Vibratory feeder for fruit

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 820 mm, controller model: Siemens 840 D, table load: 4,200 kg, spindle speed (max.): 18,000 rpm, Submitting a bid commits you to collecting the item by July 27, 2026! TECHNICAL DETAILS Travel range, X-axis: 3,600 mm Travel range, Y-axis: 900 mm Travel range, Z-axis: 820 mm B-axis: -100 to +100 degrees Spindle speed max.: 18,000 rpm Taper: HSK-A63 Power: 0.8 - 25 kW Tool magazine: 30 slots Tool weight max.: 6 kg Tool length max.: 250 mm Tool diameter max.: 100 mm Tool diameter with empty secondary position max.: 130 mm Total weight of all tools max.: 180 kg Rapid traverse (X-axis): 100 m/min Rapid traverse Y/Z-axis: 60 m/min Feed rate X/Y/Z max.: 20,000 mm/min Table size: 4,200 x 900 mm Table load: 4,200 kg T-slots: 9 with a center distance of 100 mm MACHINE DETAILS Control system: Siemens 840 D Total power requirement: 92 kW Dimensions & Weight Machine dimensions: 4.6 x 8.7 x 3.3 m Machine weight: 30 t Operating hours (according to the latest service report) Hsdpfjzkapkjx Ahzsfi Operating hours: 71,371 h Spindle hours: 22,527 h Number of shifts: 2 EQUIPMENT 5-axis machining with NC swivel milling head (B-axis) Linear drive in the X-axis

Year of construction: 2013, condition: used, functionality: fully functional, Tomra Halo 1500 (Titan 60") for sale. Hjdpsx A Ebpefx Ahzjfi The machine is currently in use in a potatoe packhouse in Germany and will become available June/July 2026. Prior delivery, the machine will undergo a service and througough cleaning in our workshop, including the replacement of broken fingers, infeed conveyor as well as the hedgehog band.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P21120N03100, Year of construction: 2024, operating hours: 696 h, load capacity: 1,000 kg, lifting height: 6,510 mm, free lift: 2,157 mm, mast type: triplex, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 1,000 kg Lifting height: 6,510 mm Overall height: 2,824 mm Free lift: 2,157 mm Fork profile: 80 mm x 40 mm Fork length: 1,200 mm Fork lowering stop: 30 mm Hjdozh Hgqspfx Ahzjfi MACHINE DETAILS Mast type: Full free-lift triplex mast Chassis width: 1,270 mm Load wheel polyurethane: 285 mm x 100 mm Drive wheel polyurethane: 360 mm x 130 mm Unladen weight: 2,433 kg Rated drive power: 6.5 kW Operating hours: 696 h EQUIPMENT Single-pedal control Color monitor Comfortable, air-suspended fabric seat Air-suspended and height-adjustable comfort driver's seat with fabric covering and innovative automatic weight adjustment for optimal suspension travel

Condition: ready for operation (used), Year of construction: 2021, operating hours: 288 h, functionality: fully functional, total height: 2,100 mm, total width: 1,200 mm, total length: 4,400 mm, overall weight: 1,800 kg, production capacity: 1,350 unit/h, No minimum price – guaranteed sale to the highest bidder! Automatic, linear, electro-pneumatic counter-pressure filling and capping system + rinser, infeed conveyor, and automatic labeling machine from the manufacturer ENOS! The machine is being sold due to a changeover to aluminum cans. The system is fully operational and has been internally maintained according to the manufacturer's instructions. Note: The seller will handle the dismantling of the machine. The buyer is only responsible for loading the machine for transport. Hsdozh Dtbepfx Ahzefi TECHNICAL DETAILS Production capacity: 1,350 units/hour Bottle format: 33cl long neck, crown cap 26mm With the same diameter of 60.4 mm, various bottles are possible (automatic height adjustment) MACHINE DETAILS Usage: 282,000 bottles filled Operating time: 288 filling hours Input voltage: 400 V Operating pressure: 8 bar Input frequency: 50 Hz Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,200 x 2,100 mm Total weight: 1,800 kg EQUIPMENT Rinser Infeed conveyor Automatic labeling machine

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Műszaki adatok: Kapacitás: 900 L Anyagminőség: WNr. 1.4301, AISI 304 Rozsdamentes acél Méret: 2050x750x1100 mm Súly: 100 kg Csatlakozók száma: 2 db Csatlakozók típusa: DN25 hollander Szintjelzővel Úszófedéllel A blokk alkalmas a bérmunka során a különböző ügyfelek léhozamát külön tartályokba gyűjteni, majd a tartályok tartalma külön-külön pasztőrözhető/továbbítható megszakítás nélkül. Nem igényel karbantartást. Specifications: Capacity: 900 L Material: WNr. 1.4301, AISI 304 stainless steel Dimensions: 2050x750x1100 mm Weight: 100 kg Number of connection: 2 db Connections: DN 25 With level indicator Floating top type The block is available to handle other clients’ juices separately, and can be pasteurized separately without a brake. No need for maintenance. Technische Daten: - Kapazität: 900 L - Material: Wnr. 1.4301, AISI 304 Edelstahl - Abmessungen: 2050x750x1100 mm - Gewicht: 100 kg - Anschlüsse: 2 St. - Typ des Anschlusses: DN 25 - Mit Schwimmdeckel - Mit Füllstandsanzeige - Erfordert keine Wartung Der Block ist geeignet, den Saft verschiedener Kunden während des Kontraktierens in getrennten Tanks zu sammeln, und der Inhalt der Tanks kann dann ohne Unterbrechung getrennt pasteurisiert/umgeladen werden. Hedjiu Hzmepfx Ahzofi

Year of construction: 2022, operating hours: 141 h, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, saw blade diameter: 180 mm, milling spindle speed (max.): 20,000 rpm, machine/vehicle number: 122000029, Machine with only 141 operating hours! TECHNICAL DETAILS Travel range X-axis: 4,176 mm Travel range Y-axis: 1,040 mm Travel range Z-axis: 540 mm Traverse speed X-axis: max. 120 m/min Traverse speed Y-axis: max. 60 m/min Traverse speed Z-axis: max. 30 m/min Machining length without end-face machining: max. 3,851 mm Machining length with end-face machining: max. 3,525 mm Maximum bar diameter: 180 mm Tool storage locations in the automatic magazine: 12 Disc cutter diameter: 120 mm Saw blade diameter: 180 mm Tool length: max. 150 mm Milling spindle speed: max. 20,000 rpm Milling spindle power: 7 kW S1 (water-cooled) Tool holder: HSK-F63 MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current consumption: 20 A Short-circuit resistance (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Dimensions & Weight Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm Weight: 3,800 kg Hfedpfx Ahozgfvbjzsi EQUIPMENT Automatic tool changer eluCam software Autonomous clamping jaw movement Premium clamping jaw with linear guide A-axis, infinitely adjustable from -120° to +120° C-axis, infinitely adjustable from -220° to +220° Note: Further technical details regarding the machine can be found in the attached document.

Condition: not inspected (used), Year of construction: 2006, operating hours: 28,200 h, functionality: unexamined, machine/vehicle number: R2EU3804, turning length: 310 mm, turning diameter: 220 mm, rotational speed (max.): 6,300 rpm, controller model: Siemens 810 DC powerline, Submitting a bid obligates you to collect the item on time, on July 30, 2026, at 1:00 PM! Technical data: ● Control system: Siemens 810 DC powerline ● Operating hours approx.: 28,200 ● Spindle hours approx.: 6,950 ● C-AXIS & POWERED TOOLS ● Tool holder: VDI 30 ● Number of tool positions in the turret: 12 (6 of which are powered) ● Max. bar diameter approx.: 45 mm ● Max. distance between centers approx.: 687 mm ● Max. spindle speed approx.: 6300 RPM ● Internal coolant line through the turret ● Chip conveyor ● Parts catcher ● 400 V / 50 Hz / 17 kVA ● Further technical data - see images Hodpfxjzlfcrj Ahzefi Scope of delivery: ● Existing manuals, chip conveyor, collet chuck ● The tool holders are not included in the scope of delivery! Dimensions & weights: ● Installation dimensions L x W x H approx.: 3700 x 2000 x 2200 mm ● Weight approx.: 3500 kg

Condition: used, The machine is ready for operation Hodpfx Asxn Up Hshzsfi

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 0294898, functionality: fully functional, operating hours: 20,000 h, pressing force: 100 t, ram plate length: 3,300 mm, total length: 3,800 mm, total height: 2,500 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Pressing force: 100 t Stroke length: 3,300 mm Hodpjzhlntjfx Ahzofi MACHINE DETAILS Operating hours: approx. 20,000 h Dimensions & Weight Machine dimensions (L x W x H): 3,800 x 2,000 x 2,500 mm Machine weight: 8,000 kg EQUIPMENT Tools

Condition: ready for operation (used), functionality: fully functional, working width: 1,500 mm, punching force: 28 t, workpiece weight (max.): 200 kg, sheet thickness (max.): 4 mm, working length: 3,000 mm, TECHNICAL DETAILS Maximum punching force: 280 kN Working area: 1,500 x 3,000 mm Hfjdpfx Aozliviohzei Maximum sheet metal thickness: 4 mm Maximum workpiece weight: 200 kg MACHINE DETAILS Machine weight: 15,800 kg

Condition: new, functionality: fully functional, Depending on the vessel shape, 120–240 l/h can be pasteurized. A wide range of bottle types can be utilized (milk bottles, beer bottles, preserving jars, and more). The desired product temperature and holding time can be set electronically from 0 to 99 minutes. The display is easy to read and user-friendly. Water capacity: ~230 l Weight: 185 kg (empty weight) Height: 1,090 mm (working height) Width: 705 mm Length: 1,880 mm Electrical protection: 16 A Electrical connection: 400V 50Hz (3-phase) Electrical power: 20.15 kW Hfedow Aw R Ejpfx Ahzsi Nominal capacity: up to 240 l/h

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, distance between stands: 1,350 mm, installation height: 600 mm, TECHNICAL DETAILS Press force: 250 t Frame width: 1,350 mm Stroke: 400 mm Installation height: 600 mm Table dimensions: 1,250 x 800 mm Side clearance: 640 mm Hedpozk E A Asfx Ahzofi Table height: 800 mm MACHINE DETAILS Dimensions & Weight Approximate space requirement: 3,600 x 2,800 x 5,700 mm Approximate machine weight: 36,000 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 130 t, stroke length: 250 mm, controller model: Cybelec, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Pressing force: 130 t Hfedozk E Aispfx Ahzji Bending length: 3,550 mm Frame width: 3,050 mm Stroke: 250 mm MACHINE DETAILS Control system: Cybelec Dimensions & Weight Footprint: 4,000 x 2,000 x 3,000 mm Machine weight: 11,600 kg

Condition: used, functionality: fully functional, Its operation is entirely mechanical, 1.75 kW for a great energy saving. It pits 280 peaches per minute, no matter how ripe and of any varieties either cling or freestone. Entirely automatic and continuous operation system. Hfjdpewnxkwefx Ahzsi The peaches, discharged by the feeder and positioned into the alveolus of plates composing the belt, are set in the correct cutting position, then cut by precutting blades and pitted by special knives at a rate of 40 strokes/minute. They fall on the vibrator which separates them from their stones.

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: A10587, functionality: fully functional, pressing force: 80 t, stroke length: 200 mm, throat depth: 250 mm, controller model: Cybelec DNC 30, distance between stands: 2,050 mm, TECHNICAL DETAILS Pressing force: 80 t Bending length: 2,550 mm Frame width: 2,050 mm Table width: 240 mm Hodpfozk E Acox Ahzefi Maximum stroke: 200 mm Overhang: 250 mm Installation height: 450 mm Stroke speed - downwards, unloaded: 100 mm/s Stroke speed - pressing, loaded: 12 mm/s Stroke speed - upwards, unloaded: 105 mm/s MACHINE DETAILS Control system: Cybelec DNC 30 Oil capacity: 250 l Machine weight, approx.: 8,000 kg