Bulk Feeder

ABK Sweden STR 301

Year of construction: 2021, condition: excellent (used), Currently, the industrial line produces 2.2 to 2.5 tons per hour of high-quality pellets for heating from coniferous and deciduous wood. Waste material from other wood processing plants can also be used as raw material. Additionally, pellets can be produced from vegetable raw material for animal feed as an activity, as well as pellets from organic fertiliser for soil fertilisation. The company has been operating for 6 years and has two production lines. The equipment of one 1 ton/hour production has been in operation since 2013 and the second 2 ton/hour is new since 2019 and with proven production functionality. Iedpfxsl Sny Aj Ahujtb

Year of construction: 2007, condition: good (used), Twence has had a biomass powerplant since 2007 called BEC. The BEC converts biomass into green electricity, enough to provide a town like Hengelo with electricity. To achieve the goal of supplying heat from this plant a conversion was finalized January 2018. Due to this conversion they have been able to produce three times as much renewable energy from virtually the same amount of biomass as before the conversion. The conversion was made by changing out the steam turbine. The MAN MARC6 condensing steam turbine is unable to have a large amount of low-pressure steam continuously extracted and was therefore replaced. The MARC6 steam turbine has been decommissioned and preserved since January 2018. Openings in the roof can be used to remove the generator, gearbox and turbine from the building. The roof can be partially removed, creating a large enough opening for these elements to be lifted through. There is ample space for a crane in between the biomass powerplant and the waste-to-energy plant, if the steam pipe outside is removed. The turbine hall is equipped with a 16-ton overhead crane which can be used to lift specific parts from the Turbine-Generator set. Make MAN Turbo AG Type MARC6-C03 kW 21000,0 Year of manufacturing 2007 Nominal speed (1/min) 5955 Trip speed (1/min) 6550 Live steam pressure (bara) 66 Live steam temperature (°C) 460 Bleeding pressure 1 (bara) 23,5 Bleeding pressure 2 (bara) 3,3 Isdpfx Ahol Hydijuetb Bleeding pressure 3 (bara) 0,96 Nom. Exhaust pressure (bara) 0,079

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Itodpfx Aheiq U Tqjueb Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Iedpfx Asl Sli Dshuetb

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Itodpfx Aop U Umkshueb

Condition: new, Year of construction: 2022, Metal lathe 400V, fabr. ZMM - type C400TM/1000 The construction and design of this machine meet today's requirements for efficiency and ergonomics. The production technology, the adaptation of high-quality materials and standardized components from reputable and globally proven manufacturers, as well as continuous inspection, meet even the most demanding customer requirements. The machine is characterized by high technological, functional and operational performance, reliability and safety. Naturally, this machine complies with current European safety standards. Features of this lathe General: European top quality lathe The machine is equipped with automatic power supply Equipped with digital readout X-Y axis Bed: Heavy, strongly ribbed and rigid bed casting made of strong gray cast iron that prevents vibrations when the machine is properly leveled and operated. Double prismatic, inductively hardened and precision ground guideways Built-in gap bridge that can be removed for handling large workpieces. Headstock: The stable, well-ribbed and precision-machined headstock ensures non-vibrating and accurate operation while the lathe is processing parts at high speed or during heavy machining regime. The ground gears are made of induction-hardened hardened steel and operate in an oil bath. The spindle is hardened, precision ground and balanced; it has a standard version of the hole and spindle face, including Cam lock performance, direct mounting of 3-jaw self-centering, 4-jaw independent chucks, chucks without chucks or mounting of the chucks with flange connector. The spindle bearings can use bearings from SKF, FAG, NSK with preload for mounting the bearing set. This bearing ensures high accuracy of machine work indefinitely. Lathe apron: Mechanized transverse and longitudinal movements. A built-in safety mechanism against overloading. A latch against simultaneous switching of the nut to spindle and automatic feed. Fast movements in both axes. Feed gearbox: Itsdpsiy Nq Hofx Ahusb When processing a particular part, the feed gearbox offers different feeds and steps for thread cutting - metric, inch, module and DP threads. It is designed so that operation is extremely convenient. Specifications Learn More Product Type-Turner Brand-ZMM Voltage-400V Center height-200 mm Turning diameter over bed-400 mm Turning diameter over support-235 mm Turning diameter over pocket-550 mm Bed width-320 mm Main spindle clearance-52 mm Distance between centers-750 - 1000 - 1500 Main spindle internal/external thread DIN 55027 - gr.6 Spindle speeds-50 - 2240 Motor power- [kW]4 kW Number of feeds-80 Feed range longitudinal-0.015 - 0.6 mm/rev Feed range cross-0,0075 - 0,3 mm/rev Number of thread cuts-40 Thread cutting metric-0,25 - 7,5 mm Whitworth thread-cutting-120 - 4 TPI Thread-cutting module-0,0625 - 1,875 module Thread cutting pitch-480 - 16 dP Transverse displacement support-235 mm Chisel displacement support-110 mm Pinole diameter-100 mm Loose head-MK 4 Weight-1700 kg Price is ex VAT!

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Iodpeibikwofx Ahuotb Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location.

Condition: excellent (used), Year of construction: 2014, Drilling line consisting of: 1. MAHROS - BRUSH CF loading system 2. MORBIDELLI - ZENITH F2 CDM through-feed drill 3. MORBIDELLI - ZENITH F2 CDM through-feed drill 4. MAHROS - BRUSH SF unloading system Machine connected - works daily in one shift. The first drill has: upper vertical heads - 3 pcs lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs The second drill has: Iodogb D Afspfx Ahustb upper vertical heads - 3 pcs lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs rear horizontal heads - 6 pcs Below are details of the machine and a video The possibility of seeing the machine every day. Line availability August 2021

Condition: new, New rotary lobe pump, rotary pump with electric gear motor Hy-Line Rotary Lobe Pump, industrial pump Hygienic rotary lobe pumps with stainless steel multi-lobe rotor Manufacturer JABSCO-by-Packo HP Hy-Line Type: LH76R B012& (serial no. 44927) Year of construction 2018 Delivery rate: approx. 73 m³/h Itodpfxoitv Rls Ahueb Delivery rate per revolution: 3 liters/rev Delivery rate at 407 rpm gearbox speed: 1221 liters/min. Delivery pressure: max. 5 bar Rotor speed: max. 600 rpm. Pump inlet connection diameter: 152 mm Pump outlet connection diameter: 127 mm Weight of the pump unit: 165 kg SIEMENS electric motor with gearbox Type: RX 97 DRN180M4/TF Mains connection: 400 Volt, 50/60 Hz Drive power: 18.5 kW Motor speed: 1781 rpm. (specified at 60 Hz) Gearbox speed: 489 rpm. (specification at 60Hz) Motor speed: 1480 rpm. (at 50Hz) Gearbox speed: 407 rpm. (at 50Hz) Gear ratio: 3.64 Output torque: 360 Nm very good condition - as good as new - unused from stock Application: Conveying of: Polymers paper coatings Soaps and surfactants Paints and dyes Pharmaceutical applications Food applications 2 pieces available Price per piece

Condition: like new (used), Year of construction: 2019, Roofing batten Raimann line with minibundling and stacking. Included is: - infeed mechanism - Raimann Profirip 340 (2019) - outfeed rubber belt conveyor - ejecting roller conveyor - accumulating conveyor (before minibundling) - minibundling machine (4 mb/min) - accumulating conveyor (after minibundling) - stacker (7 layers/min) Raimann Profirip 340 parameters: Year of manufacture: 2019 Speed: 10-80m/min Main motor: 55kW Cutting height: 15-140mm Maximum widht: 340mm Line is in good working condition, still in operation and is available for viewing in sawmill in Slovakia. Reason of sale is upgrade to 250m/min planer line. Itodpfx Aomk S S Eehujb For more information or to arrange viewing feel free to contact us.