar
• Maximum Air Flow: 240 l/min
• Connection Size: 6 mm
• Noise Level: 55 dB
• Certification: CE
• Operating Temperature: +15 °C to +25 °C
• Humidity: 40–70 % Non-Condensing
• Environment: Dust-Free
• Active Laser Protection Shield
• Pressure Sensors
• Light Curtain
• Interlock Safety System
• Metal Cutting Option Included
• Capacitive Height Follower
• Metal Cutting Table
• Copper Nozzle
• 2.5" Lens Set
• k-vision Print & Cut Camera System
• JustAIR High Performance Turbines (2 × 1500 m³/h)
Laser Source – Kern Laser Systems
• Model: KER50120-4K500 OPP
• Laser Type: Sealed-off CO₂ Laser
• Laser Power: 500 W (0.5 kW)
• Laser Wavelength: 10.6 µm
• Supply Voltage: 380–415 VAC
• Phase: 3 Phase (4 Wire + Ground)
• Frequency: 50/60 Hz
• Maximum Fuse Size: 40 A
• Full Load Current: 32.3 A
• Disconnect Rating: 40 A
• Short Circuit Current Rating: 5000 A
• Interrupt Capacity: 35000 A
• Largest Amp Load: 16 A
• Laser Class: Class 4
• Country of Manufacture: USA
Bsdpjzbub Dofx Ambodd
Chiller – SMC HRS090-AF-40
• Cooling Type: Water Cooling
• Cooling Capacity: 5 kW
• Refrigerant: R410A
• Refrigerant Charge: 1.5 kg
• Weight: 136 kg
• Power Supply: 3~ 380–415 V, 50/60 Hz
Seller
Registered since: 2017
1,384 listings online
Send inquiry
Telephone & Fax
Mönchengladbach OMAXMAXIEM 2040 3D
Tarnów Grodkowski MARTEX CNCMTX 1530
Used-Machines Trust Seal
What is the trust seal?
Used-Machines certifies selected sellers with the Used-Machines trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Used-Machines staff.
What do we verify?
Check of
trade licence or commercial register extract
Verification of the dealer's
postal address
Validation of the
banking details
Verification of
accessibility to
main phone number
Credit report
may not contain negative criteria
Buyer complaints
can lead to withdrawal of the sealWhat does this mean for you as buyer?
The Used-Machines trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.
Disagreements may of course still arise during the purchasing process. Used-Machines is not liable for any legal violations by buyers or sellers active on Used-Machines.