Multi-spindle drilling machine

Maggi Engineering Boring System 29

Condition: excellent (used), Year of construction: 2021, Maggi Boring System 29 Multi-Spindle Drilling Machine Number of spindles: 29 Speed: 2800 rpm Distance between first and last drill: 896 mm Noise level: 76.1 dB Number of pneumatic clamps: 2 Center distance between spindles: 32 mm Gbodpfxoxvctve Aa Isg Max drilling depth: 65 mm Air consumption: 10 l/cycle Weight: 370 kg Working pressure: 6–7 bar Motor power: 1.5 kW Max workpiece thickness: 70 mm Spiral System – device for rapid drilling depth adjustment CE certified Year of manufacture: 2021

Year of construction: 2007, condition: good (used), Twence has had a biomass powerplant since 2007 called BEC. The BEC converts biomass into green electricity, enough to provide a town like Hengelo with electricity. To achieve the goal of supplying heat from this plant a conversion was finalized January 2018. Due to this conversion they have been able to produce three times as much renewable energy from virtually the same amount of biomass as before the conversion. The conversion was made by changing out the steam turbine. The MAN MARC6 condensing steam turbine is unable to have a large amount of low-pressure steam continuously extracted and was therefore replaced. The MARC6 steam turbine has been decommissioned and preserved since January 2018. Openings in the roof can be used to remove the generator, gearbox and turbine from the building. The roof can be partially removed, creating a large enough opening for these elements to be lifted through. There is ample space for a crane in between the biomass powerplant and the waste-to-energy plant, if the steam pipe outside is removed. The turbine hall is equipped with a 16-ton overhead crane which can be used to lift specific parts from the Turbine-Generator set. Make MAN Turbo AG Type MARC6-C03 kW 21000,0 Year of manufacturing 2007 Nominal speed (1/min) 5955 Godpfxel Hydie Aa Isbg Trip speed (1/min) 6550 Live steam pressure (bara) 66 Live steam temperature (°C) 460 Bleeding pressure 1 (bara) 23,5 Bleeding pressure 2 (bara) 3,3 Bleeding pressure 3 (bara) 0,96 Nom. Exhaust pressure (bara) 0,079

Condition: excellent (used), Maggi Boring System 29 Multi-spindle Drill Number of spindles 29 Speed 2800 rpm Distance between first and last drill 896 mm Noise level 76.1 dB Gedpfxswclkts Aa Isbg Number of pneumatic clamps 4 Distance between the centers of individual spindles 32 mm Max drilling depth 65 mm Air consumption 10 l/cycle Weight 370 kg Working pressure 6 – 7 bar Motor power 1.5 kW Max element thickness 70 mm Spiral System - device for quick adjustment of drilling depth CE certificate

Year of construction: 2021, condition: excellent (used), Currently, the industrial line produces 2.2 to 2.5 tons per hour of high-quality pellets for heating from coniferous and deciduous wood. Waste material from other wood processing plants can also be used as raw material. Additionally, pellets can be produced from vegetable raw material for animal feed as an activity, as well as pellets from organic fertiliser for soil fertilisation. The company has been operating for 6 years and has two production lines. Godpfxjl Sny Aj Aa Isbg The equipment of one 1 ton/hour production has been in operation since 2013 and the second 2 ton/hour is new since 2019 and with proven production functionality.

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC Gbodpjiq U Tqefx Aa Ijg - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Godsl Sli Djpfx Aa Isbg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1000023523, Biesse Stream B MDS 2.0/15.0 is a single-sided edge banding center with automatic device with manual feeding to dimension and square panels in flexible way bу 4 run. Main technical data Сhаin advance speed: 10-25 m/min Panel length: 250-2700 mm Panel width: 120-1200 mm Panel thickness: 10-60 Panel weight: 75 kg Edge thickness: 0,3-3,0 mm Gbjdepz Shkepfx Aa Ijg Gluing unit: PU gluing kit, installed in place of to the standard device(EVA). The machine is equipped with a tool for processing edges with a radius R=1/1.5/2.0mm and a chamfer of 25 degrees. Technical condition: the machine is currently used in production.

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Gedpfxep U Umks Aa Iebg

Condition: new, Year of construction: 2022, Metal lathe 400V, fabr. ZMM - type C400TM/1000 The construction and design of this machine meet today's requirements for efficiency and ergonomics. The production technology, the adaptation of high-quality materials and standardized components from reputable and globally proven manufacturers, as well as continuous inspection, meet even the most demanding customer requirements. The machine is characterized by high technological, functional and operational performance, reliability and safety. Naturally, this machine complies with current European safety standards. Features of this lathe General: European top quality lathe The machine is equipped with automatic power supply Equipped with digital readout X-Y axis Bed: Heavy, strongly ribbed and rigid bed casting made of strong gray cast iron that prevents vibrations when the machine is properly leveled and operated. Double prismatic, inductively hardened and precision ground guideways Built-in gap bridge that can be removed for handling large workpieces. Headstock: The stable, well-ribbed and precision-machined headstock ensures non-vibrating and accurate operation while the lathe is processing parts at high speed or during heavy machining regime. The ground gears are made of induction-hardened hardened steel and operate in an oil bath. Gjdpfxjiy Nq Ho Aa Iebg The spindle is hardened, precision ground and balanced; it has a standard version of the hole and spindle face, including Cam lock performance, direct mounting of 3-jaw self-centering, 4-jaw independent chucks, chucks without chucks or mounting of the chucks with flange connector. The spindle bearings can use bearings from SKF, FAG, NSK with preload for mounting the bearing set. This bearing ensures high accuracy of machine work indefinitely. Lathe apron: Mechanized transverse and longitudinal movements. A built-in safety mechanism against overloading. A latch against simultaneous switching of the nut to spindle and automatic feed. Fast movements in both axes. Feed gearbox: When processing a particular part, the feed gearbox offers different feeds and steps for thread cutting - metric, inch, module and DP threads. It is designed so that operation is extremely convenient. Specifications Learn More Product Type-Turner Brand-ZMM Voltage-400V Center height-200 mm Turning diameter over bed-400 mm Turning diameter over support-235 mm Turning diameter over pocket-550 mm Bed width-320 mm Main spindle clearance-52 mm Distance between centers-750 - 1000 - 1500 Main spindle internal/external thread DIN 55027 - gr.6 Spindle speeds-50 - 2240 Motor power- [kW]4 kW Number of feeds-80 Feed range longitudinal-0.015 - 0.6 mm/rev Feed range cross-0,0075 - 0,3 mm/rev Number of thread cuts-40 Thread cutting metric-0,25 - 7,5 mm Whitworth thread-cutting-120 - 4 TPI Thread-cutting module-0,0625 - 1,875 module Thread cutting pitch-480 - 16 dP Transverse displacement support-235 mm Chisel displacement support-110 mm Pinole diameter-100 mm Loose head-MK 4 Weight-1700 kg Price is ex VAT!

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location. Gbedpfxsibikwj Aa Ieg