Coordinate measuring machine

Leitz PMM 1210 / PH10 und SP25 Scanningsystem

Condition: used, GOM - ATOS III Rev.02.1 - 3D Measuring Device Lodpfxexr Umgo Agderi Condition: Used, very good. Technical specifications: Camera system: 2 x 8,000,000 Camera pixels: 2048 x 2048 pixels (approx. 4 megapixels) Measuring field sizes XYZ: 150 x 150 x 100 mm up to 2000 x 2000 x 2000 mm Measuring point distance: 0.075 mm to 1.0 mm Scan time: approx. 2 seconds Measuring volume: 700 series (incl. calibration plate) Blue light technology: Precise measurements independent of ambient lighting. Includes computer equipment and USB dongle Software version: 2023 Includes Tritop System (camera, 2x 1m reference scales, license) All in original cases With tripod, PC, rack, monitor, small tools, reference points, 1x probe Plug in and start working immediately…

Condition: ready for operation (used), T&S ConturoMatic T2 Contour Measuring Device Optical-incremental measuring system Measuring speed 0.1...3.0 mm/s Positioning speed up to 25 mm/s Measuring point spacing 0.5...25 µm Accuracy ±(0.9+L(mm)/100) µm Radius accuracy ±0.005% of the nominal value at R 12.5 mm Distance accuracy ±(1.2+L(mm)/100) µm Angle accuracy ≤ 30'' Technical data has been adopted. You are welcome to visit us for a viewing. We would be happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. Lrsdpfjwak Nvox Agdei For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: good (used), Year of construction: 2023, This paint booth is being sold on behalf of a customer and can be inspected under power. Lrodpjylm U Rofx Agdsi

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 280 mm, measuring range Z-axis: 350 mm, overall weight: 100 kg, workpiece weight (max.): 50 kg, Equipment: type plate available, High-end contour and roughness measuring system with air-bearing motion axes, up/down measuring function and X-sensing. Anytime optionally via software updatable functions: - Motorized Y-Supporting table Scope of supply: - Basic mechanics with integrated Y-adjustment table - Integrated control system - integrated gauging force regulation - software option roughness - Software option for measurement and evaluation of the following standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Prüfblatt (SEP 1940) - PC W11/64Bit; 24"TFT flat screen; - Compressed air unit consisting: Particulate filter 25µm/0.1µm, oil filters and water separator 2 precision pressure regulator mounted on base with stand - ConturoMatic Software; user manual - Software add-on for roughness calculation - Cable set - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Description of the up down function: Lrodpfx Ajwzlcaegdoi The scanning of surfaces in two directions is possible by the measuring direction switching function. This can be assessed without loss of the relationship to other scans from the same measuring process. Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs. Additional evaluation possibilities are for example - Raceway diameters - Diameter - Thickness variation - Parallelism - Cone angle measurement - Calculation of pitch deviation - Thread testing (thread calculation software optionally) etc. Technical data contour and roughness measurement: Aerostatic linear bearings (X and Z) Measuring range Contour 280mmx350mm (X/Z) Measuring range Roughness 280mmx350mm (X/Z) Suitable range Ra Ra from 0.05µm* Suitable range Rz Rz from 0.5µm* Resolution 1nm Sensing system optically incremental 1 point measuring in X direction (static) Accuracy +/-(0.85µm+L/100)µm* [L=mm] Measuring speed contour 0.1-3mm/s self-optimizing Measuring speed roughness 0.1-0,5mm/s self-optimizing Positioning speed up to 25mm/s Probing force contour 30mN Probing force roughness 7.5mN Table load 25kg weight: 96kg * According to our specified terms- Subject to change without notice

Condition: like new (used), Year of construction: 2015, functionality: fully functional, For sale is an optical measuring system GOM ATOS CORE 80, year 2015, measuring field 80x80mm, including GOM measuring table (height stand and rotary-tilting table), including software, computer, etc. It has seen extremely little use. Lrodpfxsxnr Dbj Agdsi

Condition: new, Year of construction: 2026, functionality: fully functional, CONVEYOR BELT TUNNEL WASHING MACHINE - The components to be clean are carried on a continuos moving stainless steel belt conveyor or a stop and go pallet conveyor. The design transfer time/speed and the tunnel dimensions are design in accordance to customer’s cycle time and production need. The synergy between chemical, thermal and mechanicals actions, enable to create an accurate and high efficient washing removing all contaminants from the components with excellent cleaning results. Lodpfx Aowdfnzjgdjri The tunnel can be easily inspected thanks to doors installed along the tunnel in correspondence with each active station, the pumping system and filtering devices through stainless steel spray manifolds achieve maximum treatment accuracy and efficiency with stainless steel nozzles of suitable capacity. The spray pressure is controlled by pressure gauges and in regulated by ball valves.

Condition: good (used), Year of construction: 2015, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: CRYSTA-Apex S9108 Year of manufacture: 2015 Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Accessories: Ledjyhmg Sopfx Agdsri Probe head interface: PH10MQ Probe head: Renishaw TP2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 As specialists, we are happy to offer you personalized advice to find the right machine for your measurement requirements. Worldwide delivery available on request!

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: C1210000251, Yxlon Multiplex 5500 M – Industrial X-Ray & CT Inspection System The Yxlon Multiplex 5500 M is a powerful, fully digital X-ray inspection system for non-destructive material testing (NDT/NDE). It is ideally suited for applications in the automotive, aerospace, electronics manufacturing industries, as well as for cast and structural components. The system offers precise 2D radioscopy and can optionally be upgraded to a fully-featured 3D computed tomography (CT) system. Main Features Lrjdpfoyg Iqvsx Agdsi • Fully digital X-ray system with HDR radioscopy and CT option • Automatic Defect Recognition (ADR) integrable • Ideal for steel, aluminum, ceramics, and plastics • High resolution via CCD camera + image intensifier • Intuitive operation via central control console • High throughput for serial inspections Technical Data (Y.Multiplex 5500 M) Inspection Chamber & Capacity • Maximum part size: Ø 600 mm, 900 mm height • Maximum part weight: 60 kg • Typical throughput: 30 s for 6 positions System Data • Cabin height: approx. 2650 mm • Cabin width: approx. 2650 mm • Cabin depth: approx. 1900 mm • Total cabin weight: approx. 6500 kg • Operator console: approx. 250 kg Electrical & Power • Power supply: 3 × 230/400 V, 50 Hz • Power consumption: approx. 4.5 kVA • Main fuse: 40 A slow-blow Detector Technology • Active area: 204.8 × 204.8 mm • Pixel matrix: 1000 × 1000 active • Pixel size: 200 µm • Energy: 40 – 225 kV Manipulation & Axes • Multiple automatic/manual axes (4–7 depending on model) • U-arm manipulator for flexible positioning Condition & Applications Thanks to its modular design, reliable Siemens drives, and high-quality X-ray technology, the Yxlon Multiplex 5500 M provides a durable, precise, and efficient inspection platform. Ideally suited for: • Serial inspection & inline quality control • CT analysis of internal structures • Analysis of casting and porosity • Electronics and solder joint inspection • Aerospace and automotive components Scope of Supply • Complete Yxlon Multiplex 5500 M X-ray system • Operator console • X-ray detector incl. image intensifier • Siemens drive & control technology • Original operating manual

Condition: used, Year of construction: 2007, Technical details: weight of the machine ca.: 3 t measurement range X =: 650 mm measurement range Y =: 1200 mm Lsdsvap Skopfx Agdsri workpiece weight: 700 kg traversing speed: 200 mm/s capacity: 1000 VA Design: Portal measuring center with fixed measuring table and laterally driven portal, measuring table, traverse and quill made of granite. All axes are equipped with high-precision air bearing guides. It is driven by DC servo motors. Control: 3-5 axis microcontroller with vector path control Measuring system: Incremental length measuring system, resolution 0.5 m Computer: Industrial PC, Pentium class, Windows 2000 operating system, multilingual Software: MarSoft Vision 3D multisensor 3D, measuring software *

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, power: 3 kW (4.08 HP), Blasting system with carousel; parts are evenly blasted all around. Highly cost-efficient thanks to unique, airless blasting technology for surfaces of the highest quality. New price approx. 65,000 CHF. Operating manual available. Inspection and testing possible. Very good condition. Type: Twister Machine number: 18/141 Year of manufacture: 2018 Operating voltage: 400 V Frequency: 50 Hz Connected load: 5.0 kVA Weight: 400 kg Maximum power: 3 kW Maximum rotational speed: 9,000 rpm If you have any queries or require further information, please feel free to send us a message or call us. Ljdpfx Aoykl Sfegdsri