Diesel tank 10.000 liter Diesel pump

Year of construction

2005

Condition

Used

Location

Warstein

Machine data

Machine type:: Diesel tank 10.000 liter Diesel pump

Year of construction:: 2005

Condition:: used

Price & Location

Location:: Enkerbruch 2, 59581 Warstein, Deutschland

Call

Details about the offer

Listing ID:: A246-5053

Update:: 23.05.2024

Description

Tank-& Umweltschutz Wozniack specialized company according to the Water Resources Act

Dear Sir or Madam, we offer a 10,000 liter double-walled storage tank for the storage of diesel as follows . Nominal capacity 10 cbm

Piece 1

used but reconditioned, i.e. the tank is cleaned, refurbished, primed and painted

Color equipment lacquer RAL ; . However, you can always bring your own color wishes.

Material steel in steel, material S235JRG2

Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate
Fodpscnik Sofx Ad Negb

Piece. 1 Dipstick

Piece. 1 venting piece

piece. 1 Filling nozzle

piece. 1 new limit switch

piece. 1 new leak detection sighting device with filled up leak liquid

piece. 1 ladder

piece. 1 suction line

Form . cylindrical storage tank with feet/console

tank mass length ca 5.300 mm plus diesel pump 500 mm

diameter approx. 1.600 mm

Weight approx. 2,000 kg

Storage above ground

Compact diesel dispenser Vision 60 (new) Hose length 4 mtr . On request also longer .

Approved automatic nozzle .

Pump 230 Volt max 55 Ltr/min. on request also in 70Liter min.

All our tank systems can also be offered without diesel pump .

Top in the offer . Liquid fertilizer - AHL tank plants in the size of 10,000-100,000 liters.

Of course, you can also design your tank plant!

All our plants are designed in our company by selected employees

extensively controlled and checked.

We also offer an inexpensive delivery on request.

The inspection of our plants is possible at any time.

Further tank facilities for above ground as well as underground storage are available in all sizes and are for sale on our premises.

Price/ Shipping

The price for the filling station is valid from the location Warstein , free loaded.

Delivery can be offered at a reasonable price for an additional charge.

Delivery time = immediately

You will receive an invoice with VAT.

In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle and transport them away.

With kind regards
from Warstein
Tank Environmental Protection Wozniack

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2015

36 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

Hydraulic press for rubber and EVA foams MAPELLI T 1000

Greece

9,364 km

Hydraulic press for rubber and EVA foams
MAPELLIT 1000

€9,000

To the auction

Condition: ready for operation (used), Year of construction: 1983, operating hours: 50,000 h, functionality: fully functional, operating pressure: 200 bar, overall weight: 33,000 kg, pressing force: 1,000 t, stroke length: 650 mm, travel speed (max.): 3,600 mm/min, TECHNICAL DETAILS Pressing force: 1,000 t Clamping force of the core plates: 30 t Travel speed: approx. 60 mm/s Operating pressure: 200 bar Stroke of the movable plate: 650 mm Fgodpfx Asy Hhqded Nob Stroke of the mold holder plate (towards operator): 980 mm Heating Plates and Heating System Heating plate size: 1,000 mm x 1,000 mm Number of heating plates: 7 Number of openings: 6 Opening dimension per opening: approx. 108 mm Specific pressure on plates: 100 kg/cm² Hydraulics and Power Units Hydraulic pump power: 9 kW Oil dynamic pump power: 11 kW Installed electrical power: 21.5 kW Hydraulic oil capacity: approx. 160 l Operating Fluids Amount of hydraulic fluid emulsified with water and 5% CIL-SOLIOIL-BK oil: approx. 1,300 l Nitrogen bottles (each 60 l at 200 atm) for accumulator pre-charging: approx. 10 MACHINE DETAILS Weights Weight of the press: 33 t Weight of hydraulic power unit: 0.4 t Weight of pump and accumulator: 1.9 t Weight of electrical unit: 0.2 t Total delivery weight: 35.5 t FEATURES Heating system with saturated steam Electrohydraulic power control device Electrovalve air venting system

See details

Auction

CNC turning and milling center Gildemeister CTX 510

Nordrhein-Westfalen

7,686 km

CNC turning and milling center
GildemeisterCTX 510

€14,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, chuck outer diameter: 325 mm, controller model: Fanuk Series 21I-TB, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter over cross slide: 350 mm Max. turning diameter: 465 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. spindle speed: 3,500 rpm Max. torque: 630 Nm Spindle bearing diameter: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Quill stroke: 150 mm Rapid traverse X/Z axis: 30 m/min Number of tool turret positions: 12 Tool holder: VDI 40 MACHINE DETAILS Control: Fanuk Series 21I-TB Fgodpfey Hg S Hsx Ad Neb Drive power: 33 kW

See details

Auction

Vertical machining center POSMill C 800 Kompakt

Baden-Württemberg

8,028 km

Vertical machining center
POSMillC 800 Kompakt

€24,000

To the auction

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 10,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Traverse path X-axis: 800 mm Traverse path Y-axis: 520 mm Traverse path Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Tool changer: 24-position Table size: 950 x 520 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Weight: 6,800 kg Operating Hours Machine on-time: approx. 47,000 h Program run time: approx. 5,700 h Fgedoy E Hqtspfx Ad Njb Spindle: approx. 4,800 h EQUIPMENT IKZ (internal coolant supply) Hexagon probe Note: NC clamps and tool holders are not included in the offer.

See details

Auction

CNC turning and milling center MORI SEIKI NT 4200/1000S

Schleswig-Holstein

7,710 km

CNC turning and milling center
MORI SEIKINT 4200/1000S

€30,000

To the auction

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm Fodoy Eydyepfx Ad Njgb MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

See details

Auction

Multi-component injection moulding machines ENGEL VICTORY 1350H500V/220 Combi

Wien

8,409 km

Multi-component injection moulding machines
ENGELVICTORY 1350H500V/220 Combi

€12,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fjdey Exdxopfx Ad Nogb Clamping force: 220 t Screw diameter: 55 mm + 40 mm Maximum injection volume: 618 cm³ + 251 cm³ MACHINE DETAILS Mounting platen: 960 x 830 mm Minimum mold installation height: 320 mm Maximum mold installation height: 730 mm EQUIPMENT EC100/A03 Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced costs for disassembly and loading.

See details

Auction

Multi-material injection molding machine KraussMaffei KM200-1000-390 CZ

Wien

8,409 km

Multi-material injection molding machine
KraussMaffeiKM200-1000-390 CZ

€6,900

To the auction

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, clamping force: 1,961 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 200 t Tie bar spacing: 560 x 560 mm Screw diameter (first component): 60 mm Screw diameter (second component): 35 mm Shot weight (first component): 566 g Shot weight (second component): 178 g Fedpsy Exdlsfx Ad Njgb EQUIPMENT Two-component system Kraussmaffei Multinject system Note: When purchasing multiple items from the same location (see listings below), the lower costs for dismantling and loading will be waived.

See details

Auction

Multi-material injection molding machine ENGEL ES 330H80V/125 HL .2F

Wien

8,409 km

Multi-material injection molding machine
ENGELES 330H80V/125 HL .2F

€6,500

To the auction

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, clamping force: 1,225 kN, controller model: CC100, No minimum price – guaranteed sale to the highest bidder! Fgsdjy Exc Ijpfx Ad Nsb TECHNICAL DETAILS Clamping force: 125 t Horizontal cylinder: 35 Vertical cylinder: 18 MACHINE DETAILS Control: CC100 EQUIPMENT 1x hydraulic core pull BAP 1x proportional hydraulic interface for index plate BAP 16x heating zones (HK) 2x magnetic clamping plates for BAP and FAP Note: When purchasing multiple items from the same location (see offers below), you will benefit from the lowest costs for dismantling and loading.

See details

Auction

Multi-material injection molding machine ENGEL ES 650W500V/200HL. 2F

Wien

8,409 km

Multi-material injection molding machine
ENGELES 650W500V/200HL. 2F

€7,900

To the auction

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, screw diameter: 45 mm, clamping force: 2,000 kN, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nClamping unit: 2,000 kN\n\nScrew diameter unit 1: 45 mm\nScrew diameter unit 2: 45 mm\n\nMax. shot volume unit 1: 226 cm³\nMax. shot volume unit 2: 183 cm³\n\nMACHINE DETAILS\n\nMinimum mould installation size: 250 mm\nMaximum mould installation size: 750 mm\n\nEQUIPMENT\n2-component machine\nTie-bar-less design\n\nNote: When purchasing multiple items from the same location (see offers below), you will benefit from the most favourable disassembly and loading costs for each item. Fgodjy Exatopfx Ad Nsb

See details

Auction

Injection molding machine ENGEL Victory 330/125 Tech

Wien

8,409 km

Injection molding machine
ENGELVictory 330/125 Tech

€9,300

To the auction

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,225 kN, screw diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! Fgodoy Exagopfx Ad Nsb TECHNICAL DETAILS Clamping force: 125 t Screw diameter: 30 mm Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lowest applicable costs for dismantling and loading.

See details

Auction

Injection molding machine ENGEL ES 1800/300HL-V

Wien

8,409 km

Injection molding machine
ENGELES 1800/300HL-V

€14,000

To the auction

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,942 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, No minimum price – guaranteed sale to the highest bidder! Fodpfsy Ew U Aex Ad Negb Engel injection moulding machine including robot! TECHNICAL DETAILS Clamping force: 300 tons Screw diameter: 70 mm Max. shot volume: 1,039 cm³ EQUIPMENT 3x core pulls Robot Note: When purchasing multiple items from the same location (see offers below), the respective lower costs for dismantling and loading will be waived.

See details