Folding machine

KRAMER AM-aut II 2000/2,25

Condition: ready for operation (used), max. working width: 2040 mm for metal sheets up to: 2 mm opening width top clamping bar: 90 mm adjustment bending cheek: 90 mm clamping bar drive: 1,5 kW below cheek drive: 4 kW Ieled Rbz Tjhccqpjau electrical connection: 380 V kW weight: 2600 kg space needed: 3050 x 800 x 1350 mm

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Iajlhccqovaatfepou Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 1991, degree of automation: semi-automatic, actuation type: electric, working width: 3,000 mm, upper beam stroke: 280 mm, bending angle: 165 °, sheet thickness steel (max.): 2 mm, back gauge: 1,150 mm, overall weight: 3,900 kg, total length: 4,300 mm, total width: 2,400 mm, total height: 1,700 mm, type of input current: three-phase, Equipment: emergency stop, foot remote control, We are selling our folding bending machine Kramer AMaut III 3000/2 due to a new purchase. The machine has a motorized back gauge from 10 mm to 1150 mm. The top beam can be equipped with different bending bars, including a 135° gooseneck bar with 150 mm free edge, a flat 135° bar, and a 165° bar. Further details can be requested. The bending machine is available immediately. The bending machine can be tested on site with us. The machine is sold excluding any warranty or guarantee. A return is not possible. 'Sold as seen' applies. Iaslewr D Ivjhccqpju Transport must be organized by the buyer.

Condition: used, Year of construction: 1988, machine/vehicle number: 46922, sheet width:2.050 mm plate thickness:1,5 mm distance between columns:2100 mm column arm:100 mm table width:300 mm number of strokes - loaded:50 total power requirement:4,0 KW weight of the machine ca.:1,85 t Iaolhcocxxraecqpou

Condition: excellent (used), Year of construction: 1985, Cutting length 1030 mm Max. sheet thickness 2 mm Stroke rate approx. 67 / min Back stop 500 mm Table width 230 mm Working height 905 mm, can be lowered to 755 mm Motor power 3 kW Machine dimensions L x W x H 1550 x 1300 (without support arms) x 1250 mm Weight 850 kg Accessories / Special features: • Rear, manually adjustable rack and pinion stop with measuring tape, length 500 mm • Front safety cord, electrically secured • 1 side stop on the right • 1 support arm • Geared brake motor Ijlhsfpa Ihoccqpeau • The working height is currently 905 mm. This can be lowered by 150 mm to 755 mm, as the machine's feet have been raised. • Manual central oil lubrication • Electric foot switch We have rotated the two knives to a new cutting edge and readjusted them. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1985, Condition: good (used), machine/vehicle number: xxxx, Technical data: Iaslhccqef S Tg Tepju - Bending operation and rolling operation by hand, - max. working width 1020 mm - max. material thickness St 40 1,25 mm - bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 85 mm - max. adjustability bending beam 20 mm - shaft diameter 55 mm - upper shaft swivels out - rear shaft parallel + inclined adjustable - space requirement approx. W 1500 x H 1400 x D 750 mm - weight approx. 400 kg

Year of construction: 1994, Condition: ready for operation (used), There are two identical bending machines available, working width: 2000mm. Islhccqohw E Ehjpoau

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 Iajlhccsfnabyoqpeu No. 48 287 Year of construction 1990 effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via angle preselection disk - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale - Continuous fence rail - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 tons good condition