Conveyor belt continuous furnace

Mahler DLE 600/200/3000 G

Year of construction: 2015, condition: ready for operation (used), A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible. Ksdjxrf Iuopfx Ah Asdp

Year of construction: 2015, condition: new, Vertical furnace height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW Kdedscdi D Depfx Ah Aop circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Year of construction: 1996, condition: used, machine/vehicle number: MBMAKZ, Demag chain hoist Crane hoist 250Kg DKUND 2-250 K V1 with double chain 125Kg payload each Ksdstn Rirjpfx Ah Aedp 250KG / 0.25t payload / lifting capacity - 1 fall Distance between the two lifting chains approx. 1.2m (can also be shortened) Lifting height approx. 3.5m Complete with control cylinder (approx. 3m) Weight complete approx. 60 kg, connection to 400V 50Hz TOP condition, fully functional. No worn or used device! Connect and put into operation. Comes from current operation Item location is 75053 Gondelsheim See pictures

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Kdjdpjxf Up Isfx Ah Aop

Condition: like new (used), Year of construction: 2017, operating hours: 1,666 h, functionality: fully functional, machine/vehicle number: 70110001 Seriennummer: 17003187, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, total width: 1,515 mm, total length: 2,060 mm, total height: 2,910 mm, volume flow: 10,000 m³/h, noise level: 68 dB, space requirement height: 3,000 mm, space requirement width: 2,000 mm, space requirement length: 2,500 mm, filter area: 400 m², negative pressure: 2,800 Pa, power: 2 kW (2.72 HP), input frequency: 50 Hz, input current: 12 A, tank capacity: 150 l, Equipment: type plate available, The FILTOWER 100 is a multi-stage filtration system designed for both odor and pollutant reduction. The recirculation of purified air back into the hall occurs with minimal drafts via the filter tower’s lateral, floor-level displacement air outlets. This ensures that personnel are continuously and efficiently supplied with clean air. Air circulation is enhanced because the bottom-up airflow supports the upward movement of suspended fine dust or smoke particles, thereby improving their capture. Max. air flow rate (m^3/h): 10,000 Max. negative pressure (Pa): 2,800 Connection voltage (V): 400 Drive power (kW): 2x3.9 Filter surface (m^2): 100 Number of filter elements: 4 Dust collection drawer (l): 150 Kdsdpfx Ahoxb Tw As Asp Dimensions L/W/H (mm): 2,060x1,510x2,950 Weight (kg): 1,100 Sound emission (db(A)): 68