Sharpener Sharpener for band saws

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,670 mm, mast type: triplex, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 2,000 kg Mast type: Triplex Overall height: 2,240 mm Lift height: 5,000 mm Free lift: 1,670 mm Forks: 1,200 mm MACHINE DETAILS Total weight: 3,630 kg Battery: 48 V 6 EPzS 690 Ah Charger: Hawker digital D: 48/80 EQUIPMENT Double auxiliary hydraulics Integrated side shifter Load guard Front windscreen 2x front working lights Fork extension 1,800 x 120 x 40 mm Fjdpjzaqtgjfx Accegc

Condition: ready for operation (used), Year of construction: 2021, input voltage: 230 V, laser power: 30 W, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 30 W Voltage: 230 V Frequency: 50/60 Hz Fgsdpfxjzaqk Se Accec EQUIPMENT Rulers in mm Atmos Cube Rayjet 230 V Beige extraction connection cable 9po Cutting table MM and inches 8015 Power cable 20A Wooden packaging Note: Accessories are sold as is, without warranty. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller model: FANUC 160is-MB, spindle speed (max.): 12,000 rpm, Submitting a bid obligates you to collect the item within the timeframe of calendar week 29 (July 13 - July 19, 2026)! TECHNICAL DETAILS Travel in X-axis: 560 mm Travel in Y-axis: 510 mm Travel in Z-axis: 560 mm Table length: 400 mm Table width: 400 mm Spindle and Feed Fgedpfjy Uy H Hox Accjc Distance between spindle nose and table: 150 - 710 mm Spindle speed: stepless Spindle speed from: 100 rpm Spindle speed to: 12,000 rpm Maximum torque: 150 Nm Working feed rate: 1 - 40 m/min Rapid traverse rate: 40 m/min Workpiece data Max. workpiece length: 620 mm Max. workpiece width: 620 mm Max. workpiece height: 700 mm Max. workpiece weight on the table: 400 kg Pallet changer Pallet station: 2 pallets Number of pallets: 8 Tool magazine Number of tool positions: 60 Tool diameter: 82 mm Diameter with available adjacent positions: 140 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool change time: 1 s Average chip-to-chip time: 3.4 s Tool holder: ISO 40 MACHINE DETAILS Control: FANUC 160is-MB Coolant system: 400 l Coolant through the spindle (IKZ): 20 bar Dimensions (L x W x H): 2,100 x 3,955 x 2,844 mm EQUIPMENT Chip conveyor NC rotary table Coolant/mist extraction Status indicator

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12952*19912, Year of construction: 2020, This forklift is a returned leasing vehicle. The technical data correspond to the information listed on the original invoice. The seller assumes no liability for this information. TECHNICAL DETAILS Lifting height: 19,065 mm Overall height: 10,490–19,710 mm Side shift: ±600 mm Tilt compensation: ±6° Mechanical height compensation: 200 mm Load center: 1,220 mm Turning radius: 6,000 mm Fjdpfxsy T Ed Is Accjgc MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Drive system Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW Torque: 1,175 Nm Engine speed: 1,600 rpm Displacement: 7.7 l Cylinders: 6 Emission standard: EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 Track width: 4,600 mm Hydraulic system Filtration: 10 µm Accumulator pressure: 60 bar Accumulator volume: 2 l Electrical system System voltage: 24 V Cabin Cabin length: 1,605 mm Cabin width: 1,480 mm Cabin height: 1,620 mm Connection: 24 V / 10 A Tyres Tyre type: 14.00 x 24" PR: 24 EQUIPMENT Box-frame chassis Bolted tanks Mudguards Crane lifting eyes Turbo-II air filter Wheel nut protection HLL filter Oil tank preheating LED lighting Reversing alarm Beacon light MD4 touch display Drive login system Cab ventilation Interior rearview mirror Clothes hook Side mirrors Air horn USB port Central lubrication system Reversing camera Fire extinguisher Anti-slip strips Cabin protection frame

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Lifting capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CAN bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Clamping range: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Lifting capacity: 6,000 kg Double clamp bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in a robust and clean welded construction Splayed clamp arms mounted rotatably With hydraulic cylinders, required valves, pipes, and fittings Fgodpfx Asy T Edheccsc Including oil pressure manometer and connection hoses to the rotator Additionally: one pressure gauge mounted 180° opposed to the standard manometer LIFTING ARM & EXTENSION TECHNICAL DETAILS Extension: 1.6–2.1 m Lifting capacity: 8,000 kg at an outreach of 1.6–2.1 m EQUIPMENT 1 piece forklift lifting arm, twin beam, with endless rotator and pendulum suspension Including connection hoses to forklift 1 piece hydraulic extension with telescopic cylinder 1 stabilizer (2 pcs) for pendulum motion compensation Integrated side shifter in slide guides, travel: 250 mm RADIO PRESSURE MONITORING (Clamping Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC system: Electronic control with 7" touch screen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior mirrors on fender (high) Turbo II heavy-duty air filter Additional hydraulic functions Quick couplings on the fork carriage Accumulator/vibration damper 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heating Additional LED headlights, 2 × on the mast Reversing alarm LED beacon Electrical cables over the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with RPM increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Movable A4 writing pad LED reading lamp Diesel parking heater + engine water heater Sun visor (roof/front) Panorama rearview mirror Preparation for attachments from other manufacturers Central lubrication base, 14 points

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Fodpfx Acjy T Eb Tecogc Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, controller model: FANUC Series 31i-MODEL B, TECHNICAL DETAILS Turning length: 1,020 mm Turning diameter: 540 mm Swinging diameter over the machine bed: 750 mm Swinging diameter over the top slide: 540 mm Swinging diameter over the cross slide: 270 mm Travel range X-axis: 565 mm Travel range Y-axis: 170 mm Travel range Z-axis: 1,050 mm Rapid traverse rate X-axis: 36 m/min Rapid traverse rate Y-axis: 26 m/min Rapid traverse rate Z-axis: 36 m/min Power of the spindle motor: 22 W Spindle speed main spindle (max.): 5,000 rpm Spindle bore: 76 mm Spindle speed milling spindle (max.): 12,000 rpm Bar passage: 76 mm Bar diameter (max.): 65 mm Spindle nose: A2#6 Spindle diameter: 110 mm MACHINE DETAILS Control system: FANUC Series 31i-MODEL B Chuck outer diameter: 210 mm Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,525 x 2,805 mm Total weight: 12,000 kg Operating hours: 8,977 h Fgjdpfx Acey Tw Ulocsc EQUIPMENT Documentation/Manual

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026! The machine has the following configuration: Grooving cutter head 1802 Motor power: 2 x 2.0 kW Fgodpfx Acsy Tw Edocec 1. Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for grooving cutter head 2. Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for grooving cutter head Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Storage compartment for 14 cartridges (1.4 kg) GluJet collection container Pressure unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function cutter head 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile cutter head 1833 MOT4 1. Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2. Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Carbide indexable inserts for scraping blade holder R = 2 mm (2 pcs. required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - touch probe vertical top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Fagor 8055/FL, spindle speed (max.): 1,200 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 850 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 450 mm Spindle speed (max.): 1,200 rpm Spindle speed (min.): 30 rpm Table width: 530 mm Table length: 900 mm T-slots: 14 mm wide, spaced at 60 mm Fgedpfx Asy Tv Aujccoc Table load capacity: max. 400 kg MACHINE DETAILS Control system: Fagor 8055/FL Input voltage: 380 V Input current: Three-phase Connected power: 56 kW EQUIPMENT Documentation/Manual Various tool holders and tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,889 h, laser power: 2,000 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been very well maintained, regularly cleaned, and serviced. It is in like-new condition! TECHNICAL DETAILS Laser power: 2,000 W Laser source manufacturer: IPG Laser type: Fiber laser Sheet metal thickness max.: 15 mm Sheet metal thickness steel max.: 15 mm Sheet metal thickness stainless steel max.: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Automation level: Automatic Fgsdpfx Acoy Tvzkocsc Chuck type: Electric Input voltage: 380 V Input current type: Three-phase Laser operating hours: 8,212 h Cutting hours: 1,657 h Year of last overhaul: 2024 EQUIPMENT CE marking Documentation/Manual Safety light curtain Rotary table Extraction system