Used injection molding machinery for sale (1,229)

Condition: excellent (used), Year of construction: 2012, operating hours: 10,092 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, Equipment: documentation/manual, Krauss Maffei 160 ton injection molding machine Lhsdps Ad Igbofx Amzjn

Condition: good (used), Year of construction: 2012, ENGEL VC2550/400 (400 ton & 80mm screw) Lhodpfx Amo Ad Ipcozon

Condition: repair required (used), Year of construction: 2019, operating hours: 14,967 h, functionality: not functional, machine/vehicle number: 750090, total height: 1,885 mm, total width: 800 mm, total length: 1,240 mm, We are offering this Arburg freeformer 200-3X machine for processing thermosetting plastics, year of manufacture 2019, which requires repair. Ledo Adprlspfx Amzjhn Description of fault: Extrusion unit 1 is functioning correctly. Extrusion unit 2 is defective (the Arburg service technician suspects a problem with the piezo element or piezo driver). The machine had problems starting up. However, after repeated restarts, it is now functional. Manufacturer: Arburg Model: freeformer 200-3X with dual material preparation Year of manufacture: 2019 Condition: in need of repair Category ID: 1208 Type ID: 1354 Machine type: Machine for thermosetting plastics Machine number: 750090 Air heat exchanger for active machine temperature control Build chamber heating up to 120°C and temperature control for plasticization up to 300°C Equipment for inline material drying for material preparation 1 and 2 Data preparation software (slicer) incl. license If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2019, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, Equipment: documentation/manual, ARBURG electric 200 ton machines Lhjdpfxo Ad Icps Amzon

Condition: ready for operation (used), Year of construction: 2021, clamping force: 2,700 kN, overall weight: 10,700 kg, Vertical injection moulding machine manufactured in 2021. This Kloeckner Desma D 969.250 Z (S3) features a clamping force of 2700 kN and an injection volume of 500 cm³. The machine is equipped with a high-pressure injection unit and a touch-operated control system for process monitoring. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma D 969.250 Z (S3) machine we have for sale. Contact us for further details. Lode Ad Inljpfx Amzehn - Clamping Force: 2700 kN (300 US tons)- Injection Volume: 500 cm³- Injection Unit Type: B500HP (High Pressure)- Injection Pressure: 3500 bar- Nozzle Contact Force: 58 kN- Control System: 2030 TBM (Touch operation / process monitoring)- Operating System Status: Active 3,360 hours- Operating Hours (Hydraulic Motor): approx. 730 hours- Operating Hours (Hydraulic Pump - Clamping Force): 65 hours- Total Current: 138 A- Recommended Backup Fuse: 160 A- Supply Cable Cross-Section: 70 mm² Cu- Voltage: 3~400 V +N +PE- Frequency: 50 Hz- Max. Short-Circuit Current: 10 kA- Total Machine Weight: approx. 10.7 t (10,700 kg) (Clamping Unit + Hydraulic Unit: 9,700 kg; Injection Unit: 1,000 kg)- Footprint: 10 m²- Total Floor Load / Ceiling Load: 1,070 kg/m²- Foot Area / Floor Contact Area: 2,010 cm²- Specific Ceiling Load: 5.3 kg/cm²- Hydraulic Oil Tank Volume: 450/130 l- Temperature Control Medium Tank Volume: 2x7 l- Compressed Air Pressure: 6 bar- Compressed Air Flow: 0.5 m³/h- Cooling Water Flow: 1.6 m³/h- Cooling Water Inlet Temperature: max. 20 °C at 2.5 bar- Cooling Water Connection: 22-L- Pump Power / Rated Power: 22 kW (28.6 hp)- Pump Current Consumption: 32.0 A- Pump Pressure: 265 bar- Pump Flow Rate: 72/39 l/min- Maximum Mold Width: 560 mm- Maximum Mold Length: 780 mm- Platen / Stroke Dimensions: 600 mm stroke, platen distance 1480 mm, clamping stroke details 710 mm- Heating Plate Center Bore / Ring Size: Ø80 H9- Enclosure Type (UL): 1

Condition: excellent (used), Year of construction: 2017, operating hours: 15,635 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 26 mm, displacement volume: 57 cm³, tie bars: 370 x 320 mm Mould height min: 150 mm Opening stroke: 270 mm Injection weight: 52 g Lhsdpfxj Ad N Ers Amzjn Screw: 26 mm Injection pressure: 2200 bar Auswerferkraft: 19,6 kN

Condition: used, Year of construction: 2014, machine/vehicle number: PR20, Used Injection Molding Machine AOKI year 2014 The Used Injection Molding Machine AOKI year 2014 represents a highly efficient and precise solution in the field of packaging, specifically designed for the production of preforms for plastic bottles through the injection and  molding process. Manufactured by Aoki Technical Laboratory, Inc., a recognized leader in molding technology for packaging, this machine offers reliable performance with a proven track record. The model SBIII-100L-20, produced in May 2014, is a used machine in excellent condition, providing exceptional value to companies looking to integrate it into their existing production lines. Moreover, the machine’s advanced features and high output make it suitable for large-scale production environments. Lodpfxs Adt T Hj Amzohn Injection and Molding Technology The Used Injection Molding Machine AOKI year 2014 utilizes the highly advanced injection process, which is ideal for producing high-quality containers. These containers include preforms for beverages, detergents, and cosmetics, all requiring specific standards for shape, weight, and strength. The injection system ensures that the plastic is injected into the mold with precision, creating a uniform preform that can then be expanded using the molding process. This process enables manufacturers to produce high-quality, consistent bottles with minimal defects. This combination of features makes the machine highly effective for industries where high volumes of bottles are required, such as beverage production and packaging. Furthermore, the SBIII-100L-20 model can produce preforms with a capacity of about 2500 CC per cycle, making it capable of handling both small and large bottle sizes. The machine is equipped with features that allow it to work efficiently with various bottle dimensions, such as 80 mm for the mouth diameter, 105 mm for the body diameter, and a height of 335 mm. Electrical and Hydraulic Specifications of this Used Injection Molding Machine AOKI One of the key advantages of the Used Injection Molding Machine AOKI year 2014 is its robust electrical and hydraulic design. The machine operates at 380V voltage and a frequency of 60Hz, providing the necessary power for consistent and reliable performance. It consumes a total power of 32.3 kW and requires a current of 62A, making it energy-efficient for its high output. The hydraulic system works at a pressure of 14.0 MPa, which ensures optimal performance when injecting and shaping the preforms. The pneumatic system operates at 3.0 MPa, providing additional support for the molding process. Additionally, the machine needs a water supply pressure of 0.3 MPa, allowing it to run smoothly in various industrial setups. This high level of specification makes the machine adaptable to a wide range of production requirements and ensures that it can handle various materials and production rates effectively. The inclusion of both hydraulic and pneumatic systems provides precision in every cycle, while the robust electrical components contribute to energy efficiency and reduced operational costs.

Year of construction: 1999, condition: used, Clamping force: 8,000kN, operating voltage: 400V, mains frequency: 50Hz, power supply: three-phase AC, 3 phases, total rated current: 400A, max. motor current: 205A, upstream fuse protection: 2x200A, an on-site inspection is possible. Ljdpfx Ao Ad Nn Homzjhn

Condition: used, Year of construction: 2011, operating hours: 11,591 h, functionality: fully functional, machine/vehicle number: B610, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,830 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 150 kg, number of injections: 897,476, power: 3 kW (4.08 HP), type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, For sale is a very well-maintained Cronoplast 6/10P injection molding machine from 2011. The machine was operated exclusively by a professional injection molder, regularly serviced, and is in excellent condition. Thanks to its extensive additional equipment, this system offers optimal conditions for efficient, precise, and stable production processes. Equipment & Highlights ✔ Selector valve – ensures clean part ejection and optimized part handling ✔ Ceramic heating elements – enable higher processing temperatures and energy-efficient heating ✔ Electric mold heater – provides precise mold temperature control ✔ Stable machine frame – ideal for operation and maintenance ✔ Air blow system – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Since you are buying directly from the machine owner, you save on dealer commission costs. We have other machines of this type in stock. The equipment is identical; operating hours may vary. Contact us, and we will offer you an attractive package price. Lhedpeytgmvofx Amzon Technical data – Cronoplast 6/10P Screw / Injection unit Technical data - Cronoplast 6/10P Plasticizing unit - Piston diameter 12 mm - Displacement volume 6 cm³ - Specific injection pressure 1830 bar Clamping unit - Clamping force 62.5 kN - Opening force 4 kN - Opening stroke 30-110 mm - Ejection force 5 kN - Ejection stroke 45 mm Dimensions: - Weight including frame approx. 350 kg - L x W x H: 116 cm x 80 cm x 198 cm The sale is made excluding any warranty and liability for defects.

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity Lsdpsxqhuuefx Amzehn - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: used, Year of construction: 2013, Application: PET preform injection molding Machine type: High-performance, two-stage PET preform injection molding system Clamping force: 2250 kN Injection configuration: P100/110 injection unit with E100 extruder Maximum PET shot weight: 3,344 g / 7.4 lb Minimum PET shot weight: 372 g Injection unit stroke: 340 mm E100 extruder PET transfer capacity: 3,613 g Tie bar spacing: 660 x 660 mm Clamping stroke: 755 / 920 mm Shut height range: 585 / 750 mm Daylight: 1,505 mm Ejector stroke: 200 mm Approximate clamping unit weight: 7,802 kg Approximate total injection unit weight without oil: 13,150 kg Compatible mold configurations listed by HUSKY: 6, 8, 12, 16, 24, 32 and 48 cavities Maximum listed cavity configuration: 48 cavities Typical preform applications include PET bottles and other high-volume packaging products Lhjdpfxo Abarks Amzjn Designed for high productivity, repeatable molding performance, and integrated preform production cells.

Condition: good (used), Year of construction: 2022, Brand: Dr. Boy GmbH & Co. KG Type: BOY 60E #55841 Year of manufacture: 2022 Operating hours: On request Screw diameter: 32 mm Ledpfx Aez Tiwhemzehn Maximum injection pressure: 2,142 bar Maximum shot volume: 100.5 cm³ Clamping force: 60 T Maximum distance between tie bars: 360 x 335 mm Minimum mold height: 250 mm Maximum distance between platens: 650 mm Electrical connection: 400 V / 50-60 Hz, 27.2 kVA Heating capacity: 8.4 kW Dimensions: 3,450 x 1,150 x 1,950 mm (L x W x H) Weight: 2,300 kg Options: • Procan ALPHA 4 control system, 15" full-touch display • TEC Package 1: wear-resistant screw and barrel, ceramic heaters • Interface package including OPC-UA, Euromap 77 & 82 • Cooling circuits (3x) on both platens + 8-way water distributor • Oil filling (EconFluid, ISO-32)

Condition: used, Year of construction: 2010, machine/vehicle number: PR29, Used AOKI SBIII-250LS-50 blow molding machine - Year 2010Technical Specifications & Performance DataUsed AOKI SBIII-250LS-50 blow molding machine for industrial packaging and PET container production. This machine is designed to form bottles from preforms, supporting efficient bottle manufacturing as part of a used bottling line or an independent container production operation.Manufacturer: AOKI TECHNICAL LABORATORY, INC.Model: SBIII-250LS-50Year of manufacture: 2010Electrical supply: 3-phase AC, 220 V, 60 HzInstalled power: 50.2 kWCurrent: 165 AMachine weight: 10,400 kgHydraulic pressure: 14.0 MPaPneumatic pressure: 3.0 MPaWater supply pressure: 0.3 MPaAdvanced Automation & Control SystemsThe AOKI SBIII-250LS-50 operates on a 3-phase AC electrical supply rated at 220 V and 60 Hz. Its 50.2 kW power requirement and 165 A current rating should be considered when planning electrical distribution, protection devices and control-panel connection. Blow molding machines of this type are intended for repeatable preform processing and controlled bottle forming in industrial packaging environments.The machine uses hydraulic, pneumatic and water services as part of its operating configuration. These utilities support the forming process and should be connected through suitably rated site installations.Production Line Integration CapabilitiesThis AOKI blow molding machine can operate as the bottle production stage of a PET beverage production line. It is typically installed upstream of downstream bottling equipment such as rinsing, filling, capping, labeling, secondary packaging and palletizing systems. Bottle transfer, accumulation and conveyor interfaces should be matched to the required production layout.As a second hand machine for industrial packaging, it can support PET bottle supply for beverage production and other packaging operations where preforms are converted into finished containers before filling.Machine Condition & Maintenance HistoryThe machine is identified as used and is offered as a blow molding machine manufactured in 2010. Its substantial 10,400 kg construction indicates a stationary industrial installation requiring appropriate handling equipment during loading, positioning and commissioning.Routine commissioning should include inspection of electrical connections, hydraulic circuits, pneumatic supply lines, water supply connections and all machine safety systems before production use.Operational Performance & VersatilityThe SBIII-250LS-50 is intended for PET bottle manufacturing from preforms. In a bottling equipment configuration, a blow molder provides the container supply stage ahead of filling and packaging operations, helping coordinate bottle availability with the production line’s filling demand.Its utility requirements include hydraulic pressure of 14.0 MPa, pneumatic pressure of 3.0 MPa and water supply pressure of 0.3 MPa. Stable utility conditions are important for consistent machine operation in a PET packaging process.Install... Lhsdps Adttgefx Amzen

Condition: not inspected (used), Year of construction: 1999, total length: 6,700 mm, total width: 1,700 mm, overall weight: 6,630 kg, Equipment: documentation/manual, Used ARBURG Allrounder 470 C 1300-675 injection moulding machine, manufactured in 1999. Lhodpfx Amsz I Rv Hjzjn The machine was in fully operational condition and functioned reliably before being decommissioned. It has been stored for approximately 4 years and has not been in regular operation during this period. The machine is now being sold as is. Due to the storage period, inspection and servicing are recommended before commissioning.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Lodsyrczgjpfx Amzohn Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580,580 mm, injection weight: 402 g, opening stroke: 690 mm, installation height: 340 mm, Incl. Geiger robot Midiliner F 10.0 year 2011, Conveyor and safety cage Lodpfx Aj Aarbbjmzohn

Condition: excellent (used), Year of construction: 2017, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 392 cm3 Injection pressure: 2000 bar Lhjdpfoz Aty Hsx Amzjn Euromap 67 1x core puller Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2011, SUMITOMO shi-Demag Lhsdpfx Ao Acf Rhemzjn Systec 120/470-430 Closing force: 120 tons Year of manufacture: 2011 Control system: CDAIS Mold opening distance: 47.5 x 47.5 Installation height: 250 mm Operating hours: 38,877 hours Screw diameter: 40 mm Injection volume: 231 cm³

Condition: used, Year of construction: 1999, functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 250 mm, column diameter: 50 mm, opening stroke: 480 mm, plate length: 450 mm, plate height: 500 mm, total length: 2,200 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 2,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, OLEOPRESS OP/Z 40 hydraulic press. INJECTION MOLDING PRESS Ledpfx Ajzpbc Asmzehn Manufacturer: OLEOPRESS S.r.l. (Italy) Model: OP/Z 40 Year: 1999 Clamping force: 400 kN (40 tons) Configuration: Horizontal – 4 columns Technical data: Distance between columns: 250 × 300 mm Column diameter: 50 mm Maximum opening stroke: 480 mm Plate dimensions: 400 × 500 mm Cylinder heating capacity: approximately 6–8 kW Power supply: 400 V – 50 Hz – 100 A – three-phase Air line pressure: 10 bar Estimated weight: approximately 2,800 kg

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours, in near-new condition. Lhodpfxjwb Dl Te Amzjn The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in near-new condition. It is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but, as part of the site relocation, has now been released for sale. The order confirmation from ENGEL to NYPRO can be found in the documents. The original new price was approximately €330,000, including the crane. Please note: Items 10.0064 to 10.0070 (eFlomo) are not included in the scope of supply! This was not implemented. Everything else as per the order confirmation is fully installed in the machine. I can provide you with the technical data upon request. Included in the price: dismantling the crane and packing it onto two Europallets. Also, removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. If you are interested or have any questions, please do not hesitate to contact me. The machine is located at the Nypro facility near Karlsruhe and can be inspected there. Delivery is possible within a few days. Below, in the documents, you will find the order confirmation from ENGEL to Nypro!

Condition: excellent (used), Year of construction: 2016, operating hours: 33,921 h, functionality: fully functional, ENGEL Duo 1350H/330W/600WP combination machine including robot Year of manufacture: 2016 Operating hours: 33921 h Lsdpfjz Nkavex Amzohn Clamping unit Clamping force: 600 t Opening stroke: 1400 mm Tool mounting height: 450 - 1080 mm Maximum mold parting line distance: 1850 mm Mold size (h x v): 1115 x 975 mm Injection unit Screw diameter: 55 and 35 mm Injection volume: 618 + 154 cm³ Injection weight PS: 590 + 151 g Injection pressure: 2183 + 1600 bar Equipment: - Interface for rotary table/index plates - Core pull system, 2-way fixed mounting plate - Core pull system, 4-way movable mounting plate - Tool heating, 40 control circuits - Microcomputer CC200 Robot Engel Viper 40 RC300 - Max. handling weight: 23 kg - Z-axis: 4280 mm - X-axis: 1200 mm - Y-axis: 1500 mm - C-axis compact drive M - A-axis compact drive M - 8 additional compressed air circuits - 6 additional vacuum circuits

Condition: excellent (used), Year of construction: 2008, KRAUSSMAFFEI injection molding machine KM 1000-4300 MX SIDE INJECTION UNIT KM 380 BOLT-ON LRX ROBOT General Information Parameter Data Manufacturer KraussMaffei Model KM 1000-4300 MX Year of manufacture 2008 Serial number 61012454 Clamping force 11,000 kN (1100 t) Machine weight 54,000 kg Design Two-platen, hydraulic Number of injection units 2 Additional unit KM 380 BO L (Bolt-On) Robot KraussMaffei LRX Note: The KM 1000 designation indicates a 1000 t class, while the stated clamping force of 11,000 kN corresponds to 1100 t. 2. Clamping Unit Parameter Value Clamping force 11,000 kN Dimensions of mounting plates (H x V) 2210 × 1910 mm Column spacing (H x V) 1550 × 1250 mm Minimum mold height 600 mm Maximum mold height 1200 mm Opening stroke 2000 mm Ejector stroke 300 mm FP / MP centering rings 250 / 250 mm Maximum mold weight – fixed platen 25,000 kg Maximum mold weight – movable platen 25,000 kg Maximum total mold weight 50,000 kg Main injection unit – unit no. 1 Parameter Value Screw diameter 80 mm L/D ratio 23 Injection volume 1810 cm³ Volumetric injection rate 503 cm³/s Maximum hydraulic pressure 190 bar Maximum specific injection pressure 2328 bar Screw stroke 354 mm Specified maximum screw speed 955.8 – to be confirmed by the unit Additional side injection unit – unit no. 2 KRAUSSMAFFEI KM 380 BOLT-ON Parameter Value Manufacturer KraussMaffei Type KM 380 BO L Year of manufacture 2008 Serial number 61011975 Unit weight 2500 kg Type Additional side injection unit Screw diameter 40 mm L/D ratio 20 Injection volume 204 cm³ Volumetric injection rate 161 cm³/s Maximum specific injection pressure 1860 bar Screw stroke 160 mm Specified maximum screw speed 391 – to be confirmed by the unit The additional side injection unit enables the implementation of multi-component processes, including 2K technology, provided that a suitable mold and control configuration are used. Robot and automation The machine is equipped with a KraussMaffei LRX linear robot, designed to automate the process of removing parts from the injection mold. The robot model, its year of manufacture, serial number, payload, and ranges of motion for the X, Y, and Z axes need to be confirmed based on the nameplate or documentation. Hydraulic equipment and control Equipment Quantity / parameters Hydraulic mold cores – fixed platen (FP) 2 Hydraulic mold cores – movable platen (MP) 2 Total number of hydraulic core circuits 4 Sequential injection control 16 zones Hot runner control 48 zones Main injection unit Ø 80 mm Side injection unit Ø 40 mm Robot KraussMaffei LRX Technological configuration The machine has two independent injection units, which allows it to be used in multi-component production. The configuration includes: • Main injection unit with an 80 mm screw. • Additional Bolt-On side unit with a 40 mm screw. Lodpfxj Adpc Do Amzshn • Four hydraulic core control circuits. • Sequential control of 16 zones. • Control of the mold hot runners – 48 zones. • KraussMaffei LRX linear robot • Transport data Element Weight KM 1000-4300 MX injection molding machine 54,000 kg KM 380 BO L side unit 2500 kg Total weight 56,500 kg

Condition: good (used), Year of construction: 2005, operating hours: 38,500 h, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 144 cm³, overall weight: 2,500 kg, Demag Ergotech 50-270 Extra Lodpj Aa Afwjfx Amzjhn Year of manufacture: 2005 Closing pressure: 50 tons Stroke: 30 mm Displacement: 144 cm³ Distance between tie bars: 35.5 x 35.5

Condition: like new (used), functionality: fully functional, machine/vehicle number: B-12, 1 CINCINNATI MILACRON Plastic Injection Molding Machine, Machine No. B-12, 500-ton clamping capacity, hydraulic clamping unit, 3.93 in (100 mm) screw diameter, 12.13 in² barrel area, general-purpose screw, 6.70 intensification ratio, 2,640 psi maximum hydraulic pressure, 17,582 psi maximum plastic pressure, 14.17 in maximum shot size, 2,693 g injection capacity, 43.30 in vertical x 43.00 in horizontal tie-bar spacing, 16.00 in minimum mold height, and 55.10 in maximum clamp opening. ESPAÑOL: 1 Máquina inyectora de plástico MARCA Cincinnati Milacron, No. de máquina B-12, capacidad de cierre de 500 Ton, unidad de cierre hidráulica, diámetro de tornillo de 3.93 in (100 mm), área de barril de 12.13 in², tornillo tipo general, coeficiente de intensificación de 6.70, presión hidráulica máxima de 2,640 psi, presión plástica máxima de 17,582 psi, tamaño máximo de disparo de 14.17 in, capacidad de inyección de 2,693 g, distancia entre barras de 43.30 in vertical x 43.00 in horizontal, altura mínima de molde de 16.00 in y apertura máxima de clamp de 55.10 in. Ledpfxsz Svu Ds Amzshn

Condition: used, Year of construction: 2016, machine/vehicle number: PR30, Used AOKI SBIII-250LL-50S - Year 2016Technical Specifications & Performance DataThe AOKI-250LL-50S is a four-cavity injection stretch-blow molding machine with Direct Heatcon technology, manufactured by Aoki Technical Laboratory, Inc. in 2016. Designed for integrated preform injection and stretch-blow molding, this industrial packaging machine supports the production of plastic containers in a compact, controlled process.Configuration: 4 cavitiesInjection capacity: 386.0 cm³/shotInjection pressure: 121.0 MPaInjection rate: 204.2 cm³/secInjection mold clamping force: 490.6 kNBlow mold clamping force: 297.2 kNMaximum preform length below neck: 160 mmDimensions with safety doors closed: 5,340 × 2,100 × 3,410 mmMachine weight: approximately 10,650 kgIn its four-cavity configuration, the machine is suited to containers with an approximate capacity of up to 2.0L, with an example neck diameter of 60 mm, body diameter of 100 mm, and height of 335 mm. The documented product-range examples extend from approximately 0.12L to 5.0L across alternative cavity configurations.Advanced Automation & Control SystemsThe machine operates from a 3-phase 380 V, 60 Hz electrical supply, with total installed power of 75.0 kW and current of 143 A. Its injection system incorporates a 64 mm screw, 120 mm screw stroke, maximum screw speed of 127 min⁻¹, and an AC servo-motor rated at 4 kW.Pump motor: 37 kWBarrel heater: 23.415 kWHot runner heater: 8.41 kWNozzle touch force: 18.5 kNSafety-door enclosed operating footprintThe combined injection and blow-molding arrangement supports repeatable container forming while reducing intermediate preform handling. Machines of this type are well suited to automated industrial packaging environments where process consistency and coordinated mold operation are required.Production Line Integration CapabilitiesThis Aoki injection stretch-blow molding machine can operate as a dedicated container-production asset within a used bottling line or as part of a broader beverage production and industrial packaging facility. It produces molded plastic containers directly from resin, supporting downstream filling, capping, labeling, and secondary packaging operations.Integration planning should account for molded-container transfer, production balancing with downstream bottling equipment, and mold compatibility for the intended neck finish and container geometry. The 4-cavity configuration is documented for approximately 2.0L containers, while the machine category offers flexibility through appropriate mold tooling.Machine Condition & Maintenance HistoryManufactured in November 2016, this second hand Aoki machine is identified as AOKI-250LL-50S. The documented machine identification plate indicates CE marking. Installation planning should include a complete operational inspection, verification of utility connections, and confirmation of mold, heating, hydraulic, pneumatic, and cooling-system condition before commissioning.Opera... Lodpfx Ame Adtr Aezshn