WasherKitzinger
Spiracon 100
Washer
Kitzinger
Spiracon 100
Year of construction
2024
Condition
New
(fully functional)
Location
Neuenkirchen 

Machine data
- Machine type:
- Washer
- Manufacturer:
- Kitzinger
- Model:
- Spiracon 100
- Year of construction:
- 2024
- Condition:
- new
- Functionality:
- fully functional
Price & Location
- Location:
- Neuenkirchen, Germany

Technical details
- Total length:
- 2,900 mm
- Total width:
- 620 mm
- Total height:
- 1,500 mm
Details about the offer
- Listing ID:
- A220-44208
- Update:
- 02.06.2026
Description
for approx. 100 E2 crates/hour
incl. crate turner (single-person operation)
System layout:
1. Zone – Main washing zone:
– with a centrifugal pump with 2.2 kW
(900 l/min at approx. 1 bar) distributed over a total of
50 stainless steel nozzles, which enable
thorough cleaning of all 4 sides.
A plate filter continuously cleans the washing solution
and filters it continuously.
– Tank volume 180 l
– Washing temperature in the main washing zone 50-55°C
The crate transport takes place via a spiral
(KITZINGER utility model), which ensures
precise crate separation and an unobstructed
impact of the washing solution for comprehensive
cleaning of all sides.
2. Zone – Rinsing area:
– The products cleaned in the machine are thoroughly
rinsed from all sides with fresh water.
The fresh water must be at least 45°C when fed to the
machine and is heated to approx. 80°C in the system.
Approximately 250-300 l are required per hour.
Technical data:
– Overall length of the base machine: 2000 mm
– with crate turner: 2500 mm
– with crate turner and discharge table: 2900 mm
– Machine width: 620 mm
Ljdpfx Acjza Dvusfjaf
– Machine height: 1500 mm
– Washing tunnel passage width: up to 430 mm (adjustable)
– Washing tunnel passage height: 330 mm
– Total heating power: boiler 1 x 10 kW
– Pump power: 2.2 kW, 900 l/min at 1 bar
– The housing is completely welded and consists
entirely of stainless steel. The substructure is largely made
of 3 mm sheet metal and is therefore very durable.
The machine has the following connections:
– Fresh water at least 45°C, 3/4″,
– Flow pressure at least 1, max. 6 bar via hose connection,
– Consumption approx. 300 l/h,
IMPORTANT: the machine requires warm fresh water,
connection 1/2″ or 3/4″
– Electricity 14 kW, 400 V, 50 Hz, 32A fuse
– Wastewater DN 40 to floor drain or channel
near the machine, below the machine tank with
standpipe
– with main switch
– powerful centrifugal pump
– system on stainless steel rollers
– sloping discharge side for returning water to the
bottom of the crates
The listing was translated automatically. Translation errors are possible.
incl. crate turner (single-person operation)
System layout:
1. Zone – Main washing zone:
– with a centrifugal pump with 2.2 kW
(900 l/min at approx. 1 bar) distributed over a total of
50 stainless steel nozzles, which enable
thorough cleaning of all 4 sides.
A plate filter continuously cleans the washing solution
and filters it continuously.
– Tank volume 180 l
– Washing temperature in the main washing zone 50-55°C
The crate transport takes place via a spiral
(KITZINGER utility model), which ensures
precise crate separation and an unobstructed
impact of the washing solution for comprehensive
cleaning of all sides.
2. Zone – Rinsing area:
– The products cleaned in the machine are thoroughly
rinsed from all sides with fresh water.
The fresh water must be at least 45°C when fed to the
machine and is heated to approx. 80°C in the system.
Approximately 250-300 l are required per hour.
Technical data:
– Overall length of the base machine: 2000 mm
– with crate turner: 2500 mm
– with crate turner and discharge table: 2900 mm
– Machine width: 620 mm
Ljdpfx Acjza Dvusfjaf
– Machine height: 1500 mm
– Washing tunnel passage width: up to 430 mm (adjustable)
– Washing tunnel passage height: 330 mm
– Total heating power: boiler 1 x 10 kW
– Pump power: 2.2 kW, 900 l/min at 1 bar
– The housing is completely welded and consists
entirely of stainless steel. The substructure is largely made
of 3 mm sheet metal and is therefore very durable.
The machine has the following connections:
– Fresh water at least 45°C, 3/4″,
– Flow pressure at least 1, max. 6 bar via hose connection,
– Consumption approx. 300 l/h,
IMPORTANT: the machine requires warm fresh water,
connection 1/2″ or 3/4″
– Electricity 14 kW, 400 V, 50 Hz, 32A fuse
– Wastewater DN 40 to floor drain or channel
near the machine, below the machine tank with
standpipe
– with main switch
– powerful centrifugal pump
– system on stainless steel rollers
– sloping discharge side for returning water to the
bottom of the crates
The listing was translated automatically. Translation errors are possible.
Send inquiry
Your listing has been deleted successfully
An error has occurred






