Briquetting press

R 200

Condition: like new (used), Year of construction: 1980, Technical details : Nail making plant consists : 1. Wafios N3 2. Wafios S75 3. Wafios S110 4. Vitari V14R 5. Vitari V17R 6. Moroni SPN 200 Dodpsit Rdwjfx Aqcech 7. Wafios Grinding machine MSD 500 8. Half automatic paking unit - 1-5 kg 9. Drum for cleaning and polishing nails - 2x400 kg/h Wire diameter - 1,2- 6,0 mm Nails lenght - 10 - 200 mm Capacity - 900 kg/h

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Dcodpfxsx Af Rds Aqcoh Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: ready for operation (used), Rexroth HDS04.2-W200N-HS79-01-FW MNR: R911279892 SN:277828-04386, used, normal signs of use, 100% functional, scope of delivery as per photos Dcodpfoi Ect Sox Aqcoh

Condition: ready for operation (used), Rexroth HDS04.2-W200N-HS79-01-FW MNR: R911279892 SN:277828-04389, used, normal signs of use, 100% functional, scope of delivery as per photos Dsdpfx Asi Ecuaoqcech

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. GROSS shredder Dcodex Tp U Rjpfx Aqcoh - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW - good condition - available immediately

Condition: ready for operation (used), Rexroth HNS02.1A-Q200-R0023-A-480-NNN MNR: R911315176 IndraDrive, SN 315176 B0196, used, normal signs of wear, 100% functional, scope of delivery according to photos Dcodpfx Aqsi Ecxpocjh

Condition: ready for operation (used), Rexroth HNS02.1A-Q200-R0023-A-480-NNNN MNR: R911315176 , SN 315176 B0205, used, strong signs of use, 100% functional, scope of delivery as per photos Dcedoi Ecxzopfx Aqcjh

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Dsdpfxsv Sqrpo Aqcsch Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: ready for operation (used), Rexroth HDS04.2-W200N-HS79-01-FW MNR: R911279892 SN:277828-04382, used, normal signs of use, 100% functional, scope of delivery as per photos Dcedpfx Asi Ect Ioqcsh

Condition: ready for operation (used), Rexroth HNS02.1A-Q200-R0023-A-480-NNN MNR: R911315176 IndraDrive, SN 315176 B0184, used, normal signs of wear, 100% functional, scope of delivery according to photos Dcsdpfxei Ecxtj Aqceh

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), Feed opening: 600 x 800 mm Hopper capacity: 0.6 m3 Dcodpfxjxru Hyo Aqcjh Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 blades, 30 x 30 mm Screen perforation: 15/20 mm or as required Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection rating: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Including: - Automatic star-delta start - Automatic shut-off in idle mode - Vibration-damping machine feet - CE-compliant - GS mark “dust-tested”

Condition: new, Year of construction: 2025, functionality: fully functional, Chipper heads for chipper canter sawmachine R200, 250 Djdpfxsx I Skdj Aqcech

Condition: reconditioned (used), functionality: fully functional, empty load weight: 2,400 kg, Compact sawing machine with mechanical centering infeed, el.motors 2x75 kW and 2x90 kW, machine can be equipped with edging block and electric-operating cabinet with frequency converters TECHNICAL DETAILS Top diameter: 80-230 mm Maximum log diameter: 350 mm Minimum log length: 2.4 m Cant height in Chipper Canter: 60-232 mm Dcodpfxoxfrmwe Aqceh Cant width in Chipper Canter: 70-210 mm Line speed: 70-150 m/min Chip length: 20-30 mm

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model Dedoutmw Hjpfx Aqcech H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Year of construction: 1999, condition: good (used), GALLUS R200 Letterpress Printing Machine Year: 1999 Web width: 200 mm Condition: used, available for inspection by appointment Location: Germany Availability: approximately August 2026 Technical configuration: 5 x letterpress printing units 1 x flexo unit, mainly used for varnishing UV drying system Cooling unit / chiller 1 x flat die-cutting station 3 x rotary die-cutting stations, with 2 anvil cylinders Laminating unit Option to print on the reverse side, but not onto the adhesive Matrix rewinder Standard rewinder for printed rolls Included tooling / accessories: 2 x change gears, 60 and 86 teeth 2 x cylinders including gear and spacer rings, 90 teeth 2 x cylinders including gear and spacer rings, 99 teeth 2 x cylinders including gear and spacer rings, 111 teeth Dcsdpfx Ajy Tyt Djqcjh 1 x cylinder including gear and spacer ring, 96 teeth 1 x cylinder including gear and spacer ring, 126 teeth Printing cylinder shafts for each printing unit Several UV lamps Various small parts 1 x right-hand printing unit, apparently refurbished