Shreddershafts Arjes TITAN

ARJES 950 Arjes 900

Year of construction: 2013, condition: good (used), Used progressing cavity pump Manufacturer Netzsch Type: NM063BY04S18B Machine number: 459933 Year of construction: 2013 Output: 3.50 // 18 m3/h Giodjillx Dopfx Aa Iol Speed: 91/288 min1/rpm Pressure: 16 // 0.10 bar Are you looking for a specific pump? We have other used pumps in stock - please ask us.

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Godsur Ravopfx Aa Ioil Tip: HL 4010 Li Year of construction: 2013 The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Power supply unit missing

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Gjdpfx Aewxmb Eea Ieil Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: used, Technical data IFE cascade screens (vibrating waste screens): Manufacturer IFE Aufbereitungstechnik GmbH, Austria Type SM 2400 x 5000 F - UW30 Year of construction 2009 Drive motor 22 kW Rated current 43 A Screen dimensions overall 5,000 x 2,400 mm (l x w) Dimensions of individual sieve segment 950 x 800 x 130 mm (l x w x d) Screen hole grid 150 x 125 mm Length of screen fingers (steel tubes in front of the screen segments) 400 mm Swing width max. 18.5 mm Weight approx. 6,600 kg Possible applications: The waste screen is suitable for use in plants for sorting household waste, commercial and industrial waste, paper and cardboard, scrap metal and electrical waste. Blockage-free screening with the most difficult feed materials, with high throughput capacity, no pigtail formation with oversize particles, loosened oversize particle discharge over the entire screen width and no downtimes for screen cleaning are the greatest advantages of this plant technology. Godpfeu Tg Rrsx Aa Ioil Remark: The screen plates / screen segments have been covered with steel plates without a screening function over the course of time for use in the paper sorting system. The steel plates are only attached and can be removed again. Remarks on the overall layout: Technical documentation for the machine is only available in German. An inspection of the machine is possible by arrangement. We do not accept any liability for the technical data or any errors.

Year of construction: 2011, condition: good (used), Plant: PEMO pump, sludge pump, chamber filter press feeding pump Type: S-ATMAO/AB/DCB75 Series: AO/AB Year of construction: 2011 Gjdpfxei Ezhbs Aa Ioil HP: 22/50 Engine: Cantoni Power: 37kW Speed: 2951 rpm Machine number: 3102 Dimensions: L 1200mm Application: Designed for very abrasive and/or acidic slurry applications. Delivery volume: from 1 to 1500 m3/h / depending on the medium

Condition: new, Year of construction: 2025, Rotary Blades Model: WEIMA, GROSS, VECOPLAN Type: WL, WLK, GAZ, VAZ Year of Manufacture: 2025 New / Ready for immediate use 1. Blade 40x40x25 M12 (PC) 2. Blade 40x40x25 M12 (KR) 3. Blade 40x40x25 M14 (KR) 4. Blade 40x40x20 M12 (KR) 5. Blade 40x40x16 M10 (KR) We manufacture replacement blades and spare parts for crushers and shredders. Gisdsxw Nrbopfx Aa Ijl Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, SHAFTS DEDICATED FOR ARJES 950 / TYTAN MACHINES IN ALL AVAILABLE CONFIGURATIONS. NOW ALSO AVAILABLE WITH CASSETTE OPTION. - STEEL SHAFTS WITH TWO TYPES OF RINGS - BETONWELLE SHAFTS - PADDLE SHAFTS WITH TWO DESIGNS - STAR SHAFTS PROTECHNIKA is a company with 21 years of history, specializing since its inception in the production of spare parts and complete recycling lines. In recent years, we have expanded our product range to include the manufacturing of grinding shafts for slow-speed shredders. Thanks to the implementation of automated welding processes and in-house production technology, we have minimized lead times while maintaining consistently high quality. Grinding shafts are produced in series, allowing us, among other benefits, to collaborate with machinery manufacturers as OEM suppliers. What makes PROTECHNIKA stand out from the competition? The answer is straightforward! Godpfx Aaox Hhd De Ioil - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 certified welders - ISO 9001:2015 - ISO 14001 - Independent design department capable of fulfilling any customer requirement - Own RESEARCH & DEVELOPMENT CENTER Customer relations are our highest priority, as their satisfaction is our success!

Condition: new, Year of construction: 2025, Rotary Blades Model: LINDNER Type: MICROMAT Year of Manufacture: 2025 New / Ready for Use 1. Blade 43x43x20 2pcs (KR) 2. Blade 43x43x20 2pcs (K8) 3. Blade 43x43x23 1pc (KR) 4. Blade 43x43x23 2pcs (K8) Godpfjxn Nyasx Aa Ieil We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.