FLOTTWEG belt press for fruits and vegetables

Condition: new, Year of construction: 2018, functionality: fully functional, turning length: 3,060 mm, turning diameter: 494 mm, spindle speed (max.): 2,000 rpm, overall weight: 17,500 kg, controller model: Fanuc 0i-TD, An unused CNC lathe is for sale! TECHNICAL DETAILS Maximum turning diameter: 800 mm Turning diameter: 494 mm Maximum turning length: 3,060 mm Spindle speed max.: 2,000 rpm Bar capacity: 115 mm X-axis travel: 300 + 20 mm Z-axis travel: 3,100 mm Chuck: 15″ Spindle nose: A2-11 Tool stations: 12 Boring bar diameter: 50 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Tailstock diameter: 110 mm Tailstock taper: MK 5 Incline: 45° MACHINE DETAILS Control model: FANUC 0i-T C-axis: Duplomatic VDI60 Spindle motor power: 30 kW Motor power X-axis: 4 kW Motor power Z-axis: 7 kW Electrical connection: 55 kVA Hsdpfoz Ar Rkjx Anyju Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,120 x 2,310 mm Machine weight: approx. 17,500 kg EQUIPMENT Linear scale on the X-axis Hydraulic steady rest SMW SLUB-5 D50-D310 Tool presetter Renishaw HPMA Warning light Chip conveyor High-pressure pump (10 bar)

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. Hedpfsv Sq S Njx Anyju The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 10 h, cutting height (max.): 510 mm, cutting width (max.): 510 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, controller model: Siemens SIMATIC S7-1200, For sale is a brand new, unused semi-automatic band saw! The machine is sold with a six-month warranty! Hodpfxjz Aq Nfo Anyou TECHNICAL DETAILS Cutting height: 510 mm Cutting width: 510 mm Speed range: 20 – 80 RPM Speed infinitely adjustable Band saw width: 54 mm Band saw thickness: 1.6 mm Swivel range: 90 ° Table height: 810 mm MACHINE DETAILS Control model: Siemens SIMATIC S7-1200 Control type: PLC-controlled Operating mode: semi-automatic Main drive power: 7.5 kW Power: 10.20 hp Hydraulic feed Planetary gearbox Input voltage: 400 V Input frequency: 50 Hz Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 1,200 x 3,200 x 3,000 mm Total weight: 4,500 kg EQUIPMENT Heavy-duty double-column construction CE marking Documentation / Manual Lighting Motor brake Further technical data and information can be found in the attached documents.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, spindle bore: 40 mm, turning diameter over bed slide: 330 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, overall weight: 700 kg, TECHNICAL DETAILS Hsdpfx Anjzz Rm Ieyju Center distance: 635 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 210 mm Swinging diameter in the gap: 480 mm Toolmaker's accuracy: DIN 8605 Main spindle bore: 40 mm Spindle mount: DIN 55029 D1-4 Speed steps: 12 Speed range: 40–2,500 rpm Taper in tailstock: MK 3 Tailstock quill travel: 110 mm Longitudinal feeds: 0.03–2 mm/rev Cross feeds: 0.015–1 mm/rev Metric threads: 0.2–14 mm Whitworth threads: 2–56 threads per 1" MACHINE DETAILS Drive power: 2.2 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,000 × 1,400 mm Weight approx.: 700 kg EQUIPMENT 2-axis digital read-out ACU-RITE® DRO 203 Quick-change tool holder MULTIFIX Chip collection tray with front opening flap Adjustable tool holder guard Rear splash and chip guard Chuck guard Spindle cover Removable bridge Coolant system Work area lighting Threading dial Foot brake with brake pedal over the entire length Operating manual with CE declaration of conformity

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Hsdpov Srgujfx Anyou Height: 2270 mm Weight: 150 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C9000052, Year of construction: 2019, operating hours: 1,483 h, lifting height: 13,800 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, documentation/manual, The current UVV inspection report is attached! The UVV certification is valid until 10/2027! Maintenance and servicing have always been carried out according to the manufacturer's intervals. TECHNICAL DETAILS Load capacity: 3.8 t Lifting height: 13,800 mm Fork length: 1,200 mm MACHINE DETAILS Drive: Diesel Tire condition Condition of front right tire: Approx. 80% Condition of front left tire: Approx. 80% Condition of rear right tire: Approx. 80% Condition of rear left tire: Approx. 80% Operating hours: 1,483 h Hedszzxv Dspfx Anyeu EQUIPMENT UVV inspection valid until 10/2027 Fork carriage Seat cover Spare key Documents Side shift Supports Leveling system

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25-210182, load capacity: 12 kg, repeat accuracy: 0.08 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 12 kg Repeatability: ± 0.08 mm Power consumption: 1.5 kVA Working range, main axes S-axis (rotation): -170° to +170° L-axis (forearm): -90° to +155° U-axis (upper arm): -175° to +240° Hedpoz Ephijfx Anyju Working range, wrist axes R-axis (wrist rotation): -180° to +180° B-axis (wrist swivel/flexion): -135° to +135° T-axis (wrist rotation): -360° to +360° MACHINE DETAILS Controller Type: FS100 Dimensions (H x W x D): 470 x 200 x 420 mm Cooling system: Indirect cooling Interfaces: USB 2.0, RS-232C, LAN (100 Base-TX / 10 Base-T) Dimensions Dimensions (L x W x H): 2,500 x 2,000 x 2,373 mm Footprint: 5,000 x 3,000 mm Operating voltage: 3 x 400 V, 50 Hz Control voltage: 24 V DC Power consumption: max. 1.5 kVA EQUIPMENT Drawer module Transfer and centering module Interchangeable 2-point double gripper, standard

Year of construction: 2026, condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools. The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone wipers. Thanks to this innovative solution, the system can be operated for the economical production of fruit and vegetable juice. You don’t need a high-pressure cleaner, so you save on electricity costs when pressing. All you need is a compressor with 8-bar pressure and a ½" water connection. • Fully automatic and infinitely variable belt speed control • Easy to clean Hjdpfev Sq Nbox Anyou • Easier maintenance • Rolling machine feet • Automatic belt correction Technical Information Rated output: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power consumption: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Air Operating pressure: 6 bar approx. 50 l/h Dimensions: Length: 1,080 mm Width: 1,070 mm Height: 1,320 mm Weight: 297 kg Optional: automatic juice draining

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Hedpfoz Epg Esx Anyju Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Work area, fixed table Work area, X-axis: 925 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 1,400 × 750 mm Work area, rotary table Work area, X-axis: 780 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 800 × 630 mm Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 50–12,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle: Kessler motor spindle EQUIPMENT 6th axis prepared Handheld control unit Internal cooling system with filter system Filter system: 500 l Chip conveyor Blum laser 2 extraction systems Machine hood

Condition: used, machine/vehicle number: H2X386V04481, Year of construction: 2019, load capacity: 1,800 kg, lifting height: 6,075 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 6,075 mm Load capacity: 1,800 kg Fork length: 1,200 mm Hedez Dfruopfx Anysu MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery type: 5 PzS Battery voltage: 48 V Battery capacity: 625 Ah Battery year of manufacture: 2023 Battery idle voltage: 50.4 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT Former Linde full-service unit: Full free lift Hydraulically adjustable forks Facelift model with tilt angle display 3rd and 4th hydraulic valve Fork positioner with side shifter Semi-cabin with windshield wiper Lateral fall protection, easily removable White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals for road approval Comfort seat with lumbar support and seat heating High-quality Hawker battery charger All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible for truck heights of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior arrangement from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 680

Year of construction: 2025, condition: new, In order to empty of fruit and vegetables of wood or plastic boxes in a washing machine, on a sorting conveyor or a bain-marie. The outlet amount from the box can be regulated about an infinitely variable hydraulic tilting equipment. Hjdpfxecl Tx Dj Anyeu The filling of the bin tipper is possible by means of heave stacker or hand elevating platform truck. Standard implementation: Lifting force: up to 550 kg / box Impulse engine power / elektr. Connection: 2. 2 kW/; 240 V, 3 phases, 60 hertz Weight: 350 kg Mass: 1680x1420x1255mm Sputum width: 500 mm Duration wheel process: 15sec.

Condition: used, machine/vehicle number: H2X386V04690, Year of construction: 2019, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 6,075 mm Load capacity: 1,800 kg Fork length: 1,200 mm Hjdpfoz Dfrnex Anyou MACHINE DETAILS Mast type: Triplex mast Drive type: Electric Battery voltage: 48 V Battery capacity: 625 Ah Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage in idle state: 50.9 V Operating hours: 18,678 h Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT Former Linde full-service unit 3rd valve and 4th valve Side shifter Fork positioner Full free lift Hydraulically adjustable forks Facelift model with tilt angle indicator Half cab Windscreen wiper Lateral fall protection, easily removable White non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals for road approval Comfort seat with lumbar support Seat heating High-quality Hawker battery charger All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 651

Condition: used, machine/vehicle number: 516329G00447, Year of construction: 2016, operating hours: 11,358 h, load capacity: 5,000 kg, lifting height: 5,400 mm, mast type: triplex, fork length: 2,300 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 5,400 mm Fork length: 2,300 mm MACHINE DETAILS Hodpez Dfrbsfx Anyju Mast type: Triplex Drive type: Electric Battery voltage: 80 V Battery capacity: 840 Ah Battery year of manufacture: 2017 Battery voltage at rest: 85.3 V Service valid until: 07/2027 UVV (Industrial Safety Regulation) valid until: 07/2027 Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,350 x 3,000 mm Own weight: 8,300 kg Operating hours according to display: 11,358 h EQUIPMENT Full free lift 3rd and 4th hydraulic valve Side shifter Hydraulic fork positioner Full cabin with heater and windshield wiper LED work light front LED work light rear Road traffic lighting with turn signals Safety light rear Comfort seat with lumbar support and seat heating Hawker Enersys battery charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift truck on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 558

Condition: like new (used), SACOME Industrial Juice Processing Line – Stainless Steel SACOME industrial line for the processing and treatment of juices, nectars, and liquid beverages, designed to integrate different operations for the preparation, circulation, and thermal treatment of the product within a continuous system. The unit incorporates process tanks, heat exchangers, sanitary pumps, piping, valves, and instrumentation, mounted on a common stainless-steel structure with an upper access platform. The system allows the product to be conditioned under controlled parameters before being sent to the next stages of production or packaging. MAIN FEATURES -Manufacturer: SACOME -Type: Industrial juice processing line -Application: juices, nectars, and liquid beverages -Continuous processing system -Process tanks in stainless steel -Product circulation and recirculation system -Tubular heat exchangers -Indirect thermal treatment -Sanitary product pumps -Process piping and valves -Pressure and temperature instrumentation -Process condition control -Circuits for thermal services -Construction primarily in stainless steel -Upper operation and maintenance platform -Self-supporting industrial structure -Hygienic design for the food industry -Integrable with preparation, homogenization, and filling systems Hjdpeynkgcofx Anyou PROCESS The previously prepared product is introduced into the SACOME line and circulates via sanitary pumps through the different process equipment. The heat exchange system allows the product to be heated indirectly, keeping the product and the service fluid separate. Depending on the operating configuration, different stages of heating, thermal maintenance, and subsequent cooling can be performed. The temperature control and installed instrumentation allow the established conditions to be maintained during the treatment. The product that does not reach the required parameters can, depending on the circuit configuration, be recirculated to go through the process again. Once treated, the product can be sent to a storage tank, homogenizer, or directly to the corresponding filling line. APPLICATIONS Especially suitable for manufacturers of juices, nectars, fruit beverages, and other liquid food products that require an industrial system for thermal treatment and product conditioning. Depending on the characteristics of the heat exchangers and the installed configuration, it can work with: -Fruit juices -Vegetable juices -Nectars -Beverages with pulp -Liquid purees -Fruit bases -Formulated beverages -Other compatible liquid or semi-liquid products The line can be integrated with mixing systems, homogenizers, buffer tanks, CIP systems, and filling equipment to form a complete beverage production system. Machine available for inspection. Additional technical information, capacities, process temperatures, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, machine/vehicle number: 516329X00173, Year of construction: 2020, operating hours: 992 h, load capacity: 5,000 kg, lifting height: 4,950 mm, mast type: triplex, fork length: 2,400 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 4,950 mm Fork length: 2,400 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery voltage: 80 V Battery capacity: 930 Ah Battery voltage at rest: 83.1 V Dimensions & Weight Dimensions (L x W x H): 5,500 x 1,400 x 2,500 mm Own weight: 7,400 kg Service valid until: 04/2027 UVV (Occupational Safety) valid until: 04/2027 Operating hours according to display: 992 h EQUIPMENT Former Still full-service unit 3rd and 4th hydraulic valve; fork positioner with side shifter Full free lift Hydraulically adjustable forks Full cabin with plastic doors Windshield wiper Non-marking white tires LED work light, front LED work light, rear Orange warning light Safety light, front Comfort seat with lumbar support Charger: Hawker Enersys Hodpfxjz Dfq Re Anyju All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible at a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notice from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine and day will be charged for non-timely collection. Outstanding storage fees must be paid in full before collection. Lot number: 535