RHOSS FreeCooling refrigeration system

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X386H03015, Year of construction: 2017, operating hours: 3,379 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, mast type: triplex, Equipment: sideshift, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lift height: 4,625 mm Overall height: 2,121 mm Free lift: 1,519 mm Hodeyvuwcopfx Afpek MACHINE DETAILS Mast: Triplex Drive: Electric Battery voltage: 48 V Battery capacity: 625 Ah Battery condition: Very good performance measured at 57.7 V Operating hours: 3,379 h EQUIPMENT Former Linde full-service unit Service valid until 11/2026 UVV inspection valid until 11/2026 3rd + 4th hydraulic valve Sideshift All dimensions are approximate. No liability is assumed for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site at your own risk. Collection ONLY with payment confirmation email! Collection WITHOUT prior notice Monday to Friday, 7:00–16:30. A mast that is too high for transport can be dismantled upon request. If collection is not made within the agreed period, a storage fee of €20 per machine per day will be charged (payment must be made before collection).

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, grinding length: 630 mm, grinding diameter: 320 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. grinding length: 630 mm Max. grinding diameter: 320 mm MACHINE DETAILS Manufacturer: TOS HOSTIVAR Model: BHU 32 Year of manufacture: 1987 Hsdpfxoyvf S No Afpjk

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, spindle speed (max.): 3,000 rpm, quill stroke: 150 mm, controller model: Siemens 802 C, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 500 mm Turning diameter over cross slide: 280 mm Turning length: 1,500 mm X-axis travel: 295 mm Z-axis travel: 1,435 mm Spindle bore: 82 mm Spindle speed: 20 – 3,000 rpm Longitudinal feed: 5,000 mm/min Cross feed: 5,000 mm/min Rapid traverse longitudinal: 5 m/min Rapid traverse cross: 5 m/min Quill stroke: 150 mm Bed width: 350 mm MACHINE DETAILS Control: Siemens 802 C Hedpfx Afjyuymfjpek Main motor: 7.5 kW Dimensions & Weight Footprint: approx. 3.23 x 1.47 x 1.73 m Machine weight: approx. 3 t

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 180 mm, workpiece width (max.): 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Unit 1 Unit: Combined roller/pad Material: Rubber Unit 2 Unit: Vertical pad MACHINE DETAILS Hsdpjyttyvefx Afpsk Motor power: 1.2 kW EQUIPMENT Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, edge thickness (max.): 20 mm, controller model: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hot melt adhesive tank, pre-press for hot melt adhesive Hedpfoyttrxjx Afpok Edge bonding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sanding machine (1 motor) Unit 7: Belt sanding machine (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed tracks: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination location. External reference: 6561

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, controller model: POWERCONTROL, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade projection: 125 mm Maximum feed speed: 80 m/min Saw Unit Maximum tool diameter: 450 mm Motor power: 13.5 kW Engraving Unit Maximum tool diameter: 180 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Hodpfsyttqzex Afpek Processing table Number of lift table levels: 4 Number of clamping devices: 10 The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External Reference: 5552

Condition: not inspected (used), functionality: unexamined, power: 55 kW (74.78 HP), Year of construction: 2010, rotational speed (max.): 2,965 rpm, TECHNICAL DETAILS Engine speed: 2,965 rpm Maximum working pressure: 8.5 bar Air dryer Model: ABT 102 compressed air dryer Max. working pressure: 21 bar MACHINE DETAILS Hsdpfx Afjyttk Iopek Control model: HMI PLC KAESER Motor power: 55 kW Operating voltage: 400/460 V The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes full responsibility for the installation, securing, and use of the machine at the destination. External reference: 7548

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, power: 19 kW (25.83 HP), travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,730 mm, number of spindles: 20, number of tool stations in tool turret 1: 18, TECHNICAL DETAILS Hjdpsyttf Sofx Afpsk Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling (X-direction): 2 Number of spindles for horizontal drilling (Y-direction): 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied based on availability (left side only). The machine is sold and delivered in its actual and legal condition (‘as seen and approved’), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods prior to collection, and assumes responsibility for installation, safety, and use of the machine at the destination. External reference: 6906

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Hodjyttcwopfx Afpek Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for installation, securing, and usage of the machine at the destination. External reference: 7350

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, number of spindles: 21, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Number of tool positions: 10 MACHINE DETAILS Total power: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Hsdpeytr Rysfx Afpsk Note: Cones and milling cutters are not included in the scope of delivery. Safety fences will be supplied subject to availability (right side missing). The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8174