Used veneer fabrication for sale (130)

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 861953, cutting length (max.): 2,050 mm, cutting height (max.): 60 mm, overall weight: 1,600 kg, cutting width at rip fence: 800 mm, Casati TSA/0 2050 Machine Number : 861953 Year of Construction : 1986 Gjdpfxoztyfqo Ahtjbr Cutting Lenght 2050 Cutting hight 60 Max rear feed width 800mm Min rear feed width 25mm

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, Hot platen press Brand: OMC Type: PL 90s New machine Technical data Plate size: 3000 x 1300 mm Stroke: 400 mm Stroke type: Upward stroke (from bottom to top) Plate type: Elkom electronic plates Press force: 90 tons on 80% of the surface Press cylinder: 6 x Ø 70 mm Specific pressure: 2.05 kg/cm² on 100% of the surface, 2.56 kg/cm² on 80% of the surface Loading and unloading side: 3000 mm Heating system: Electronic 25.4 kW, maximum temperature of 120°C Automatic opening with timer Control panel: Standard Connection: 400 V, 50 Hz, 3 ph Safety device: Safety cable around the entire press Emergency button Two-hand operation CE standard Press structure The press structure is made of composite and welded steel. The structure of both the fixed and moving platen is made of composite and welded steel. The press is equipped with a rack and pinion guide system to ensure perfect parallel movement during the closing/opening of the plates. Elkom heating plate Elkom electric plates with electric resistors The plates consist of a chipboard on which an aluminum sheet with the electric resistors is mounted. Gsdezt Darepfx Ahtsbr Maximum working temperature 120°C. Maximum thrust = 7 kg/cm² Hydraulic system - The hydraulic system consists of a two-stage unit with submersible pump to reduce noise and lubricate the rotating parts. - Pump for fast closing/opening (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). - 2 HP electric motor - The hydraulic unit is equipped with the following control/safety valves installed on the tank: - Maximum pressure valve: prevents excessive pressure in the hydraulic system in the event of an electrical or electronic control fault - Pressure retention valve (check valve) - Valve for low drain pressure (pre-drain valve). It prevents dangerous shocks within the system. - Oil drain magnetic valve Control panel and electrical system The pressing parameters can be set on the control panel, which is equipped with the following switches/meters: - 2 temperature regulators for setting the plate temperature - Pressure gauge for pressure regulation with automatic pressure equalization system - General on/off switch - Two manual safety buttons for closing the press - Timer for automatic opening - Switch to select manual or automatic opening of the platens after the work cycle . - Off/on switch for upper and lower platen resistance Safety systems - Timed bimanual control for closing the press - Safety rope on the four sides of the press - Platen lock for maintenance - Protective guards for the pinion and rack units - Safety stickers and warning notices - Operating and maintenance manual - The press complies with CE standards Optional: Touchscreen display - Programmable logic controller 7-inch color touchscreen display specially developed for setting the following parameters - temperatures - pressing time - Daily setting of the heating system - automatic switch-off of the heating system when the set temperature is reached and automatic temperature recovery - new system for automatic pressure setting - Possibility to save historical data/parameters - Diagnostic system Sensor for checking the plate parallel stroke Anodized (anodized) surface on the 2 plates Electrical exclusion of 2 cylinders + sensors for parallel control Mylar film on panels Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top)

Condition: ready for operation (used), Year of construction: 1996, pressing force: 14 t, This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. • Plate dimensions: 2550 x 1350 mm • Heating: Hot water heating • Number of pressure cylinders: 6 • Total pressing force: 135 t Godpfxszt A Hwj Ahtsbr

Condition: ready for operation (used), Year of construction: 2019, This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine. Machine Benefits Gbedpfxszt Atwe Ahtsr Technical Machine Benefits • For connection to existing heating system / pressing temperature up to 90°c / the fabricated steel platen can take a maximum pressure of 5kg/cm²Plate: 110 X 240 cm, 120T, 5kg/cm2

Condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, empty load weight: 31 kg, For assembling veneers with thicknesses of approximately 0.4 – 2 mm. The KUPER glue thread, applied in a zigzag line by a heated thread guide, guarantees tightly sealed and robust joints. The thread side is positioned inward during pressing, eliminating the need for tedious sanding of adhesive residue. An ideal machine featuring all the advantages of KUPER zigzag gluing machines. Key features: * Durable PUR coating * Disc wheel system with tolerance compensation for various veneer thicknesses * Stainless steel worktable * Hard chrome-plated pressure roller * 8-step switch for adjusting the heating power * Start/stop foot switch Technical specifications: Throat depth: 630 mm Feed rate: approx. 7 m/min Veneer thickness: approx. 0.4 – 2 mm Drive: 200 V electric motor Voltage: 230 V, 50 Hz Gbjdpfx Ahexdxh Eotor Net weight: 31 kg Gross weight: 40 kg Carton dimensions: 97 x 45 x 46 cm Standard accessories: 1 test spool of original KUPER glue thread Type K 12 10 threaders 103070 1 kg separating agent 105661 1 set of tools, 1 operating manual Glue thread supply available on request! Item No. 0115034

Condition: new, functionality: fully functional, Practical – ready for immediate use without instruction. The devices are ready for operation after just 5 minutes of heat-up time. The integrated temperature controller allows stepless adjustment of the heat as needed – ensuring the optimal melting temperature for the adhesive thread. The pressure applied with the hand gluer is sufficient to firmly press the adhesive thread onto the veneer sheet. Key advantages at a glance - only approx. 5 minutes heat-up time - precise, straight-line bonding - clean thread separation Gjdpfx Asxdxlkehtobr - maintenance-free Item no. 0132772

Condition: new, functionality: fully functional, For efficient and clean joining of smaller quantities of veneer. A special KUPER glue thread is applied to the joint in a zigzag line. Easy and simple to handle, ready for use quickly, and features low power consumption. All the advantages of the KUPER glue thread. An ideal device for assembling smaller quantities of veneer. The device is supplied fully equipped (ready to connect) with a 2.75 m connection cable (for 230V mains voltage). Gedpfxsxdxbfo Ahtobr Net weight: 1.9 kg Gross weight: 2.4 kg Standard accessories: 1 test spool of original KUPER glue thread type K 12, 10 threaders Glue thread available on request! Item no. 0121383

Condition: new, functionality: fully functional, Standard equipment: - Pneumatic clamping via 2 external clamping cylinders - Saw carriage guided by 2 high-precision linear guides Gbedpfxexd Sf Rs Ahtjr - Extraction device for connection to a dust extraction system, connection diameter 100 mm - 1 carbide-tipped saw blade, diameter 200 mm - Front support, 250 mm wide, fixed installation, manually adjustable with planing unit - Maintenance unit Opening height: 57 mm Veneer pack cutting height: 32 mm Three-phase motor: 2.2 kW Operating voltage: 230/400 V Item no. 0174200

Condition: new, functionality: fully functional, For repairing and cross-gluing veneers. Godoxdxk Hspfx Ahtebr Damaged or torn veneers are reliably repaired with the simplest handling. Combined veneer strips achieve optimum tear resistance thanks to end cross-gluing. The perfect design fully utilizes the advantages of the KUPER glue thread. The practical construction of the device allows immediate use without extensive training. After an approximate preheating period of 5 minutes using the temperature controller (sold separately), the KHL 1 is always ready for operation. Light pressure is sufficient to efficiently apply the glue thread to the veneer sheet. Smooth operation is ensured by maintenance-free use. Net weight: 1.2 kg including 1 spool of glue thread 1.8 kg with temperature controller Gross weight: 2.5 kg Standard accessories 1 test spool of original KUPER glue thread type K 3, 10 threaders, 1 operating manual, item no. 51204 Item No. 0132771

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, For assembling veneers with thicknesses of approx. 0.4 - 2.0 mm. The machine operates using a special glue thread, which is applied in a zig-zag pattern over the joint. High adhesion and tear resistance ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is positioned inward, eliminating the need for sanding off the adhesive medium. Key features: * Torsion-resistant C-frame construction made of steel * Durable PUR coating * Stainless steel worktable * Standard industrial machine heating system * Disc wheel system with tolerance compensation for varying veneer thicknesses * Adjustable heating output for stationary and running operation * Electrically controlled thread tearing roller * Fully automatic start/stop function via light sensor Technical specifications: Throat depth: 920 mm Feed rate: approx. 20 m/min Gedpfexdxcpox Ahtebr Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 Volt, 50 Hz, 3-phase Total connected load: approx. 0.97 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offer available on request! Item No. 0152300

Condition: new, input voltage: 400 V, input frequency: 50 Hz, For joining veneers with thicknesses ranging from approximately 0.3 to 3.0 mm. The machine uses a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tensile strength ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded internally, thus eliminating the need for sanding the adhesive medium. Specific features: * Torsion-resistant C-frame design made of steel * Stainless steel worktable * Standard heating system * SP control system * Pneumatically regulated adhesive pressure * Disc wheel system with tolerance compensation for various veneer thicknesses * Adjustable heating performance for both idle and processing modes * Tool-free adjustment of the adhesive pressure roller * Fully automatic start/stop function via photoelectric sensor Technical data: Gedpfxjxdxccs Ahtebr Throat depth: 1250 mm Feed: 4 speeds, approx. 15, 30, 45, 60 m/min Veneer thickness: approx. 0.3 – 3.0 mm Operating voltage: 400 V, 50 Hz, 3 phase Compressed air connection: R 1/4'' Compressed air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offers available upon request! Art. No. 0149650

Condition: new, functionality: fully functional, - Device for unrolling and moistening joint paper; including operating manual - for use with joint paper up to 20 mm wide Required joint paper available on request! Godsxd Sldspfx Ahtebr

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, OUR BESTSELLER – 1000 mm Throat Depth Veneer splicing machine for gluing veneer strips including glue application unit with nearly horizontal glue application disc. Perfect in combination with glue cooling system (optional). NEW INDUSTRY 4.0 All essential machine and performance parameters are recorded, transmitted and made available centrally for analysis (optional). Additional modules for monitoring power and compressed air consumption available (optional). SPECIFIC FEATURES - Innovative veneer feeding system with disc wheels and tolerance compensation mechanism for jointing without offset - Low-maintenance, energy-saving, and veneer-friendly high-performance plastic chains (excellent sliding properties, minimal heat conduction, and no discoloration) - 12 mm slim, chrome-plated heating rails ensure minimal stress on veneer due to shrinking, and significantly reduced energy consumption - Intelligent automatic energy management for standby and operating mode Gsdpfexdxktsx Ahtobr - Intuitive control panel with all key functions at a glance, parameter memory TECHNICAL DATA* Throat depth: 1,000 mm Veneer thickness: approx. 0.35 – 2.5 mm, optionally from approx. 0.25 mm, optionally up to approx. 5.0 mm Veneer lengths: from approx. 300 mm Veneer width: from approx. 35 mm Feed speed: steplessly adjustable from 12 – 55 m/min Operating voltage: 400 V, 50 Hz, 3 Ph + N + PE Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar *Subject to material testing, depending on wood species and micro or thick veneer package (option) only without micro and thick veneer package (option) GLUES Suitable for urea resin adhesive Glue offer available on request! Item No. 0164700

Condition: used, total length: 3,800 mm, total width: 1,650 mm, total height: 2,400 mm, Colour: Green Empty weight: 3.500 kg - Details: - └ Description: The plates need to be repaired - Documentation available: No - CE certificate present: No - Main motor power [kW]: 2.2 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 450 - Total stroke [mm]: 450 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 1 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Heating boiler present: Yes - Heating type: Oil heated - Max. temperature [°C]: 120 - Top/bottom separately heated: Yes - Voltage [V]: 400 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 3800mm x 1650mm x 2400mm (l x w x h) - Transport weight [kg]: 3500kg Gbsdpfx Asztc R Aohtjr - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 3,950 mm, total width: 1,500 mm, total height: 2,150 mm, Colour: Green Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Serial number: 19198 - Main motor power [kW]: 1.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3100 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 390 - Total stroke [mm]: 390 - Number of work zones [pcs]: 3 - Number of levels [pcs]: 3 - Plate material: Wood - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 80 - Total pressure [Ton]: 160 Gsdpfx Aoy Rq Efjhtsbr - Options: Disable partial cylinders - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 1.1 - Transport dimensions: 3950mm x 1500mm x 2150mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), functionality: fully functional, cutting length: 2800 mm rear guide Godpsw D Nq Hjfx Ahtjbr

Condition: reconditioned (used), Year of construction: 1985, cutting length (max.): 3,200 mm, cutting width (max.): 450 mm, cutting height (max.): 65 mm, overall weight: 4,800 kg, total length: 5,200 mm, equipped with protective photocell barrier Gjdpfx Aswy Ukqjhtobr

Condition: good (used), functionality: fully functional, I am selling a Scheer FM 2-30000 joining and precision cutting machine from my carpentry workshop. The machine is still in good condition but is no longer being used. That is why I am selling it. Gbsdpfx Aeztgnljhter The machine can be inspected and tested on site in Stuttgart.

Condition: used, Year of construction: 1995, Max. veneer thickness: 3.0 mm Gluing system: glue application roller with roller heating Disc: Yes, for transporting the veneer across the veneer table. Machine type: stationary Feed rate: 5 - 15 m/min Feed type: stepless Gbsdpfx Ajzkh S Hshtor Stand overhang: 950 mm Working height or feed table height: 940 mm Description: The glue is applied from below; the outer side of the veneer is always visible, with automatic thickness and tolerance compensation. Approximate weight: 400 kg Dimensions: 1700 x 900 x 1550 mm Motor power: 0.8 kW Storage location: Nattheim

Condition: used, Year of construction: 1983, Max. press length: 2500 mm Max. press width: 1250 mm Total pressing force: 80 t Specific pressing force: 2.5 kg/cm² Press opening width: 400 mm Heating plate material: standard aluminum Operation: button control Swivel button: Yes Gedpfxezkl Tbe Ahtebr Number of pressure pistons: 4 Safety edge strip: Yes Condition of heating plate: good Weight: 3800 kg Dimensions: 2850 x 1410 x 2000 mm Storage location: Nattheim

Condition: used, functionality: fully functional, Kuper Hymmen AS 220 Veneer Guillotine Gedpfx Ajzt Sc Ushtebr Cutting width: 2200 mm Cutting depth: 1020 mm Electronic cutting fence travel Knife activation: two-hand control for safety Safety gate Guillotine motor: 4 kW Clamping motor: 1.5 kW

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Gbjdpfx Asxgqmxehtjr Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Year of construction: 1998, condition: excellent (used), used Year: 1998 Start type: to be agreed Gbodpfx Ajd I Id Hjhter Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Saws in Poland Subcategory: Longitudinal saws for veneer

Condition: used, Year of construction: 1997, Arm reach: 920 mm Feed rate: approx. 15 m/min. Veneer thickness: approx. 0.4 - 2 mm Compressed air connection required Storage location: Nattheim Gjdpfsy H Hgkjx Ahtsbr

Condition: used, Year of construction: 1999, Max. cutting length: 4200 mm Max. cutting height: 45 mm Max. cutting depth: 515 mm Saw blade diameter: 180 mm Clamping beam movement: pneumatic Fencing system: Fence indicator: Dust extraction channel: Yes Gjdpezhu Agofx Ahtebr Dust extraction: external dust extraction Feed type: manual Dadoing unit: with diamond-tipped saw blade (secondary cut) Machine type: stationary Weight approx.: 950 kg Dimensions: 5400 x 1180 x 160 mm Motor power: 2.2 kW Dust extraction diameter: 80 mm Storage location: Nattheim