Labelling machine

Krones

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Hfsdsvxtavspfx Ab Nsg

Condition: used, Year of construction: 1999, Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pick&Place neckhandling system Integrated foaming system Neumo butterfly valves Hfedpfx Aewiizpsb Neg

Condition: used, Year of construction: 2015, Overview The Kosme / Krones Barifill is an isobaric filler that is currently in operation in a German brewery and can be seen in operation. The machine was manufactured by Kosme in 2015 and installed in 2016. It has a maximum output of 8,000 bottles per hour and the rated speed of the manufacturer is 7,000 bph. The system is designed for 26 mm crown corks and has 30 filling stations. Technical details  Output: 8,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0,5 NRW 0,5 Longneck 0,5 Lochmund 0,33 ALE 0,33 SUD 0,33 Steinie Bügel Filling stations: 30 Electrical specifications: Max. Voltage: 3x400 V + N + GND 50Hz Power consumption: 13,00 kW Operating hours: 18393 (March 2025) Spare parts included: Drives Gearboxes Cardan Shaft others Serviced by Kosme/Krones each year Lifting cylinders in 2024 Valves and capper in 2025 Features: Bottle shower High pressure injection for foaming Bottle stopper Table flushing Bunker for crown caps Hodpfx Aev Ic Uzeb Nefg

Condition: used, Year of construction: 2015, Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 Teilungsdurchmesser: 125,6 mm Ausrichtung der Flaschenteller über Danfoss-Servoantriebe Erkennung von beschädigten oder umgefallenen Flaschen am Einlauf Stoppstern am Einlauf Leimwalzen aus Stahl Vorbereitet für Flaschenausrichtung durch Kameraerkennung Heissleimwerk für Siegeletikett von Robatech Heissleimdüse an der Etikettierstation montiert Siemens S7 Technische Dokumentation vorhanden Lieferumfang Datumscodierer Leimpumpen Unipump H (heizungsgesteuert) Hjdpfxov I Tnxs Ab Nsfg

Condition: used, Year of construction: 2004, machine/vehicle number: M323, Used combi KRONES contiform S8 + mecafill triblockTechnical Specifications & Performance DataThis rotary blow-fill-cap monoblock is engineered for high-quality PET bottle handling and beverage production. Manufactured by Krones, it integrates a Contiform S8 stretch blow molding section with a Mecafill filling block and a Krones capping unit, delivering efficient performance for still and sparkling water. Designed for industrial packaging environments and suitable for integration into a used bottling line or as a second hand standalone system, it combines precision, reliability, and reduced footprint.Manufacturer: KronesModel configuration: Contiform S8 + Mecafill (integrated tri-bloc)Year of manufacture: 2004Maximum speed: up to 12,800 bottles per hourContainer material: PETCurrent bottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum bottle height: 350 mmRotation/direction of work: ClockwiseNeck type: AlaskaBlow molder molds: 8 cavitiesGrippers (in/out): 8Mandrels: 220Blowing pressure: 40 barElectrical supply: 400 V, 3 PH, 50 HzControl systems: Siemens PLC with Krones HMIAdvanced Automation & Control SystemsThe monoblock features an integrated automation suite designed to simplify operation and reduce changeover times. The Siemens PLC platform coordinates the stretch blow molding, filling, and capping phases, while the Krones HMI provides intuitive process visualization, recipe selection for multiple bottle formats, and operator diagnostics. Rotary motion ensures smooth container transfer between stations, minimizing scuffs and misalignment. Electronic setpoints for speed and temperature profiles improve consistency across shifts and batches. Safety interlocks and guarded access points support reliable operation during beverage production.Production Line Integration CapabilitiesEngineered for seamless integration, this monoblock can operate inline with upstream preform feeding and downstream conveyors, labelers, inspectors, and secondary packaging machinery. It fits modern beverage production and industrial packaging layouts, supporting flexible format changes across 0.5L, 1.0L, and 1.5L PET bottles. The integrated design reduces footprint and transfer points compared to separate machines, enhancing efficiency in both new installations and upgrades of a used bottling line.Machine Condition & Maintenance HistoryThe machine is refurbished and guaranteed, ready for operation with compatible spare parts available. It is supplied in excellent working condition, tested, and prepared for immediate deployment. A 6-month warranty underscores its reliability and provides added assurance for second hand equipment buyers.Operational Performance & VersatilityThis tri-bloc configuration is optimized for water bottling, including both still and sparkling products. The blow molding section with 8 molds delivers stable out... Hfsdpeyz R H Dsfx Ab Neg

Condition: used, Year of construction: 2018, Overview This can filling line consists of equipment from Krones, KHS, Ferrum, Kisters, Hein, Strema and additional line components. The line is designed for beverage production in cans with a nominal capacity of approximately 60,000 cans per hour. The main filling and closing section includes a KHS Innofill EMD 108S filler and a Ferrum F812 can seamer, both rated at 60,000 cans/hour. The line also includes modern inspection and handling equipment, including a Krones Checkmat from 2023, several Krones machines from 2018, and a Strema A5000BII from line covers the core process from can handling and filling through seaming, inspection, pasteurization, packaging and conveying. Several machines have been modernized or upgraded over time, making the line a combination of proven core filling technology and newer inspection, packaging and auxiliary equipment.   Technical Data Capacity: approx. 60,000 cans per hour Container type: Standard cans 500ml & 330ml Condition: used line, very good condition, well maintained Application: Beer, Carbonated soft drinks   Scope of Delivery Can Depalletizer | Krones | Pressant | Automatic can depalletizing system | 2018 Empty Can Inspection | Krones | Cantronic 709 | 2018 Can Rinser | Hein | Can rinsing system | 1978 Can Filling Machine | KHS | Innofill EMD 108S | Can filling machine for beer and carbonated soft drinks | 1997 Can Seaming Machine | Ferrum | F812 | Can seaming machine | 1997 Cap / Lid Feeding System | CSW |Lid feeding system for can seamer | year tbd Fill Height Inspection | Krones | Checkmat 731 | 2023 Tunnel Pasteurizer | KHS | Innopas | Tunnel pasteurization system | 2001 Can Dryer | Gesete | BasicLine | 2018 Fill Height Inspection | Krones | Checkmat 707 | Fill height inspection system | 2018 Tray and Shrink Packing Machine | Kisters+ZEVA | 197/60+ST/II-600V ; completely overhauled in 2015 | 1992 Grouping Station | Krones | Robobox T-GS | Product grouping station before palletizing | 2018 Palletizer | Krones | Modulpal | Automatic palletizing system | 2018 Pallet Stretcher / Wrapper | Strema | A5000BII | 2021 Pallet Labelling Machine | Logopak | 850 P3 T02 P06 | 2022 Pallet Conveyors | Krones | Pallet transport system | 2018 Tray Conveyors | Krones | Tray transport conveyors | 2018 Can Conveyors | Krones | Can conveyor system | 2002 Additional Information The tray and shrink packing machine was originally manufactured in 1992 and completely overhauled in 2015. The line combines proven core filling technology with several newer Krones handling and inspection components. Offered used, as-is, without guarantee. Hfjdpfjy Rxtqsx Ab Neg

Condition: used, Year of construction: 2016, Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology. Additional title: Empty bottle control Capacity filline line: 12000 bo/h Current: 6 A Voltage: 400 / 230 V Frequency: 50 Hz Running direction: left -> right Operation / Control: Simatic S7 Position: in a footed housing Base construction: straight-running Hedsy Nnbbopfx Ab Nofg Features: Control and display panel, housing with safety doors, bottle discharge

Condition: used, Year of construction: 2005, 6-head packer for 0.5 litre and 0.33 litre glass bottles: Krones Linapac II E35 LT1G Bottle holder: 6 x 20 or 6 x 24 bottles Additional title: Packing machine for bottle crates Performance: 50000 bottles/h Air consumption: 0,0002 m³ / bottle Hsdpfxjxbqldo Ab Nefg Power: 24,5 kW Voltage: 230/400 V Frequency: 50 Hz Length: 6160 mm Width: 4120 mm Height: 5033 mm Formats: 0.5 l glass bottle (D = 68.5 mm, H = 270 mm; Ale / Longneck), 0.33 l glass bottle (D = 61 mm, H = 238 mm; Ale / Longneck) Running direction: right -> left Operation / Control: PLC, control cabinet with touch panel Position: free standing Base construction: Square tube frame on dome feet Features: 1 basic machine (lifting mechanism, horizontal linear unit, gripper head carrier, movement axes), 2 gripper head sets (frame with 6 ring gripper heads, 20 (24) ring grippers each, pulling device, manual changing device, insertion frame, vibrator set, folding unit for completeness control, terminal strips for guide plate adjustment), shelf magazine (magazine locations with drive for automatic storage), container transport, container transport, safety device, electrical and pneumatic equipment Periphery: Buffer tables for empty and full boxes Layer patterns: 6 x 20 across, 6 x 24 across, 20 plastic crate (400 x 300 x 300 mm), 24 plastic boxes (400 x 300 x 270 mm),

Condition: used, Year of construction: 2000, Conveyor belts for glass bottles, with 2 unpressurised converging conveyors Transport with 1, 3 or 4 conveyor belts Capacity: 30,000 bottles/h Manufacturer: Krones Year of construction: 2000 Additional title: free container conveyors Capacity approx.: 33000 Bottles/h Free bottle transport approx.: 115 m 90° Bottle transport curves: 10 pc. Conveyor belt widths: 4 conveyor belts Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW Operation / Control: Simatic S7-400 / S7-300 Material: Mainly stainless steel Position: free standing Features: Conveyor frames, deflection stations, drives, frequency controls, electrical switching devices, 2 pressureless bottle mergers (17/9/7/5/3/1 and 12/7/3/1 conveyor belts), automatic belt lubrication Hjdpsw Ta Hcjfx Ab Nofg

Condition: used, Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labeling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labeling stations - bottle transport Additional title: years of manufacture: 1975 - 1979 Capacity: 9000 bo/h Hsdpfxow Tmt Aj Ab Nsfg Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate Features: empty bottle inspector; bottle filler and capper (28 filling valves and 7 capping heads); screw-capper; labelling machine; bottle transport