Crane system - 12t

Konecranes

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 7,325 h, load capacity: 15,000 kg, lifting height: 3,530 mm, fuel type: diesel, mast type: simplex, construction height: 3,450 mm, fork carriage width: 2,540 mm, fork length: 2,200 mm, empty load weight: 23,300 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,540 mm, Diesel Forklift Load Center: 1200 mm Njdoz Ewatspfx Agrjdb Fork Width: 350 mm Fork Thickness: 70 mm Mast Type: Standard Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Pneumatic Front Tyres Size: 12.00-20 Rear Tyres Type: Pneumatic Rear Tyres Size: 12.00-20 Description: In addition to this Konecranes model, we also stock approximately 200 heavy-duty forklifts, compact forklifts, counterbalance trucks & sideloaders at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase & financing on favourable terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this SMV15-1200C. P.S.: Our master forklift workshop specialises in repair, refurbishment, overhaul and custom builds for forklifts from 8 tonnes upwards. We are also happy to sell your vehicle on consignment at our premises. Sideshift, fork positioner Fork positioner opening range 810 / 2500 mm Heater, full cab,

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 17,592 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 32,700 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,050 mm, Diesel Forklift Load Centre: 1200 Fork Width: 200 mm Fork Thickness: 110 mm Mast Type: Standard Transmission: NEW Condition: Ready for use and fully functional Technical Condition: Very good Front Tyres Type: Pneumatic Front Tyres Size: 14.00-24 Rear Tyres Type: Pneumatic Rear Tyres Size: 14.00-24 Description: In addition to this Konecranes model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Leasing & financing at attractive rates are always available. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide detailed advice on this SMV20-1200B. P.S.: Our forklift master workshop specialises in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Ndjdpoz Ev Nysfx Agrsb Sideshift, fork positioner, Heater, full cab, air conditioning, NEW ENGINE AND TRANSMISSION

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Coulmn-mounted slewing crane | Brand: Konecranes | Type: M50-7,0 Year of manufacture: 04/2007 The crane can be inspected at the factory by prior appointment. Condition: Barely used (used for 1–2 years solely for light assembly work). Before disassembly, an acceptance inspection will, of course, be carried out / an inspection report drawn up. TECHNICAL SPECIFICATIONS: - Capacitiy: 5 tons - Jib length: 7.000 mm - Height: 7.360 mm - Swivel range: limited - Permissible weight of hoist (with counterweight): 0,6 tons - Max. hoisting speed: 16 m/min - Foundation with anchor bolts - Operation voltage: 400 V, 50 Hz - Control voltage: 48 V - Electronic carriage Nedpfoz Ertusx Agrodb - Documentation - CE marking No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, total height: 2,353 mm, total length: 34,520 mm, total width: 5,380 mm, load capacity: 25,000 kg, main lifting speed: 4,000 mm/min, fine lifting speed: 670 mm/s, working height: 11,710 mm, Equipment: documentation/manual, 2 units of double-girder bridge crane with 2 wire rope hoists, 12.5T each. Nsdpfx Agez Eghgjrodb The two crane systems can be operated in tandem. Remote controls and spare control units are included in the sale. The crane systems have been maintained annually, and their condition is very good. The crane systems will be dismantled by the seller. Transportation is the responsibility of the buyer.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, total length: 14,000 mm, load capacity: 3,200 kg, Equipment: documentation/manual, Top-quality, rarely used KONECRANES CXTS 3.2T lifting system (in operation since 10/2023) in like-new condition. This offer includes the self-supporting steel structure (crane runway) for both longitudinal and transverse movement. The crane can be installed as a stand-alone unit in a space without the need to build a separate crane runway. Key parameters and condition: * Load capacity: 3,200 kg * Bridge span: approx. 14 m * Complete set: bridge crane, robust self-supporting structure, power supply, remote control, and complete technical documentation * Year of manufacture: 2023 Ndodpfx Aoz Eb Emogreb * Commissioning date: 10/2023 * Condition: rarely used, only light operation in a stone warehouse * Last complete inspection and load test: September 3, 2025

Condition: like new (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, working height: 6,000 mm, Equipment: documentation/manual, --- PLEASE SEND US YOUR PRICE OFFER --- 2x Konecranes CXT traversing unit for bridge crane, each with a 2.0t wire rope hoist, tandem set including radio control and control cabinet (year of manufacture 2018) Original new price at the time: approx. 40,000 Euro/NET For sale is a high-quality, complete tandem electric wire rope hoist set from the premium manufacturer Konecranes, model CXT30410020A35FALOS (ALMOST NEW). The system was used in an industrial setting and was professionally dismantled in the summer of 2022 as part of the closure of the Ettlinger weaving mill (as can be seen in the documentation). Since, according to the available factory certificate, the wire rope was renewed shortly before the dismantling on June 22, 2022, the installed ropes are practically new. All documents, inspection certificates and wiring diagrams are available in the original Konecranes folder. Technical data (per wire rope hoist/traversing unit): Manufacturer: Konecranes Model: CXT30410020A35FALOS Year of manufacture: 01/2018 Load capacity: 2,000 kg (2.0 tons) Lifting height: 6.0 m Duty cycle: M5 (FEM 2m) – very robust industrial design Lifting speed: 4.80 / 0.58 m/min (main and fine lift) Traversing unit speed: 20.0 m/min Operating voltage: 400 V / 3~ / 50 Hz (control voltage 48 V) Lifting motor: 2.25 kW (S3-60% ED) Protection class: IP55 Extensive accessories & equipment: HBC-radiomatic radio remote control: Yellow hand transmitter with selector switch for tandem operation (crane I / I+II / II) including HBC receiver. Batteries are fully charged. SICK reflective light barrier (WL280-2R4331): Integrated collision protection for the safe parallel operation of both traversing units. Complete electrical system: Including central crane control cabinet (Siemens components) and AKAPP slip ring cable connections. Like-new load cables: Renewed on June 22, 2022 (as can be seen in the documentation) and hardly used due to subsequent shutdown. Complete documentation: Original folder with inspection certificate, operating manual for lifting mechanism/travel drive/radio, spare parts catalog, wiring diagrams and software CD. Njdpfxjz D I Hhe Agrodb Special features & highlights: Tandem operation (HBC radio): Control of traversing unit I, traversing unit II or both synchronously via the transmitter switch – ideal for long loads without skewing. Collision protection: SICK reflective light barriers prevent unwanted collision. Fine lift & soft start: 2-stage lifting motor (4.8 / 0.58 m/min) for millimeter-precise positioning. Minimal hook drift: Thanks to a special drum geometry, the hook travels almost exactly vertically – with almost no lateral displacement during lifting/lowering. Long service life: CXT design for maximum hook height; industrial class FEM 2m / ISO M5 for heavy continuous use. Safety: Integrated overload protection and automatic disc brake (fail-safe). Including original Konecranes weather & impact protection: The scope of delivery includes the massive, multi-edged Konecranes protective plates (protective roofs). This optional extra, which is subject to a surcharge, optimally protects the traversing units and the sensors in demanding hall environments. Condition & safety note: The equipment operated perfectly until the professional dismantling in the summer of 2022 and is securely lashed to pallets for transport. The last DGUV 52/54 inspection expired in 2023. Acceptance before recommissioning is the responsibility of the buyer. Collection &

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, total length: 23,100 mm, load capacity: 5,000 kg, working height: 6,700 mm, lifting height: 6,700 mm, Equipment: documentation/manual, Konecranes Overhead Crane – Type: single-girder – Capacity: 5,000 kg – Lifting height: 6.71 m – Year of manufacture: 2002 – Hoist type: wire rope hoist – FEM/ISO hoist classification: M5/2m Dimensions – Span: 23,100 mm (center-to-center) – Installation height: 1,192 mm – Width of wheel set, including bumpers: 3,980 mm Ndjdpfez Ap Aqox Agrsb – Wheelbase: 3,500 mm – Dead weight: 5,260 kg – Suitable for crane rail: 50×30 mm Speeds – Hoisting: 5/0.83 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: up to 32 m/min (variable speed) Features – Control: wired control panel – Crane manual included: yes – Condition: in working order, very good condition – Disassembled: no, as of mid-October 2026

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, Currently, no forks are installed. However, the manufacturer could install forks and shorten the mast before the sale, if desired. This forklift is a returned leased unit. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller assumes no liability for this. The operating hours reflect the status as of April 2025. Additional hours have been added since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm Turning radius (outside): 6,000 mm Overall height: 10,490–19,710 mm Side shifters Side shift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Power: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN-Bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rearview mirrors (mounted high) Variable displacement pumps with return filter (10 µm) Joystick control with power steering Accumulator for lifting mast (60 bar / 2 liters) LED lighting (position, turn, work, and tail lights) Ndjdpfxeyly Dxj Agrsb Cabin (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 windshield wipers, ventilation, opening side windows Electrical 24V connection (10A), interior rearview mirror, coat hook Duplex mast 6/7: Lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side double spreader 20–40", with hooks and side shifters Central lubrication system "Lincoln" Rear-view camera (MOTEC, color display 6.7", heated lens) Fire extinguisher (6 kg, mounted on the outside left) Tires: Type: 14.00 x 24" / PR24, manufacturer: Michelin XZM Operating manual, driver's manual, parts catalog

Condition: used, Year of construction: 2017, operating hours: 19,477 h, lifting height: 14,900 mm, motor manufacturer: Volvo-Diesel, Lifting capacity: 45.000 kg Ndjdsydm N Espfx Agrjb Please contact Sales Team for more information

Condition: used, Year of construction: 2020, operating hours: 2,593 h, lifting height: 11,500 mm, motor manufacturer: Volvo-Diesel, Lifting capacity: 100.000 kg Please contact Sales Team for more information Ndsdpfxoydm Alo Agreb