Used premix Krones 2000 up to 45.000 lh

Krones

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) Formats: 250 ml – 1000 ml Application: Hot-fill and cold-fill beverage production Container types: Glass bottles and PET bottles (hot-fill) Filling temperature: 10°C – 104°C CO₂ capability: Yes Closures: Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off PET: 38 mm 3-start hot-fill closure Labelling: Cold glue paper labels (optional sleeve labelling available) Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones Bottle dryer | Europool | - | 2007 | High-speed air dryer Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt Conveyors | KHS / Krones | - | - | Complete conveying system Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial Pallet labeller | Logopack | - | - | Pallet labelling system Reverse osmosis system | MWT | - | - | Capacity 800 l/h Rjdpfx Afoyx I Awepobw

Condition: used, Year of construction: 1996, Monobloc filling machine from the renowned manufacturer Krones – model VHK 032 / SV 08. This machine is designed for filling alcoholic beverages (vodka, liqueurs, still drinks) into glass bottles with aluminum ROPP closures. Technical data: Rsdpfx Asyxv Ihjfpsbw Manufacturer: Krones (Germany) Year of production: 1996 Model: VHK 032 / SV 08 Machine type: monobloc (filling + capping) Output: approx. 10,000 bottles/h Filler: 32 valves (gravity system) Capper: 8 ROPP heads (aluminum, e.g. 28 mm) Technical condition: used machine, condition as shown in the photos, serviced and fully operational until end of production.

Condition: used, Year of construction: 2000, operating hours: 34,364 h, functionality: limited functionality, machine/vehicle number: 960-08, total width: 2,550 mm, total length: 3,600 mm, total height: 2,300 mm, type of input current: three-phase, outer diameter of label roll: 400 mm, inside diameter of label roll: 80 mm, overall weight: 4,000 kg, input voltage: 400 V, year of last overhaul: 2025, operating temperature: 25 °C, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, Krones Variomatic Machine for Sale A Krones AG Variomatic machine is offered for sale, designed for industrial use in bottling and winery environments. Manufacturer: Krones AG Year of manufacture: 2000 Serial number: 733-048 Quality management / origin: ISO 9001 Technical specifications: Supply voltage: 400 V Power type: 3-phase (3~) Frequency: 50 Hz Rated current: 20 A Capacity: approx. 6,000 bottles/hour Features: Krones Variomatic control / drive system Robust industrial design Reliable operation and long service life Can be integrated into bottling lines Rodeyb Db Hopfx Afpebw Applications: Wineries Beverage bottling plants Small to medium-capacity filling and bottling lines The machine comes from an industrial operating environment. Viewing is possible by prior arrangement. 📍 For further information, please feel free to contact us.

Condition: used, Year of construction: 1991, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used Krones Bonamatic labeling equipment, year of manufacture 1991. Wet-glue labeling machine with 2 stations (front, back, and neck labels), maximum capacity approximately 12,000 bottles/hour, 12 bottle tables, central control, suitable for both centered and non-centered bottles. - Excluding external bottle conveyor drive, including 2 glue pumps and glue storage buckets, including 9 different format part sets. Rbjdpfx Aeyw Izqofpjw - Includes spare/wear parts consisting of: 11 label magazines, various pressure rollers and brushes, 12 glue pallets, 11 gripper assemblies, assorted documentation, infeed and outfeed stars, spacers, 4 sets of tables, 4 feed worms. Year of manufacture: 1991 Factory number: 090-857 Voltage: 380 V Current type: 3~ Frequency: 50 Hz Current nominal: 18 A Wiring diagram number: 2-090-E0-857-0 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2004, AVAILABILITY: NOW W 117| KRONES PET BLOW MOLDER Model: Contiform S18 Year: 2004 Output: 24,000 bph for 2.0 L – 28,000 bph for 1.5 L Rotary 18 cavities 1 set of molds included Rbodpeywy S Uefx Afpow Automatic chiller Automatic preform feeder Automatic preform crate tipper Bottle ejector installed in the pneumatic conveyor Electrical control panel in Polish, English, and German Safety guarding

Condition: used, Year of construction: 2006, operating hours: 43,950 h, machine/vehicle number: LC614, Used KRONES PET complete line for ESL 12000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET ESL applications with UV cap treatment and is aseptic-ready. Engineered around Krones equipment, it delivers consistent performance for 0.5L and 1.0L formats. The line is suitable for industrial packaging and beverage production, especially for sensitive products requiring extended shelf life.Line type: PET ESL with UV cap treatment; aseptic-ready configurationMaximum line speed: 12000 bph (based on 1.0L)Formats: Compatible with 0.5L and 1.0L bottle formatsNeck formats: 38mmContainers: Designed for PET bottle handlingBlow molder: Krones Contiform S8, 8 cavitiesFiller: Krones VODM-PET counterpressure volumetric filler, 32 headsLabeling: Krones rotary labeler with 10 plates (10000 bph) and Krones rotary labeler with 8 plates (8000 bph)End-of-line: Case packer and Fanuc robot palletizer for EuropalletsOperating hours: Approximately 43950 hoursManufacturing year (main equipment): 2006Model references: Contiform S8, VODM-PETAdvanced Automation & Control SystemsThe line integrates modern automation with centralized HMI for recipe management, production counters, and real-time performance monitoring. Automatic valve and pump control supports consistent filling conditions and stable operation at target throughput.Automated production functions with HMI-based controlPerformance setpoint management and production counter visualizationUV cap treatment system integrated for ESL complianceDesigned for hygienic operation and stable fillingQuick recipe selection for 0.5L and 1.0L formatsProduction Line Integration CapabilitiesThis second hand complete bottling line is configured for inline operation from PET preform blowing through filling, labeling, case packing, and robotic palletizing. Conveyors and accumulation ensure smooth product flow with minimal stops.Inline configuration from blow molding to palletizingDual rotary labeling machines to optimize throughput across formatsFanuc robotic palletizer for Europallet patternsFormat changeover between 0.5L and 1.0L with dedicated change partsSuitable for beverage production workflows requiring ESL conditionsMachine Condition & Maintenance HistoryThe line remained in production until December 2025. It is still connected to the electrical network and can be demonstrated running. Overall hours are approximately 43950, reflecting a well-utilized but maintained system typical for industrial packaging environments. No refurbishments are declared, and the equipment has remained in service through recent operations.Operational until December 2025Connected and can be seen runningApprox. 43950 operating hoursCommercially maintained in a productio... Redpfoywk Srex Afpsbw

Condition: used, Rotary labelling machine for labelling bottles using two cold glue stations. Manufacturer: KRONES Model: PRONTOMATIC Year of manufacture: 1991 Capacity: 10,000 bph Carousel: 12 stations Configuration: 2 x heads for cold glue labels Rjdpfxeywckge Afpjbw Original electrical documentation. Technical condition: used machine, condition as shown in the photos.

Condition: used, Rotary labelling machine for bottle labelling using two cold glue stations. Manufacturer: KRONES Model: BONAMATIC Year of manufacture: 1994 Capacity: up to 10,000 bottles/h Carousel: 12-station Configuration: 2 x cold glue label heads Operating hours: 31,526 h Original electrical documentation. Rbodpeywciiofx Afpsw Technical condition: Used machine, condition as shown in the photos.

Condition: used, Year of construction: 1998, machine/vehicle number: SV03, Used Automatic Decapper Krones 10 heads year 1998Technical Specifications & Performance DataThe Used Automatic Decapper Krones 10 heads, model 360-10-113, stands as an exceptional choice for your industrial packaging needs. Built in 1998, this robust decapping machine is designed to efficiently handle high-speed bottling lines. With a production speed of 20,000 bottles per hour, it meets the demands of large-scale beverage production. Specifically designed for glass containers, it offers precision and reliability for processing various bottled products including water, juice, beer, and wine.Number of Heads: 10Electrical Requirements: 400V, 50Hz, 8.25ACondition: In StorageManuals: AvailableAdvanced Automation & Control SystemsAt the heart of this used bottling line machine is an advanced control system that ensures precise operation. The automation level is designed to streamline production processes, allowing for seamless transitions between different beverage types. The machine’s control panel features user-friendly interfaces, making it simple to operate while maintaining high safety and efficiency standards. Safety features integrated within the machine ensure that it complies with modern production safety protocols. This decapper operates on 400V with an electrical current of 8.25A, ensuring powerful and efficient operation.Production Line Integration CapabilitiesThe Krones decapping machine seamlessly integrates with other industrial packaging systems, making it a versatile component of any production line. Its capability to handle format changes efficiently makes it compatible with other equipment such as filling, labeling, and capping machines. The machine is engineered to support multi-product flexibility, accommodating a variety of beverage types and container shapes with ease.Machine Condition & Maintenance HistoryCurrently in storage, the Krones decapper is primed for redeployment. Although used, it remains in excellent condition, backed by a comprehensive maintenance history that attests to its reliable performance. Routine maintenance has kept the machine in optimal working order, ensuring longevity and operational efficiency upon return to active duty.Operational Performance & VersatilityThe machine excels in operational performance, offering versatility that meets multiple production needs. It is compatible with a variety of product types, making it ideal for companies that handle diverse beverage manufacturing processes. Its ability to adapt to different container materials, particularly glass, allows for flexibility and ease in switching between product lines, ensuring uninterrupted production.Installation Requirements & Site PreparationProper installation and site preparation are crucial for maximizing the performance of the Krones decapping machine. The unit requires a designated space that accommodates its operation and allows for safe and accessible maintenance. Additionally, utility connections must meet the specified electrical requirements of 400V and 50Hz to ensure optimal functionality.Safety Standards & Compliance CertificationSafety is paramount in industrial packaging operations... Rsdpfx Aevgu D Eefpjbw

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Rbedpfx Afow D E Ubopow Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...