Bottle filler/capper/labeller

Krones

Condition: used, Year of construction: 2007, Overview This Krones Variojet is a rotary rinser for glass bottles, built in 2007 and still running in production at a large brewery. The bottles are held in grippers on the carousel and pass three treatment stages before filling: rinsing with water, blowing out with air and gravity drainage. The machine runs at up to 48,000 bottles per hour; this output was achieved in production on the 330, 400 and 500 ml formats, while on the larger formats the filler set the line speed. It has been run on 330, 400, 500, 580 and 650 ml glass bottles, and the change parts for these formats are included. The rinser is fully enclosed by transparent safety doors and is operated from a Krones iPanel. The universal format parts visible in the video are not included in the offer. Technical data - Manufacturer: Krones - Model: Variojet - Year of manufacture: 2007 - Machine type: rotary rinser for glass bottles - Output: up to 48,000 bottles per hour - Bottle formats: 330, 400, 500, 580 and 650 ml glass - Rinsing positions: 110 - Treatment stages: water rinsing, air blowing, gravity drainage - Control: Siemens S7-300 PLC, Krones iPanel (B&R) with zenon V6.20 - Electrical supply: 400/230 V, 50 Hz, 3/N/PE, full-load current 18 A - Operating hours: 44,485 h - Dimensions: approx. 4.5 m across the carousel including the safety guarding Equipment Predpez Hai Tsfx Amxjb - Rinser with carousel, bottle grippers and transparent safety doors - Front table with infeed screw and starwheels - Control panel with Krones iPanel - Water and air supply manifold - Domnick Hunter compressed-air dryer - Change parts for 330, 400, 500, 580 and 650 ml bottles - Water drip trays Condition Used, in good condition with no known defects. The machine is still installed and in production and can be inspected in operation by arrangement. Maintenance: the drive train is overhauled every two years (last in 2025), the rinsing nozzle system every two years (last in January 2026) and the water and air distributor every two years (last in 2024); suspension and format components are inspected monthly and repaired as needed. Availability Available from late February / March 2027, after removal from the production line. Location: Poland.

Condition: used, Year of construction: 2004, machine/vehicle number: LC637, Used Sidel-Krones PET bottling line 18000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for PET bottle handling and optimized for still water applications. Built with premium components from Sidel, Krones, AROL, SMI, Twinpack, ACMI, TOSA, ., and Videojet, it delivers consistent performance at industrial scale. The line operates at a production capacity of 18,000 bph and is configured for the most common market formats.Production speed: 18,000 bph 2L, 23.000 BPH 0,5L Container types: PET bottlesBottle formats: Compatible with 0.5L and 2.0L bottle formatsPrimary components: Sidel SBO 16 Series 2 blow molder (16 molds), Sidel ALSIM gravity filler (63 valves), AROL capping system (pre-threaded plastic caps), Krones CONTIROLL roll-fed labeler (1 station, 16 bottle plates), SMI SK452 F shrink wrapper, Twinpack MHTE handle applicator, ACMI PASAR P130 2L layer palletizer, TOSA 125 + 475 ring pallet wrapper, . R 13/2 preform tipper, Videojet 3210 laser coderAir recovery: Integrated with blow molderChiller: Not includedTooling: Blow molds not includedBuild years (components): 2000–2024Advanced Automation & Control SystemsThe line integrates modern automation features across critical stations to ensure stable performance and high-quality output in beverage production. The Krones CONTIROLL labeler features electric head adjustment for precise label placement, while the capping system by AROL uses a pick & place distribution to ensure reliable application of pre-threaded plastic caps. The Sidel ALSIM filler operates within a pressurized cabin equipped with filters to support hygienic filling conditions.The Sidel blow molder includes an air recovery system to optimize compressed air utilization. Operator interfaces across the equipment provide intuitive adjustment and monitoring, supporting quick startups, changeovers, and routine operations in high-throughput environments typical of industrial packaging.Production Line Integration CapabilitiesThis second hand used bottling line is designed for seamless integration from preform handling to end-of-line palletizing. The . preform tipper, hopper, elevator, and preform infeed supply the Sidel SBO 16 Series 2 rotary blow molder. Downstream, the gravity filler and AROL capping machine form a robust monobloc for consistent filling and closure application. The Krones CONTIROLL labeler applies plastic wrap-around labels via a roll-fed station, supported by a Videojet 3210 laser coder for high-contrast coding. Secondary and end-of-line packaging are handled by the SMI shrink wrapper, Twinpack handle applicator, ACMI layer palletizer, and TOSA ring wrapper.Inline configuration from preform tipping through palletizingFormat change capabilities for 0.5L and 2.0L PET bottlesSuitable for water production with PET containersMachine Condition & Maintenance HistoryThis used bottling line is presented in working condition with components manufactured between 2000 and 2024, including a recent 2024 Videojet coder for coding in... Podsz E Dk Espfx Amxjrb

Condition: used, Year of construction: 2001, machine/vehicle number: LC651, Used KRONES filling line for Vodka - glass 6000 BPH - Year 2001Technical Specifications & Performance DataThis complete glass bottling line, engineered around Krones equipment, is optimized for still strong spirits in non-returnable glass bottles. Configured with a dedicated rinser, a vacuum filling monoblock, a dual-carousel cold-glue labeling and tax-stamp system, and tray-plus-film secondary packaging, it delivers consistent performance for premium spirits presentation.Year: 2001Nominal speed: 6,000 bph on 0.7L formatContainers: Non-returnable Glass bottles; shapes handled: round, flask, shtoffFormats supported: 0.2L, 0.25L, 0.37L, 0.375L, 0.5L, 0.7L, 0.75LRinser: Krones Varioject 1440-24-188; rotary, 24 nozzles; single-channel; fixed nozzles; pre-treated water; gravity draining; no air blowFiller-Capper: Krones Vacufill 960-024-124-V; vacuum filling for still spirits; 24 filling valves; capper with 4 headsClosures: ROPP aluminum and Guala non-refillableLabeler: Krones Prontomatic / Taxomat 720-9-3-180 TA; cold glue; pre-cut paper labels; U-shape tax stamp 160 x 20 mmPacker: MEYPACK VP410; tray + filmConveyors: Krones Synco S bottle conveyors; Krones pack conveyorsControls: Siemens S7 PLC; electrical cabinets includedAdvanced Automation & Control SystemsThe line integrates centralized automation using a Siemens S7 PLC for reliable sequencing of rinsing, vacuum filling, labeling, and packaging. Electrical cabinets are included, supporting line interlocks, safety circuits, and device control. The rotary platforms and mechanical cam systems in the labeling/tax-stamping station ensure repeatable precision at rated speeds, while format-specific change parts support quick, accurate format transitions.PLC/HMI: Siemens S7 PLCControl architecture: Centralized line control with machine-to-machine interlocksSafety: Emergency-stop circuits and guarding typical of Krones rotary equipmentChangeover: Format parts for multiple glass shapes and volumesProduction Line Integration CapabilitiesDesigned for cohesive in-line operation, this used bottling line connects rinsing, vacuum filling, cold-glue labeling with tax stamping, and tray-plus-film packaging via Krones conveyor systems. It is ideal for second hand industrial packaging upgrades in beverage production focused on spirits in glass bottles. The broad format coverage supports brand portfolios requiring flask and shtoff bottles across multiple sizes.Machine typeManufacturer / ModelYearVarious EquipmentKrones Synco S (Conveyors) Psdpfsz E Di Ujx Amxsrb

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: K787016, overall weight: 41,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 800 A, operating pressure: 40 bar, control voltage: 24 V, type of input current: three-phase, Equipment: documentation/manual, Krones Contiform S20 PET stretch blow molding machine – 20 cavities, output up to 40,000 units per hour. Used Krones Contiform S20 machine for manufacturing PET bottles. The machine is completely disassembled and prepared for loading onto a truck. Due to its disassembled condition, it is not possible to perform a test run or functional tests – it is sold as a complete set of components for reassembly by the buyer. Technical specifications: • Manufacturer: Krones • Model / Year: Contiform S20 / [2003] • Number of cavities: 20 • Nominal output (according to the manufacturer's specifications): up to 40,000 bottles/hour • Maximum container volume: up to 3 l (depending on the shape) • Oven: linear, with a 40 mm stroke • Neck size: 26/22 (PCO 1881) Prjdpfxsz Euube Amxeb Scope of supply: [preform feeder, hopper/elevator and orienting device, chiller, molds, spare parts, etc.] Inspection possible by prior arrangement – the machine can be inspected in its disassembled state, with the components laid out in Kutno. Loading at the buyer's expense. Transport to be agreed. Price on request.

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Prodpfsvddkvex Amxeb Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Very good condition

Condition: used, Year of construction: 2019, Overview This Krones VarioFlash B is a flash pasteurization system for beer and beer mix beverages, built in 2019 by Krones AG at its Steinecker plant in Freising, Germany. It pasteurizes 20 - 45 hl/h in a three-stage plate heat exchanger with energy recovery, a heat retention tube and a cooling stage. Everything is mounted on a stainless steel skid with a horizontal 2,100 l buffer tank, and a freestanding stainless steel control cabinet with touchscreen HMI completes the system. Technical data Predpfx Amoz Ekdxexeb - Manufacturer: Krones AG (Werk Steinecker, Freising, Germany) - Model: VarioFlash B with cooling stage - Year of manufacture: 2019 - Machine type: flash pasteurizer with plate heat exchanger - Products: beer, beer mix beverages - Capacity: 20 - 45 hl/h - Pasteurization temperature: 71 - 85 °C - Holding time: 30 s at 45 hl/h - Max. CO₂ content: 6.5 g/l - Product inlet temperature: 5 - 15 °C; product outlet temperature: 16 °C - Energy recovery: approx. 91 % - Heating requirement at 85 °C: approx. 51 kW (approx. 90 kg/h steam at 6 bar(g), 165 °C) - Cooling requirement with water circulation at 5 °C: approx. 38 kW (5 m³/h glycol water, 2 - 10 °C) - Process water: inlet pressure 4.0 bar(g), inlet temperature 6 - 15 °C - Buffer tank: 2,100 l, max. allowable pressure -1.0 / +7.0 bar, allowable temperature -4 to +98 °C, CE marked Equipment - Plate heat exchanger with 3 stages: energy recovery, pasteurization with temperature control, cooling with temperature control - Heat retention tube with fixed length; PU control depending on temperature and flow rate - Hot water circuit with separate brazed plate heat exchanger, temperature control, circulation pump and expansion vessel - Sanitary product pumps: frequency-controlled product feed pump, booster pump for a positive pressure difference towards the unpasteurized product, frequency-controlled product pump to the filler - Horizontal stainless steel buffer tank, pneumatic valves, inline instrumentation and sanitary pipework on a tubular stainless steel frame - Freestanding stainless steel control cabinet with touchscreen HMI and main switch Condition Used. The system has been removed from production and is stored indoors. It can be inspected by appointment. Availability Immediately. Location: Germany.

Condition: used, Year of construction: 2012, Overview Complete Krones PET line from 2012 for carbonated water in non-returnable PET bottles of 0.5 L, 1.0 L and 1.5 L, rated at 16,000 bottles/h on the 1.5 L format. The line runs from preform feeding through a blow moulder-filler-capper bloc in a clean room, beverage treatment and CIP, inspection, drying, coding and wrap-around labelling, to shrink-film packing with handle application, palletizing and stretch wrapping. A separate sleeve section with sleeve labeller, steam shrink tunnel, inspection and two dryers is included. Technical data - Year of manufacture: 2012 - Output: 16,000 bottles/h (1.5 L) - Product: carbonated water - Bottles: PET, 0.5 L, 1.0 L and 1.5 L - Labeller: up to 20,000 bottles/h - Packer, palletizer and stretch wrapper: up to 24,000 bottles/h - Packs: shrink-film packs with carry handle, 3x2 and 4x3 - Pallets: 800 x 1200 mm and 1000 x 1200 mm - Electrical: 380/220 V, 3/N/PE, 50 Hz Scope of Delivery - Preform feed unit | Krones | CONTIFEED | with tilting device for the preform hopper | 2012 - Preform interior cleaning | Krones | PREJET | 2012 - Stretch blow moulder | Krones | CONTIFORM S8 | 16,000 bottles/h (1.5 L) | 2012 - Filler-capper | Krones | MODULFILL VFS | 60 filling valves, 16,000 bottles/h (1.5 L) | 2012 - Clean room | Krones | for the blow moulder-filler-capper bloc | 2012 - Closure conveyor | Krones | 2012 - Beverage treatment | Krones | CARBOFLOW | 2012 - CIP system | Krones | VARIOCLEAN | 30 m³/h | 2012 - Container conveyors | Krones | SYNCO | 2012 - Inspection machine | Krones | CHECKMAT 707 | 2012 - Container dryer | Krones | LINADRY | 2012 - Container coding | Videojet | inkjet coder | 2012 - Labelling machine | Krones | CONTIROLL COMBI | wrap-around OPP labels, up to 20,000 bottles/h | 2012 - Inspection machine | Krones | CHECKMAT 731 | 2012 - Sleeve labeller | Krones | SLEEVEMATIC | 2017 - Steam shrink tunnel | Krones | SHRINKMAT - Inspection machine for the sleeve section | Krones | CHECKMAT - 2 container dryers for the sleeve section | Krones | LINADRY | 2017 - Pack conveyors | Krones | MULTICO | 2012 - Shrink-film packer | Krones | VARIOPAC PRO FS | 3x2 and 4x3 packs, up to 24,000 bottles/h | 2012 - Handle applicator | Krones | VARIOSTICK | 2012 - Palletizer | Krones | MODULPAL | 800 x 1200 and 1000 x 1200 mm pallets, up to 24,000 bottles/h | 2012 Pjdpfjz Dw Uujx Amxjrb - Pallet conveyors | Krones | PALCO | 2012 - Stretch wrapper | Robopac | 2012 - Electrical power distribution for the line | Krones | 2012 Condition Dismantled and stored. Inspection on site by appointment. Availability Available immediately. Location: Georgia.

Condition: excellent (used), Year of construction: 2010, 200hl Steinecker Krones Brewhouse. Capable of 6 brews per day. Location: UK Available Immediately Including: • Steinecker Mill • Steinecker Cereal Cooker • Steinecker Mash Vessel • Steinecker Lauter Tun • Steinecker Holding Vessel • Steinecker Lauter Worth Heater • Steinecker Copper • Steinecker Whirlpool • Steinecker Wort Cooler • HLT & CLT • Hop Pellets Station • Vapour Condenser • Condensate Cooler • Spent Grain System Contact Indassol UK for Pricing and more details. Prjdsxb Uz Aspfx Amxob We are at Drinktec - Please reply to set up a meeting to discuss further.

Condition: used, Year of construction: 2000, machine/vehicle number: 690-264, Machine: KRONES KGW-65-S-E Crate washer Prsdpfx Asz Ablwemxob

Condition: used, Year of construction: 1987, with 2 stations Predpfx Amjzz Rppoxsb photo-oriented working direction: left-right Capacity: 8000 bph