Second-hand machinery for sale (200,000)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting range at 90° (round): 530 mm Cutting range at 90° (flat): 530 × 800 mm Cutting range at 45° (flat): 530 × 520 mm Godpfxezyccxo Adteug Cutting range at 30° (flat): 530 × 320 mm Cutting angle: 45° - 0° - 60° Blade speed: 20–120 m/min Feed length: 1,500 mm MACHINE DETAILS Saw motor power: 3.0 kW Coolant pump: 100 W Hydraulic pump: 370 W Power connection: 400 V / 50–60 Hz Dimensions & Weight Dimensions (L × W × H): 2,500 × 4,000 × 2,500 mm Total weight: 3,500 kg EQUIPMENT Machine stand with chip collection tray Hydraulic cutting pressure control Stepless blade speed control Hydraulic guide arm adjustment Minimum quantity lubrication Automatic shutdown at the end of the cut Chip brush Hydraulic miter adjustment Hydraulic clamping device Hydraulic blade tensioning Operating manual

Year of construction: 2008, operating hours: 24,663 h, condition: ready for operation (used), functionality: fully functional, working width: 2,200 mm, machine/vehicle number: 0-241-06-7504, TECHNICAL DETAILS Saw blade overhang: 125 mm Main saw motor: 18 kW Feed rate: 1–150 m/min Max. clamping width: 2,200 mm FEEDING SYSTEM Godozxgf Uopfx Adtsug Lift table dimensions: approx. 4,300 × 2,200 mm Lift table load capacity: 7 t MACHINE DETAILS Operating hours: approx. 24,663 h (as of 05.10.2023) EQUIPMENT Automatic panel feeding system Lift table feeding system Longitudinal/cross-cutting unit Roller conveyor and transport system

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-240-06-8502, functionality: fully functional, power: 18 kW (24.47 HP), cutting height (max.): 95 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, plate width: 2,200 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Panel width: 2,200 mm Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Godpfx Aozx Anxodtsug Saw carriage feed rate: up to 150 m/min Clamping jaws: 7 pieces MACHINE DETAILS Main saw motor power: 18 kW Scoring saw motor power: 2.2 kW Operating hours: approx. 38,544 h (as of 05.10.2023) EQUIPMENT Automatic rear panel loading system Lift table loading system Lift table Automatic program slider with clamping jaw feed Main saw unit Scoring unit Automatic cutting length and positioning control Angle and back stop Air cushion support tables in the operator area CADmatic operating and optimization environment PICA 108 label printer Roller and transport technology in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting

Condition: used, Year of construction: 2017, operating hours: 1,113 h, machine/vehicle number: G30XL320839, The machine would be serviced by Zünd Spain! TECHNICAL DETAILS Zünd G3 XL-3200 Plotter Vacuum system: 1–9 kW Tool heads Universal tool head UM-ZS G3, working width: 60 mm Universal tool head UM-ZP G3, working width: 60 mm Operating hours: 1,113 h EQUIPMENT Zünd G3 XL-3200 Plotter, item no. 6343200 G3 Vacuum system, CIC, item no. 6438104 ICC camera for S3/G3, item no. 6539101 UM-ZS G3 Universal tool head, item no. 6531006 UM-ZP G3 Universal tool head, item no. 6531007 Universal cutting tool (UCT), item no. 6532001 EOT-250 Oscillating tool, G3, item no. 6532018 Gjdszyktlopfx Adtjug V-CUT tool, G3, item no. 6532021 Creasing tool type 1 (CTT1), item no. 6532051 Creasing tool type 3 (CTT3), item no. 6532053 Zünd Cut Center software package, item no. 6731200 Zünd Cut Center camera option, item no. 6731250 Zünd Cut Center V-Cut option, item no. 6731240 PC and monitor for Zünd Shipping costs for the plotter

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018/219, hole diameter: 75 mm, number of planer blades: 6, operating speed: 6 mm/s, year of last overhaul: 2018, For sale is a very fast and complete Cambio debarking system! In 2018, the machine was completely overhauled, and since then, it has been professionally maintained and equipped with a new knife ring with 6 cutting knives! Godjzx Eaqopfx Adtsug The system can be directly integrated into your existing mechanization! TECHNICAL DETAILS Maximum log diameter: Ø 750 mm Minimum log diameter: 11 cm Shortest log length without an additional feed system: 3 m Shortest log length with an additional feed system: 1.5 m Maximum feed speed: 100 m/min MACHINE DETAILS Rotor motor: 55 kW Feed motor: 11 kW Hydraulic power: 1.5 kW Rotor speed: 220 rpm at 50 Hz Rotor opening: 80 cm Debarking rotor: 6-knife rotor Weight: 10,500 kg EQUIPMENT Complete infeed system Complete outfeed system Electrical system Hydraulics for the infeed rollers New 6-knife rotor from the 2018 overhaul Complete debarking system for integration into an existing mechanization Centering device ZV – 75/2 MA Number of horizontal conical rollers: 2 Drive power per SEW worm gear motor: 1.5 kW EQUIPMENT 2 horizontal conical rollers mounted in pneumatically actuated swivel arms SEW worm gear motors with torque supports in a solid steel design Heavy-duty inlet hopper Complete sensor system Outfeed system AW 800 Drive power: 3.0 kW EQUIPMENT Drive via SEW spur gear motor Machine frame made of welded rectangular tubes for supporting additional machine components Hydraulic shock absorbers

Condition: ready for operation (used), functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, Machining center with automatic material handling (serial number: 0-205-08-1424) TECHNICAL DETAILS Travel in X-axis: approx. 4,760 mm Travel in Y-axis: approx. 1,600 mm Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Tool changer: 2 × 12-position MACHINE DETAILS Control system: PC85 / woodWOP Operating hours CNC: 17,952 h Gujdpfx Adjzx Anfstsg EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbar Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Liquid ring vacuum pumps Note on machine designation: BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.

Condition: ready for operation (used), functionality: fully functional, shovel volume: 1.2 m³, Year of construction: 2017, operating hours: 1,650 h, Equipment: pallet forks, TECHNICAL DETAILS Earthmoving bucket volume: 1.2 m³ Guedpjzylz Dsfx Adtog 4-in-1 bucket volume: 0.7 m³ Clamshell bucket width: 250 cm MACHINE DETAILS Maximum speed: 40 km/h Operating hours: 1,650 h EQUIPMENT Pronar 2600 dozer blade, two-piece, fully hydraulic Pallet fork Note: The wheel loader has been reclassified as an agricultural towing vehicle up to 3.5 tons. A tested tow hitch and trailer socket have been installed for this purpose. This allows for the possibility of applying for a green license plate.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 231458, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 370 mm, spindle speed (max.): 6,000 rpm, table load: 800 kg, Note: The auction end date has been postponed to September 16, 2026! TECHNICAL DETAILS Travel range, X-axis: 3,700 mm Travel range, Y-axis: 2,100 mm Travel range, Z-axis: 370 mm Rotation range, C-axis: 0–362° Swivel range, A-axis: 0–90° Guedpfx Adjzuyryetog Travel time, C-axis (0–392°): 3 s Travel time, A-axis (0–90°): 2 s Spindle speed, electric spindle: 6,000 rpm Power, electric spindle: 16.5/56 kW Speed, X-axis: 30 m/min Speed, Y-axis: 30 m/min Speed, Z-axis: 5 m/min Dimensions, tilting table: 3,500 × 2,000 + 500 mm Load capacity: 800 kg MACHINE DETAILS Stainless steel cover for saw blade with opening for cutter: Ø 425 mm Stainless steel cover for saw blade: Ø 625 mm Total power consumption: 23 kW Water consumption for saw blade: 30 L/min Total weight: 4,800 kg EQUIPMENT Material and saw blade measuring system Vacuum system for moving the panels Camera with software for management Pneumatic tilting table Motorized rotary head (C-axis) Motorized saw blade tilt (A-axis) Stainless steel cover for saw blade with opening for cutter Stainless steel cover for saw blade

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 08450, functionality: fully functional, operating hours: 15,861 h, Edge banding machine + BARBARIC LX U4 B2200 return system! The machine is equipped with the following units: Joint milling VTG gluing unit Quick-Lock glue application Pre-melting tank with automatic granule feed Cutting unit Flush/profile milling KFA-x30 contour milling unit Profile and joint drawing blades TECHNICAL DETAILS Workpiece thickness: 8–60 mm Guodpfezxgfzjx Adteg Feed rate: approx. 6–30 m/min MACHINE DETAILS Power supply: 3 N PE Operating voltage: 400 V Power frequency: 50 Hz Rated power: 32 kW Rated current: 69 A Operating hours of edge banding machine: approx. 15,861 h (as of 2023) BARBARIC LX U4 B2200 return system Year of manufacture: 2014 Serial No.: 2130742-102 Operating hours: approx. 8,997 h (as of 2023) EQUIPMENT Automatic 12-position edge magazine Pre-melting tank with automatic granule feed

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Gujdpfx Adewuzzreteg Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, Year of construction: 2023, machine/vehicle number: 1811058641, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a wire erosion machine manufactured by WEISSER, model: Univertor 8C. Guedpfxozy Ukhj Adteg TECHNICAL DETAILS Three-phase operating voltage: 400 V AC Frequency: 50 Hz Total connected load: 34 kVA Control voltage: 24 V DC Magnet voltage: 24 V DC Rated machine current: 49 A Main connection fuse: 100 A Short-circuit withstand current: 50 kA

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 004-2024, total length: 2,250 mm, total width: 950 mm, total height: 1,900 mm, overall weight: 740 kg, power: 6.5 kW (8.84 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Distance between saw blades: 45 mm MACHINE DETAILS Gjdpfx Aozvv Rnedteug Operating voltage: 400 V Frequency: 50 / 60 Hz Power: 6.5 kW Operating current: 14.5 A Dimensions & Weight Dimensions (L x W x H): 2,250 x 950 x 1,900 mm Machine weight: 740 kg EQUIPMENT Completely made of corrosion-resistant AISI 304 steel Two parallel saw blades Fully mechanized wheels Adjustable speed of the side blade The machine comes from a business liquidation.

Condition: used, Year of construction: 2016, machine/vehicle number: 179057920, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 65 A, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on site for loading. For sale is a vertical turning lathe manufactured by WEISSER, model: Vector C-1R. Guodpfx Adozy Ukzeteg TECHNICAL DETAILS Year of manufacture: 2016 Three-phase operating voltage: 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Magnet voltage: 24 V DC Rated current of the machine: 65 A Main connection fuse: 100 A, time-delay

Condition: used, Year of construction: 2012, machine/vehicle number: 51357, overall weight: 14,000 kg, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. Gjdszy Ui Rjpfx Adtsug For sale is a horizontal machining center manufactured by Samag, model: SM. TECHNICAL DETAILS Type of machining: Internal machining MACHINE DETAILS Total weight: 14,000 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Gsdpfxjz Aplle Adteug Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52335, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table load: 6,000 kg, controller model: Heidenhain TNC 155, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Table load capacity: 6 t MACHINE DETAILS Control system: Heidenhain TNC 155 Apparent power: 45 kVA Phases: 3 Voltage: 380 V Frequency: 50 Hz Current: 85 A EQUIPMENT Godpfxezz Rmns Adtsug Manual swivel head, 0.1°

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Godowuz Dgspfx Adtoug Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: used, machine/vehicle number: 008494, Position 1: Single Edgebanders HOLZHER-LUMINA + MASTER 5510 Position 2: Panel Return Systems HOLZHER-LUMINA + MASTER 5510 Guodjzbxznspfx Adtsg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 99.125.681, working width: 1,100 mm, overall weight: 2,500 kg, grinding belt length: 1,890 mm, grinding belt width: 1,110 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 2 Guedpfx Ajzxcmzjdteg Unit 1 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,110 mm Roller diameter: 175 mm Roller material: Rubber Motor power: 18.5 kW Unit 2 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,110 mm Roller diameter: 175 mm Roller material: Rubber Motor power: 18.5 kW Max. working width: 1,100 mm Min. working height: 30 mm Max. working height: 183 mm Infeed table length: 400 mm Outfeed table length: 250 mm MACHINE DETAILS Feed motor power: 0.75 kW Voltage: 380 V Current consumption: 36 A Fusing: 63 A Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,800 x 2,320 mm Unladen weight: 2,500 kg Number of transport packages: 1 EQUIPMENT CE marking

Condition: used, Year of construction: 2005, machine/vehicle number: 660093, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a vertical machining center from the manufacturer OPS INGERSOLL, model: OPS 600. MACHINE DETAILS Guodpfxjzy Ukbj Adtog Operating voltage: 400 V 3~ Frequency: 50/60 Hz Control voltage: 24 V DC Current consumption: 22 A Pre-fuse: max. 32 A

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 15 KW Godpfxszq Ur To Adtjug Number of controlled axes: 3 axes Total number of drilling spindles: 37 Total number of tool changer positions: 18

Condition: used, Year of construction: 1998, Format: 520 x 740 mm Equipment: 4 Colors Offset press + Coater axial, circumferential diagonal remote control Gedpfxjx R Dk Ue Adtoug SAPC - Semi-automatic plate change Komorimatic damping All wash-up device automatic PQC: console for ink, Chromed Cylinders Water temperature controller AEC The press comes with a significant spare part package.

Condition: used, Year of construction: 2004, machine/vehicle number: 1130.2623-31, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on site for loading. Gedjzy Ukuepfx Adteug For sale is a CNC lathe manufactured by VDF Boehringer, model: NG 180-2. TECHNICAL DETAILS Operating voltage: 400 V Phases: 3 Type of current: AC Frequency: 50 Hz

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 7687, Year of construction: 2010, operating hours: 23,542 h, load capacity: 6,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,490 mm, No minimum price – guaranteed sale to the highest bidder! Gujdpfezy U Tpex Adtjg TECHNICAL DETAILS Load capacity: 6,000 kg Lifting height: 5,000 mm Overall height: 3,490 mm MACHINE DETAILS Mast type: Simplex Fuel type: Diesel Operating hours: 23,542 h EQUIPMENT Pantograph External reference: SLO187

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Guodpfx Aex A Tbwedtsg Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33