Industrial warehouse trolley

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,503 h, load capacity: 6,000 kg, lifting height: 3,400 mm, fuel type: diesel, construction height: 2,880 mm, empty load weight: 11,250 kg, TECHNICAL DETAILS Load capacity: 6,000 kg Lifting height: 3,400 mm Overall height: 2,880 mm MACHINE DETAILS Fuel type: Diesel Front tire size: 355/65-15 Rear tire size: 250-15 Dimensions & Weight Overall length: 3,450 mm Unladen weight: 11,250 kg Operating hours: 6,503 h EQUIPMENT Gijdpfx Asza Dn Rjdhou Cabin 3rd valve Front work lights Rear work lights Heater Full cabin CE certificate

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 6,892 h, load capacity: 5,000 kg, lifting height: 3,500 mm, construction height: 2,570 mm, empty load weight: 8,244 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 3,500 mm Overall height: 2,570 mm MACHINE DETAILS Fuel type: electric Giodpfx Adsza Dnwjhou Front tire size: 355/50 - 15 (25%) Rear tire size: 200/75 - 9 (25%) Dimensions & Weight Overall length: 3,050 mm Unladen weight: 8,244 kg Operating hours: 6,892 h EQUIPMENT Front PTO Cabin Air conditioning 3rd valve 4th valve Front work lights Rear work lights Heater Full cab Impulse control Side shifter Fork positioner

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 4,429 h, fuel type: electric, battery capacity: 620 Ah, battery voltage: 80 V, battery weight: 1,558 kg, TECHNICAL DETAILS Fuel type: electric Front tire size: 21x8-9 (50%) Rear tire size: 7.00-12 (70%) MACHINE DETAILS Battery Nominal voltage: 80 V Nominal energy: 47.1 kWh Giedpfx Adoza Dnkohou Nominal capacity: 620 Ah Weight: 1,558 kg Cell type: 4 TPzS 620 Operating hours: 4,429 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 16,765 h, load capacity: 8,000 kg, lifting height: 5,450 mm, fuel type: gas, mast type: triplex, construction height: 3,210 mm, TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 5,450 mm Overall height: 3,210 mm MACHINE DETAILS Fuel type: Gas Mast type: Triplex Dimensions & Weight Overall length: 3,800 mm Unladen weight: 14,485 kg Gijdpsza Dm Tofx Adhju Front tire size: 4 x 8.25-15 (80%) Rear tire size: 315/70-15 (80%) Operating hours: 16,765 h EQUIPMENT Front PTO shaft Cabin 3rd valve 4th valve Front work lights Rear work lights Heater Full cabin Triple clamp Side shifter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 72,700 h, machine/vehicle number: A1220A1012, laser hours: 34,021 h, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, working length: 3,000 mm, working width: 1,500 mm, Laser cutting system + LiftMaster + 4 Stopa storage towers No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control system: Sinumerik 840D SL Working area: 3,000 x 1,500 x 115 mm Speed: max. 140 m/min Accuracy: 0.1 mm Laser: CO2 laser TruFlow 5000 with optimized standby mode Laser power: 5000 W Sheet thickness, steel: max. 25 mm Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 12 mm STOPA storage system with 4 towers Year of manufacture: 2006 Load capacity: 3 t Sheet format: 1,250 x 2,500 mm Storage capacity: 63 t Storage height: 3,800 mm Storage locations: 21 MACHINE DETAILS Operating hours: 72,700 / 34,021 h Length: 9,300 mm Width: 4,600 mm Height: 2,200 mm Weight: 12,000 kg Voltage: 400 V 50 Hz Connected load: 105 kVA EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Position laser diode Spray system PierceLine FocusLine NitroLine PlasmaLine ControlLine ContourLine FastLine FlyLine AdjustLine Microweld Production plan Fast re-production Automatic shutdown Low-maintenance turbo radial fan Laser control TASC Laser cutting head with 250 mm lens Universal cutting head quick-change system (UTI) with bus connection LensLine with condition monitoring CE marking Light curtains Multi-chamber extraction system Gjdjy U Nf Sepfx Adhsiu Laser monitoring system Compact dust extraction system

Condition: ready for operation (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC 530 , rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 780 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm B-axis, infinitely adjustable: 150° (-120°/+30°) Rapid traverse rate (X / Y / Z): 50 m/min Feed rate: 20 - 15,000 mm/min Spindle speed (max.): 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool interface: SK 40 Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool positions: 120 Max. tool diameter: 80 mm Max. tool diameter with free adjacent tool pocket: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Total power consumption: 64.2 kVA Dimensions & Weight Footprint: approx. 7.0 x 7.0 x 2.8 m Machine weight: approx. 12.0 t Gisdpozcqa Sofx Adhju Operating Hours Operating hours: 39,256 h Power-on hours: 72,107 h EQUIPMENT Chip conveyor Coolant system High-pressure cooling 40 bar through-spindle coolant Paper band filter Pallet changer, 2 positions Tool breakage monitoring According to the seller, the spindle was presumably replaced. However, no service report is available to confirm this. The machine's data storage was renewed in January 2026. No CE declaration of conformity is available in DIN A4 or PDF format.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1800005039, travel distance X-axis: 360 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 240 mm, controller model: NUM 1050, swivel angle B-axis (max.): 120 °, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with grinding and eroding functions. The machine was refurbished in 2016. The latest service report for the machine is enclosed. Optionally, a variety of spare parts can also be purchased in addition to the machine. TECHNICAL DETAILS Travel range X-axis: 360 mm Travel range Y-axis: 240 mm Travel range Z-axis: 240 mm Swivel axis B: ±120° Resolution transverse axis X: 0.0001 mm Resolution feed axis Z: 0.0001 mm Resolution vertical axis Y: 0.0001 mm Resolution swivel axis B: 0.0001° Rapid traverse transverse axis X: 10 m/min Rapid traverse feed axis Z: 10 m/min Rapid traverse vertical axis Y: 10 m/min Rapid traverse swivel axis B: 6,500°/min MACHINE DETAILS Control: NUM 1050 Connection power without robot: 13 kVA Compressed air supply: 6 bar Compressed air connection diameter: 11 mm Operating hours (according to counter): 4,550 h Gjdpezb Dtpofx Adheiu EQUIPMENT Electrostatic filter system Documentation Note: The machine has contamination (oil stain) on the glass level gauge. Therefore, a complete on-site test is currently not possible.

Condition: used, Year of construction: 2003, operating hours: 23,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller model: OSP-E100M, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time by the end of week 26 of 2026! TECHNICAL DETAILS Travel in X-axis: 1,000 mm Travel in Y-axis: 950 mm Travel in Z-axis: 1,000 mm Main spindle speed: 12,000 rpm Table width: 630 mm Table height: 630 mm NCB B-axis: 0.001 degrees MACHINE DETAILS Control system: OSP-E100M Dimensions (L x W x H): 6,500 x 3,460 x 3,280 mm Operating hours: approx. 23,000 h EQUIPMENT 2 APC pallet changing systems 100 ATC tool changer SK50 with tool ID Coolant system Mayfran Consept Renishaw preparation (receiver) Tool breakage monitoring installed in the magazine (special development) An optional tool package with 230 tools is available for the machine for €5,000. The seller can offer dismantling, transport securing, removal and loading for an additional charge of €7,850. Giedpszbamfefx Adhju

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JUN7856, Year of construction: 2006, operating hours: 22,198 h, load capacity: 7,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, empty load weight: 10,850 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 7,000 kg Lifting height: 4,000 mm Platform: 1,400 mm MACHINE DETAILS Mast type: Simplex Drive type: Diesel Own weight: 10,850 kg ISO class: ISO Class 4 = 5,000 - 10,000 kg EQUIPMENT Heater Gjdpfjza Ub Uex Adheiu Full cabin External reference: SL8371SP

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,501 h, load capacity: 230 kg, fuel type: electric, battery voltage: 24 V, working height: 12,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 230 kg Working height: 12,000 mm MACHINE DETAILS Fuel type: electric Battery voltage: 24 V Gisdpfoza Ubnjx Adheu External reference: SL16691SLO