Roll conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,670 mm, mast type: triplex, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 2,000 kg Mast type: Triplex Overall height: 2,240 mm Lift height: 5,000 mm Free lift: 1,670 mm Forks: 1,200 mm Dusdpjzaqtgjfx Abfsu MACHINE DETAILS Total weight: 3,630 kg Battery: 48 V 6 EPzS 690 Ah Charger: Hawker digital D: 48/80 EQUIPMENT Double auxiliary hydraulics Integrated side shifter Load guard Front windscreen 2x front working lights Fork extension 1,800 x 120 x 40 mm

Condition: ready for operation (used), Year of construction: 2021, input voltage: 230 V, laser power: 30 W, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 30 W Voltage: 230 V Frequency: 50/60 Hz EQUIPMENT Rulers in mm Atmos Cube Rayjet 230 V Beige extraction connection cable 9po Cutting table MM and inches 8015 Dedpfx Aozaqk Ssbfsuu Power cable 20A Wooden packaging Note: Accessories are sold as is, without warranty. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller model: FANUC 160is-MB, spindle speed (max.): 12,000 rpm, Submitting a bid obligates you to collect the item within the timeframe of calendar week 29 (July 13 - July 19, 2026)! TECHNICAL DETAILS Travel in X-axis: 560 mm Travel in Y-axis: 510 mm Travel in Z-axis: 560 mm Table length: 400 mm Table width: 400 mm Spindle and Feed Distance between spindle nose and table: 150 - 710 mm Spindle speed: stepless Spindle speed from: 100 rpm Spindle speed to: 12,000 rpm Maximum torque: 150 Nm Working feed rate: 1 - 40 m/min Rapid traverse rate: 40 m/min Workpiece data Max. workpiece length: 620 mm Max. workpiece width: 620 mm Max. workpiece height: 700 mm Max. workpiece weight on the table: 400 kg Pallet changer Pallet station: 2 pallets Number of pallets: 8 Tool magazine Number of tool positions: 60 Tool diameter: 82 mm Diameter with available adjacent positions: 140 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool change time: 1 s Average chip-to-chip time: 3.4 s Tool holder: ISO 40 MACHINE DETAILS Control: FANUC 160is-MB Coolant system: 400 l Coolant through the spindle (IKZ): 20 bar Dimensions (L x W x H): 2,100 x 3,955 x 2,844 mm Djdpfx Abjy Uy H Hefeuu EQUIPMENT Chip conveyor NC rotary table Coolant/mist extraction Status indicator

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12952*19912, Year of construction: 2020, This forklift is a returned leasing vehicle. The technical data correspond to the information listed on the original invoice. The seller assumes no liability for this information. TECHNICAL DETAILS Lifting height: 19,065 mm Overall height: 10,490–19,710 mm Side shift: ±600 mm Tilt compensation: ±6° Mechanical height compensation: 200 mm Load center: 1,220 mm Turning radius: 6,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Drive system Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW Torque: 1,175 Nm Engine speed: 1,600 rpm Displacement: 7.7 l Cylinders: 6 Emission standard: EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 Track width: 4,600 mm Hydraulic system Filtration: 10 µm Accumulator pressure: 60 bar Accumulator volume: 2 l Electrical system System voltage: 24 V Cabin Cabin length: 1,605 mm Cabin width: 1,480 mm Cabin height: 1,620 mm Connection: 24 V / 10 A Tyres Tyre type: 14.00 x 24" PR: 24 EQUIPMENT Box-frame chassis Bolted tanks Mudguards Crane lifting eyes Turbo-II air filter Wheel nut protection HLL filter Oil tank preheating LED lighting Reversing alarm Beacon light MD4 touch display Dusdpfxsy T Ed Is Abfsu Drive login system Cab ventilation Interior rearview mirror Clothes hook Side mirrors Air horn USB port Central lubrication system Reversing camera Fire extinguisher Anti-slip strips Cabin protection frame

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Lifting capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CAN bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Clamping range: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Lifting capacity: 6,000 kg Double clamp bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in a robust and clean welded construction Splayed clamp arms mounted rotatably With hydraulic cylinders, required valves, pipes, and fittings Including oil pressure manometer and connection hoses to the rotator Additionally: one pressure gauge mounted 180° opposed to the standard manometer LIFTING ARM & EXTENSION TECHNICAL DETAILS Extension: 1.6–2.1 m Lifting capacity: 8,000 kg at an outreach of 1.6–2.1 m EQUIPMENT 1 piece forklift lifting arm, twin beam, with endless rotator and pendulum suspension Including connection hoses to forklift 1 piece hydraulic extension with telescopic cylinder 1 stabilizer (2 pcs) for pendulum motion compensation Integrated side shifter in slide guides, travel: 250 mm RADIO PRESSURE MONITORING (Clamping Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC system: Electronic control with 7" touch screen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior mirrors on fender (high) Turbo II heavy-duty air filter Additional hydraulic functions Quick couplings on the fork carriage Accumulator/vibration damper 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heating Additional LED headlights, 2 × on the mast Reversing alarm LED beacon Electrical cables over the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with RPM increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Movable A4 writing pad LED reading lamp Diesel parking heater + engine water heater Sun visor (roof/front) Panorama rearview mirror Preparation for attachments from other manufacturers Central lubrication base, 14 points Dsdpfx Aey T Edhebfjuu

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Dodpfey T Eb Tox Abfsuu Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, controller model: FANUC Series 31i-MODEL B, TECHNICAL DETAILS Turning length: 1,020 mm Turning diameter: 540 mm Swinging diameter over the machine bed: 750 mm Swinging diameter over the top slide: 540 mm Swinging diameter over the cross slide: 270 mm Travel range X-axis: 565 mm Travel range Y-axis: 170 mm Travel range Z-axis: 1,050 mm Rapid traverse rate X-axis: 36 m/min Rapid traverse rate Y-axis: 26 m/min Dsdpfxey Tw Ulo Abfjuu Rapid traverse rate Z-axis: 36 m/min Power of the spindle motor: 22 W Spindle speed main spindle (max.): 5,000 rpm Spindle bore: 76 mm Spindle speed milling spindle (max.): 12,000 rpm Bar passage: 76 mm Bar diameter (max.): 65 mm Spindle nose: A2#6 Spindle diameter: 110 mm MACHINE DETAILS Control system: FANUC Series 31i-MODEL B Chuck outer diameter: 210 mm Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,525 x 2,805 mm Total weight: 12,000 kg Operating hours: 8,977 h EQUIPMENT Documentation/Manual

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026! The machine has the following configuration: Grooving cutter head 1802 Motor power: 2 x 2.0 kW 1. Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for grooving cutter head 2. Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for grooving cutter head Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Storage compartment for 14 cartridges (1.4 kg) GluJet collection container Pressure unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function cutter head 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Dedpfjy Tw Edex Abfouu Profile cutter head 1833 MOT4 1. Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2. Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Carbide indexable inserts for scraping blade holder R = 2 mm (2 pcs. required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - touch probe vertical top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Fagor 8055/FL, spindle speed (max.): 1,200 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Duodpfx Aoy Tv Aujbfsu Travel range, X-axis: 850 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 450 mm Spindle speed (max.): 1,200 rpm Spindle speed (min.): 30 rpm Table width: 530 mm Table length: 900 mm T-slots: 14 mm wide, spaced at 60 mm Table load capacity: max. 400 kg MACHINE DETAILS Control system: Fagor 8055/FL Input voltage: 380 V Input current: Three-phase Connected power: 56 kW EQUIPMENT Documentation/Manual Various tool holders and tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,889 h, laser power: 2,000 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been very well maintained, regularly cleaned, and serviced. It is in like-new condition! TECHNICAL DETAILS Laser power: 2,000 W Laser source manufacturer: IPG Laser type: Fiber laser Duodpfx Abjy Tvzkefju Sheet metal thickness max.: 15 mm Sheet metal thickness steel max.: 15 mm Sheet metal thickness stainless steel max.: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Automation level: Automatic Chuck type: Electric Input voltage: 380 V Input current type: Three-phase Laser operating hours: 8,212 h Cutting hours: 1,657 h Year of last overhaul: 2024 EQUIPMENT CE marking Documentation/Manual Safety light curtain Rotary table Extraction system