Twin chamber oven

LINN EHWS-3-Spez.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2010, tire size: -, Year of construction: 2010, ref: 299668 Schwarzmüller short ADR 3-axle container chassis for special acid containers ABS air-suspended 3 x Mercedes - 9 to. axles 1st axle liftable Lifting/lowering device Tires: 385/55 R 22.5 Unladen weight: 3,650 kg 36,000 kg GG. (39,000 kg technically possible) Dimensions: 8,200 x 2,550 mm German semi-trailer Hnahwhi72 TÜV / HU / SP on request and for an extra charge: new! Subject to errors and prior sale!

Condition: excellent (used), Weiss Type: WK 27'/50-150 Water-cooled climate test chamber Program control with Simpac Simpac is a self-monitoring, digital 32-bit measurement and control system and was specially designed for use in test cabinets. With its computing power, Simpac meets the requirements of process engineering and simplifies the input function with a specially developed control unit. Technical data: Test cabinet designation: WK 27'/50-150 Working range temperature Temperature range -50°C to + 150°C, discontinuous Temperature constancy ≤ ± 0.3 to 1.0 K (time-wise) Cooling rate approx. 1.0 K/min. on average from +80°C to -40°C with test object mass and without thermal load, measured in the outlet of the recirculation system Heating speed approx. 1.0 K/min. on average from -40°C to +80°C with test object mass and without thermal load, measured in the outlet of the recirculation system Test object mass 1000 kg with steel (80%) and plastic (20%) Working range climate Temperature range +10 °C to + 90°C Temperature constancy ≤ ± 0.1 to 0.5 K (time-wise) Humidity range 15 ... 95 % r.h., without thermal load Humidity constancy ≤ ±5 % r.h. (time-wise) Dew point temperature range +4 °C to +89 °C without thermal load Humidifier capacity max. 56.0 kg/h Test chamber and unit dimensions Test room dimensions Height approx. 3000 mm Width approx. 3000 mm Depth approx. 3000 mm Chamber external dimensions Height approx. 3500 mm Width approx. 3400 mm Depth approx. 4000 mm Install dimensions, as chamber is delivered compactly Height approx. 4300 mm Width approx. 3600 mm Depth approx. 4800 mm Machine unit Height approx. 1900 mm Width approx. 2000 mm Depth approx. 1200 mm Chamber door, two-winged Height approx. 3000 mm Width approx. 3000 mm Door design attached door with threshold Door window, in each door leaf Height approx. 600 mm width approx. 450 mm Window in the left side wall height approx. 800 mm width approx. 800 mm 4 ducts, ∅ 125 mm Lighting by 4 halogen spotlights, switch on the outside of the door Floor load capacity 30,000 N/m² (surface load) 4,000 N/wheel (4 cm²/wheel, wheel load) Mains connection 400 V; 3 PH + N + PE; 50 Hz Connection power approx. 140.8 kW Connection current approx. 225.0 A Refrigerants R 407F and R 23 Weight: 7000 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See image) B23Ojymkvw (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Functionality: fully functional, The following item is for sale: - Our offer number: 3/129 4/129 - Spectrometer + combination lamp 2 devices in a set - Manufacturer: J&M Analytik - Type: Tidas-E PK/Teval/S + LDH 703010 - Serial number: 920925030 921028033 - Power: 230 V - Dimensions: WxDxH 530 x 430 x 180 mm - Weight :1 device 15,6 Kg 2 device 16,5 Kg - optical condition according to photos - used - functional Ciweq8B0My - shipping in 2 packages Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Jwt9nu Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods available.

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, pressing force: 3 t, Brand: CETTA Type: HHP-3 Type: 3t Coouf8Pbpw Max. pressing force: 60 kg f/cm3 Stroke length: 150mm open height:250mm Year of manufacture: 2018 Power: 3x200V, 2.5kW

Condition: like new (used), load capacity: 6,500 kg, height adjustment type: hydraulic, Equipment: foot remote control, The drive for the rotation of the clamping plate, to which the part to be machined is part to be machined is attached is driven by a powerful combination of electric and oil-hydraulic drives. Lifting, lowering and tilting are performed by high-quality oil-hydraulic cylinders, oil-hydraulic cylinders. The main advantages of using the "Rotolift" are greater efficiency for the company and ergonomics for the operator. efficiency for the company and ergonomics for the user. This has a This has a positive effect on the quality of workpiece processing and reduces costs. Compared to conventional positioning of workpieces with cranes, costly non-productive times are also costly non-productive times are also considerably reduced. Load capacity 6500 KG Horizontal height min. 960 mm Horizontal height max. 2420mm Height tilted to center min. 900mm Height tilted to center max. 2380mm Total length 3600mm Total width 1400mm Disc diameter 1500mm Bru8Hjuf Weight 3424 KG with many clamping accessories and additional accessories Top condition

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm B3Pubpyqtu Total height: 1300 mm Weight: approx 250 kg

Condition: excellent (used), Catalog number: 7531 TECHNICAL DATA Equipment: plate tape feeder guillotine glue tank (granulate) 3 pressure rollers finished cutting unit with balls 2 milling units for shaping edges (radial cutters) 2 polishers min. length of the workpiece 140mm min. width of the workpiece 60mm thickness of the glued element 10-55mm thickness of the edge tape 0.4-3mm support extending from the table engine power 5.6kW diameter of the exhaust nozzle 120mm Dq2Cgn dimensions L/W/H 3480x1050x1020mm weight approx. 900kg – unpainted – Austrian production – year of production 2007 – very good condition good – used edge banding machine Net price: 18900PLN Net price: 4447 EUR Net price calculated according to the exchange rate of 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: new, Year of construction: 2024, We convert laser cutting machines from CO2 to fiber laser Dktyrx

Condition: new, Functionality: fully functional, mileage: 10 km, power: 103 kW (140.04 HP), first registration: 02/2025, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: mechanical, Equipment: ABS, air conditioning, cruise control, soot filter, traction control, trailer coupling, Peugeot Boxer 3-way tipper new car German car immediately available Double cab 7-seater ALSO AVAILABLE Single cab Drbobr Rear view camera, air conditioning, Bluetooth, cruise control, trailer hitch, radio, and much more. We are happy to offer leasing or financing!

Condition: excellent (used), Drawer cabinet with three telescopic drawers and doors width 550 mm depth 660 mm height 710 mm 1 drawer : 50 mm internal height Chpjl93Mug 80 mm inner height 110 mm internal height 1 drawer

Condition: like new (used), load capacity: 6,500 kg, Equipment: foot remote control, The drive for the rotation of the clamping plate, to which the part to be machined is part to be machined is attached is driven by a powerful combination of electric and oil-hydraulic drives. Lifting, lowering and tilting are performed by high-quality oil-hydraulic cylinders, oil-hydraulic cylinders. The main advantages of using the "Rotolift" are greater efficiency for the company and ergonomics for the operator. efficiency for the company and ergonomics for the user. This has a This has a positive effect on the quality of workpiece processing and reduces costs. Compared to conventional positioning of workpieces with cranes, costly non-productive times are also costly non-productive times are also considerably reduced. Load capacity 6500 KG Manual remote control Foot remote control Horizontal height min. 960mm Horizontal height max. 2420mm Height tilted to center min. 900mm Height tilted to center max. 2380mm Total length 3600mm Rpvsy2W30X Total width 1400mm Disc diameter 1700mm Speed infinitely variable from approx. 0.001 to 0.6 rpm with digital display weight 3424 KG with many clamping accessories and additional accessories Top condition additional clamping fixture or disk

Condition: used, Touches 3-points Steady for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm B3Poovxbry Weight: approx 250 kg

Condition: excellent (used), CATALOGUE NUMBER 6978 TECHNICAL DATA - spindle diameter 25mm - spindle working height 100mm - interchangeable spindle - spindle locking - adjustable up/down C0Tedmgv2Q - original cast iron guide with full adjustment - 4 types of rotation speeds + right/left 3000/4500/6000/9000 rpm - table top dimensions 1020x900mm - brake - 3.8kW engine - dimensions length/width/height 1080x960x1090mm - weight 442kg ADVANTAGES - Polish production - brake - very good condition - used milling machine Net price: PLN 8200 Net price: EUR 1930 Net price calculated according to the exchange rate of 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: good (used), Year of construction: 1986, Functionality: fully functional, MACHINE IS IN FULLY FUNCTIONAL CONDITION ATTENTION: OVERSIZE TRANSPORT DIMENSION S8Tgnvqfk 2800 X 2800 X 2600 MACHINE IS AWAILIBLE FROM END OF JANUARY 2025

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, axle spacing: 1,000 mm, total height: 3,200 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Bigu3X3Fmku Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Working width: 950 mm Maximum plate height: 340 mm Belt feed speed: 4.5/9 m/min Motor power: 7.5 kW 1 unit with a steel roller 2nd unit: combination – rubber roller + pad Pad automatically activated Oscillation controlled by photocells 2 conveyor belt speeds Electric table height adjustment Year of manufacture: 2007 Weight: 1010 kg Bb8Hmwsbdk Paper dimensions: 1900x970 mm

Condition: new, Year of construction: 2024, Welding rotary table Protec KT 10 000 HV Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 Dimensions: height tilted min: 1080mm height tilted max: 2200mm height horizontal min: 1400mm diameter of the clamping disk 2000mm length 3250mm, width 1780mm Cvfcxc702Y speed from 0,05 to approx. 0,6 rpm.

Condition: excellent (used), CATALOGUE NUMBER 7467 Technical data: Uj87Wbyw0Z tenting trolley: - mechanical trolley feed - table size L/W 600x300mm with extension up to 1150mm - transverse gear on the trolley - pneumatic pressure - saw for cutting to length: - max. blade diameter 300mm - max. cutting height 80mm - blade adjustable up/down + right/left - blade guard - diameter of the exhaust port 100mm - saw motor 2.2kW tenting mandrel (tenoning machine): - mandrel adjustment up/down - max. tool in the attachment 360mm - spindle diameter 40mm - length of mounting on the mandrel 140mm - 2 types of spindle speeds 2500, 4000 rpm - diameter of the exhaust port 120 mm - 6 kW motor profiling mandrel (milling machine): - adjustment of the mandrel up/down - max. tool in the attachment 220 mm - length of mounting on the mandrel 140 mm - spindle diameter 30 mm - 3 types of spindle speeds 4500, 6000, 9000 rpm - diameter of the exhaust port 120 mm - support extendable from the table - 7.5 kW motor saw for cutting out the glazing bead: - max. disc diameter 250 mm - diameter of the exhaust port 80 mm - 2.2 kW motor feed: - number of rollers 6 pcs - motor power 750 W - 4 types of rotation speeds + right/left - pressure working 6-8 bar - dimensions l/w/h 2700x2020x1650mm - weight approx. 1800kg Advantages: - for window production - upper control panel - saw for cutting to length - tenoning pin - material transfer from tenoning to milling - unpainted - used machine, very good condition Net price: PLN 17,900 Net price: EUR 4,210 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, 3D perforated table 2400 x 1200 x 200mm, grid 100mm, plate thickness 20mm, hole diameter 28mm, Qea7Tfny0 Plan machined, very solid weight approx. 950 kg With table base Price is without accessories

Condition: excellent (used), CATALOGUE NUMBER 7452 TECHNICAL DATA PLAIER: - shaft width 410mm - 4-knife shaft - adjustable guide at an angle - length of the tops 1980mm - both tops adjustable THICKNESSING MACHINE: - max. thickness of the processed element on the thicknesser 200mm - cover for the thicknesser shaft *from above: - pawls - input shaft, pulling, toothed - pressure - planing shaft - pressure - output shaft, pulling, smooth - adjustable rollers in the lower top - 4 types of feed speeds - diameter of the extraction nozzle 100mm Dqz0Xj - main motor 3kw - feed motor 1.5kW - dimensions length/width/height 2050x820x1100mm - weight 841kg ADVANTAGES - Polish production - very good condition, used machine Net price: PLN 13,900 Net price: EUR 3,270 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2024, Functionality: fully functional, load capacity: 1,000 kg, 1000 kg load capacity complete set including hand and double foot remote control L0W8Hwmwo 3-axis welding rotary table, height adjustable with through hole 200mm Plate diameter 900mm with T-slots alternatively with screwed on solid perforated plate 2000 x 1000 x 200mm, thickness 20mm, hole pattern 100mm, diameter 28mm Height horizontal min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.1 rpm Inclination up to 135° Hand and double foot remote control with speed display very robust Price is without accessories, accessories with very reasonable surcharge Table top surcharge €1900 (only in conjunction with positioner)

Condition: excellent (used), CATALOGUE NUMBER 7404 TECHNICAL DATA - min. thickness of the processed element 16mm - max. thickness of the processed element 60mm - height to the table surface 920mm - 1.2kW motor Buemuqgk0I - voltage 400V - plate - guillotine - tape feed rollers - glue tank - 3 guide rollers (including the first pulling roller) - worktop 1600x670mm - dimensions length/width/height 1600x1400x1100mm - weight 170kg ADVANTAGES - Polish production - for gluing straight and rounded edges - used machine, very good condition Net price: PLN 5900 Net price: EUR 1370 depending on the price EUR 4.3 (Prices may change with higher fluctuations)

Condition: new, 3D perforated table 2000 x 1000 x 200mm, grid 100mm, plate thickness 28mm, hole diameter 20mm, Plan machined, very solid weight approx. 750 kg With table base L00Vomwxw Price is without accessories

Condition: good (used), load capacity: 3,000 kg, The drive for the rotation of the clamping plate, to which the part to be machined is part to be machined is attached is driven by a powerful combination of electric and oil-hydraulic drives. Lifting, lowering and tilting are performed by high-quality oil-hydraulic cylinders, oil-hydraulic cylinders. The main advantages of using the "Rotolift" are greater efficiency for the company and ergonomics for the operator. efficiency for the company and ergonomics for the user. This has a Doyevv This has a positive effect on the quality of workpiece processing and reduces costs. Compared to conventional positioning of workpieces with cranes, costly non-productive times are also costly non-productive times are also considerably reduced. Load capacity 3000 KG Horizontal height min. 720 mm Horizontal height max. 1570mm Height tilted to center min. 740mm Height tilted to center max. 1620mm Total length 2400mm Total width 930mm Disc diameter 1100mm Weight 1480 KG with many additional accessories Top condition

Condition: excellent (used), Welding turntable Heinrichsglück, hydraulic height adjustable 3000 Kg load capacity complete set with hand and double foot remote control Digital display, welding current transmission 600 Ampere Bq2Zokpsth Dimensions: Height min. horizontal 1000mm, max. 1850mm height tilted to center min. 780mm, max. 1630mm weight 2400 Kg Speed 0,025 - 1,2 rpm. Tilting range 135°. Technical documentation and electrical chips available