CNC press brake

Lotze

Condition: used, functionality: fully functional, Year of construction: 1985, operating hours: 27,150 h, machine/vehicle number: 2723007, control type: NC control, actuation type: hydraulic, working width: 3,000 mm, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, total length: 4,000 mm, total width: 2,500 mm, total height: 1,700 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, type plate available, This machine is still in use in the factory during the manufacturing process and is ready for demonstration immediately. Nodpfx Abozpzq Tszswi

Condition: ready for operation (used), Year of construction: 1992, Immediately available due to business closure: CNC press brake, Lotze Type 327 x 1500 KN Year of manufacture 1992 Cybelec DNC 70 control system Pressing force 150 tons Nwodpfx Aeznh Aysbzei Working length 3500 mm Controlled back gauge Reach 300 mm Stroke 300 mm Drive 15 kW Complete set of upper and lower tooling (prisms) Weight 12 tons Price: EUR 6,000.00 plus VAT, ex works.

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Nwedpfxjzly Euo Abzei Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: used, sheet width 2000 mm plate thickness 3,5 mm distance between columns 2050 mm daylight opening 355 mm Nwsdpfxey Aa Igj Abzsi weight of the machine ca. 2,8 t dimensions of the machine ca. 3,5 x 1,5 x 1,5 m Bending machine - Bending angle preselection via limit switches

Condition: good (used), Geared motor, electric motor, electric geared motor, crane motor, crane drive -Manufacturer: HELIN, geared motor from Lotze HDZK swivel bending machine -Type: DKH 12.5a-4 -Speed: approx. 340 rpm Nwodsip Eqyspfx Abzji -Motor: 2.2 kW / 1400 rpm -Voltage: 220/380 V -Shaft: Ø 33 x 40 mm -Dimensions: 750/410/H295 mm -Weight: 135 kg

Condition: good (used), Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm Nedpfx Absip Eq Dszewi -Total weight: 5,6 kg

Condition: used, Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine Nwodpfx Abjcn Rd Rezei -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Condition: good (used), Gear motor, electric motor, electric gear motor, crane motor, crane drive -Manufacturer: DEMAG, gear motor from folding machine Lotze HDZK -Type: 24/14K4 -Speed: approx. 60 rpm Nwedpfx Asip Eraebzoi -Shaft: Ø 45 x 70 mm -Motor: 5 kW / 1420 rpm -Voltage: 220/380V -Dimensions: 980/400/H410 mm -Weight: 255kg

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm Nwjdpfx Aboip Eqkezsi -Total weight: 29.4 kg

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm Nsdsvc Amtopfx Abzjwi control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *