90° Driven curved roller conveyor 80 cm

90°

Condition: good (used), machine/vehicle number: 1984, Year of construction: 2011, load capacity: 9,000 kg, lifting height: 4,040 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 4,140 mm, total width: 2,050 mm, operation weight: 11,900 kg, additional equipment features: Manual sliding cabin, Warning triangle, Battery indicator, Equipment: lighting, Kalmar ECF90-6 from Uniktruck Wheel type – Drive wheel: Supersoft Wheel type – Steering wheel: Supersoft Wheel size – Drive wheel: 8.25 x 15 Wheel size – Steering wheel: 8.25 x 15 Ndjdpfxoyuhihj Aqcec

Condition: used, power: 90 kW (122.37 HP), nominal power: 90 kW (122.37 HP), rotational speed (min.): 1,480 rpm, rotational speed (max.): 1,480 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 156 A, type of input current: three-phase, overall weight: 692 kg, total length: 1,035 mm, total width: 557 mm, total height: 695 mm, torque: 580 Nm, type of cooling: air, protection type (IP code): IP55, No. 10040 Three-phase motor Simotop / Techtop T3CR 280M-4 / 90 kW / 1480 rpm Unused, in new condition According to our customer / the previous owner, the machine is fully functional and can be viewed on site Three-phase asynchronous motor Output 90 kW at 50 Hz 4-pole, speed 1480 rpm Voltage Δ/Y 380/660 V or 420/720 V at 50 Hz Rated current 156.1/89.9 A or 141.3/82.4 A Power factor cos φ 0.92 Rated torque approx. 580 Nm Can be operated in delta on a 400 V supply, therefore suitable for star-delta starting Also suitable for 60 Hz 90 kW at 400/690 V and 1770 rpm 108 kW at 480/830 V and 1780 rpm Efficiency class IE3, efficiency 95.2% Protection class IP55 Insulation class F Duty type S1 continuous operation Cooling method IC411, totally enclosed fan-cooled (TEFC) Nodps Afbxgofx Aqcodc PTC thermistors for winding protection IEC standard motor, frame size 280M, shaft height 280 mm Mounting type IM B3, foot-mounted with bolted-on feet Foot hole spacing 457 x 419 mm, 4 holes Ø 24 mm Shaft end Ø 75 x 140 mm with 20 mm key Grey cast iron housing, colour RAL 7024 graphite grey Ball bearings SKF 6316 ZZ C3 on both ends Terminal box on top, cable entries 2x M50x1.5 and 1x M16x1.5 Motor dimensions approx. 1035 x 557 x 695 mm LWH Transport dimensions approx. 1200 x 800 x 900 mm LWH Weight approx. 692 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM Ndedpez A Dxkefx Aqcjc A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000 Preference will be given to the sale of the complete production line, but individual machines and components can also be offered separately upon request.

Condition: like new (used), Year of construction: 2021, OMAG AFFRI WIKI 90 JS-C – Automatic Vickers/Knoop Hardness Tester | 2021 | Excellent Condition Nedpfjzkpptox Aqcjdc For sale is a professional, automatic OMAG AFFRI WIKI 90 JS-C hardness tester from the renowned Italian manufacturer, AFFRI. The unit is from 2021, is fully functional, complete, and ready for operation. This hardness tester is designed for precise hardness measurements of materials in quality control laboratories, research and development departments, and manufacturing plants. It is equipped with a digital measuring system with a camera and a computer with dedicated software that enables automatic analysis of indentations. Technical Specifications * Manufacturer: OMAG AFFRI (Italy) * Model: WIKI 90 JS-C * Year of manufacture: 2021 * Condition: very good, fully functional * Power supply: 115–230 V * Weight: approx. 70 kg * Made in: Italy Equipment * Control computer with software, * Digital measuring system with camera, * XY measuring table, * Complete cabling, * Emergency stop switch, * Ready for immediate operation. Application The device is ideally suited for hardness measurements using the following methods: * Vickers (HV), * Knoop (HK), * (depending on the configuration, also other measurement methods). Ideal for laboratories, the automotive and aerospace industries, toolmaking, and quality control. Please send a specific price offer.

Condition: good (used), Year of construction: 2005, Denius modular container, type 840-k-x T 90 -2 External dimensions WxLxH 2965x8550x2910 mm Clear internal width 2650 mm Clear internal depth 8240 mm Clear internal height 250 mm Catchment volume 2800 l Permissible load per compartment 1000 kg/m³ Weight approx. 7400 kg Fire-resistant steel door, 2000x2000 mm, on the end face Inside, Bito shelving systems with a load capacity of 135 kg per shelf are installed. Complete with technical documentation and plans. Nodpfxo Ad Uxws Aqcedc

Condition: used, Year of construction: 1974, Wohlenberg 90 High-Speed Cutter Cutting width: 900 mm Njdpfx Aqs Ad I Swecsdc Robust industrial machine in a heavy-duty cast iron design for paper, cardboard, and printed materials Available January 27

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) Nsdpfxj Ad H Udo Aqcedc FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Manufacturer: Alliance Ndjdpfx Ae Ad Eyfjqcoc Size: 320/90 R46 Type: Row Corp Radial Quantity: 2 Condition: like new DOT: 0322

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Work Table Ndedpfe Ad Aqnex Aqcsc Table dimensions: 1,100 x 260 mm Number of T-slots: 3 Travel Ranges Travel range X-axis: approx. 500 mm Travel range Y-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm Spindle Speed range: 1,000–5,000 min⁻¹ MACHINE DETAILS General Manufacturer: Dormac Type: FU90 Machine number: 537 Year of manufacture: 1987 Electrical Connection Operating voltage: 380 V Frequency: 50 Hz Dimensions and Weight Length: 1,500 mm Width: 1,500 mm Height: 1,800 mm Weight: 1,000 kg EQUIPMENT 3-axis digital display ACU-RITE

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2427908, power: 0.4 kW (0.54 HP), load capacity: 240 kg, lifting height: 3,600 mm, platform length: 1,290 mm, platform width: 700 mm, overall weight: 880 kg, transport length: 1,440 mm, transport width: 760 mm, transport height: 2,030 mm, fuel type: electric, color: red, Equipment: UVV, Technical data Year of manufacture: 2020 Working height: 5.90 m Platform height: 3.90 m Platform extension: 0.60 m Load capacity: 240 kg Load capacity when extended: 100 kg Max. persons: 2 Platform dimensions (L x W): 1.29 m x 0.70 m Overall dimensions (L x W x H): 1.44 m x 0.76 m x 2.03 m Max. gradeability: 25% Travel speed: 0.5 km/h - 4 km/h Drive unit: 24 V / 0.4 kW Lifting unit: 24 V / 1.2 kW Total weight: 880 kg All-wheel drive Njdpjywg Ddefx Aqcsdc General condition, fully functional