Vertical Balancing Machine

MBS BALANCE V-IVB-100 Vertical Balancing Machine

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm Nwsdpfxox Ein Se Afcjc - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: used, GOM - ATOS III Rev.02.1 - 3D Measuring Device Condition: Used, very good. Technical specifications: Camera system: 2 x 8,000,000 Camera pixels: 2048 x 2048 pixels (approx. 4 megapixels) Measuring field sizes XYZ: 150 x 150 x 100 mm up to 2000 x 2000 x 2000 mm Measuring point distance: 0.075 mm to 1.0 mm Scan time: approx. 2 seconds Measuring volume: 700 series (incl. calibration plate) Blue light technology: Precise measurements independent of ambient lighting. Includes computer equipment and USB dongle Software version: 2023 Nsdpfx Asxr Umgefcjwc Includes Tritop System (camera, 2x 1m reference scales, license) All in original cases With tripod, PC, rack, monitor, small tools, reference points, 1x probe Plug in and start working immediately…

Condition: ready for operation (used), T&S ConturoMatic T2 Contour Measuring Device Optical-incremental measuring system Measuring speed 0.1...3.0 mm/s Positioning speed up to 25 mm/s Measuring point spacing 0.5...25 µm Accuracy ±(0.9+L(mm)/100) µm Radius accuracy ±0.005% of the nominal value at R 12.5 mm Distance accuracy ±(1.2+L(mm)/100) µm Angle accuracy ≤ 30'' Technical data has been adopted. You are welcome to visit us for a viewing. We would be happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Njdpfxowak Nve Afcewc Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, warranty duration: 12 months, total height: 3,600 mm, type of input current: three-phase, We are offering our test and demonstration machine from our Solution Center for sale. Additional machines are available—please feel free to contact us for details. Leitz | PMM 12106 with PH10 and SP25 Scanning System Refurbished coordinate measuring machine featuring the latest Renishaw technology Modernized in 2021 Measuring range XYZ: 1200 x 1000 x 600 mm Measurement uncertainty MPE (E0): 1.2 + L/400 in µm Equipment: - Renishaw UCC S3 controller, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - TONiC™ linear encoder system on all axes - Renishaw PH10 motorized indexing head with SP25-2 scanning system, including FCR25-L6 (6 port) probe changer - MODUS metrology software, latest version, with CAD import (STEP format), including 1-year software maintenance - PC system with Windows 10 and two new 27" TFT monitors, height-adjustable desk included - Control cabinet with state-of-the-art safety features - M6 base plate We are happy to customize the configuration to meet your requirements. Machine sales and service only available within Germany! Optional service packages upon request: Nodpsvxh Diefx Afcjwc Free curbside delivery | Commissioning | Inspection | Accuracy certification according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Additional options and configurations available upon request

Condition: ready for operation (used), Year of construction: 2001, A fully equipped Zeiss coordinate measuring machine with various accessories and software licenses is available. Measuring dimensions X/Y/Z: 3000mm/1600mm/1000mm, probe head: Zeiss VAST, probe system type: VAST, software: Calypso 2023 ServicePack1_Version 7.6.04, operating hours: approx. 70914h. Machine dimensions X/Y/Z: approx. 4150mm/2450mm/3850mm, weight: approx. 12500kg. Including Zeiss air filter unit, probe rack, reference probe, 8x probe systems, calibration sphere, stand, consoles and stair platform. License transfer possible. Documentation available. On-site inspection is possible. Nedpfx Asyhgm Eefcswc

Condition: like new (used), Year of construction: 2015, functionality: fully functional, For sale is an optical measuring system GOM ATOS CORE 80, year 2015, measuring field 80x80mm, including GOM measuring table (height stand and rotary-tilting table), including software, computer, etc. It has seen extremely little use. Njdjxnr Dbjpfx Afcswc

Condition: good (used), Year of construction: 2023, This paint booth is being sold on behalf of a customer and can be inspected under power. Nodpfx Afjylm U Recewc

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 065014, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, Measuring range X/Y/Z: 800 / 1000 / 700 mm Max. length measurement deviation: MPEe = 2.7 + L/300 µm Probe head: PH10M, Renishaw TP200 Accessories: HT400 control unit, reference sphere, 18-piece set of styli/extensions, rack for stylus change Software: Quartis R2025-2, including additional modules Quartis Surf and Curve for measuring surfaces and curves, without PC Last maintenance: 12/2021, acceptance report available in documents Very good condition, fully functional, documentation available Inspection at the facility is possible Sale without warranty, including transport packaging and loading, available from March 2026 Nedpfxex Au Hne Afcowc

Condition: new, Year of construction: 2026, functionality: fully functional, CONVEYOR BELT TUNNEL WASHING MACHINE - The components to be clean are carried on a continuos moving stainless steel belt conveyor or a stop and go pallet conveyor. The design transfer time/speed and the tunnel dimensions are design in accordance to customer’s cycle time and production need. The synergy between chemical, thermal and mechanicals actions, enable to create an accurate and high efficient washing removing all contaminants from the components with excellent cleaning results. Nodpfxjwdfnzo Afcowc The tunnel can be easily inspected thanks to doors installed along the tunnel in correspondence with each active station, the pumping system and filtering devices through stainless steel spray manifolds achieve maximum treatment accuracy and efficiency with stainless steel nozzles of suitable capacity. The spray pressure is controlled by pressure gauges and in regulated by ball valves.

Condition: good (used), Year of construction: 2010, Zoller Venturion 450 Machine type: Measuring machine Manufacturer: Zoller Model: Venturion 450 Njdoyk S T Aopfx Afcewc Year of manufacture: 2010 Control system: Zoller Origin: Germany Location: Albstadt Delivery time: by arrangement Technical specifications: - Operating voltage: 100 - 240 V - Machine weight: 450 kg - Machine width: 2800 mm - Machine height: 2320 mm - Depth: 1030 mm - Space requirement: 3000 x 2000 x 2600 mm - Control unit weight: 80 kg - Tool weight (max.): 50 kg - Frequency: 50 / 60 Hz - Power: < 1 kVA - Compressed air: 6 - 8 bar