Second-hand machinery for sale (200,000)

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Lajdpfx Amjzb Idremec Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Lsdpfx Amozb Idfjmeac Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,297 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! In January 2025, a new spindle was installed by the manufacturer! The machine has been regularly maintained! Previous use: The machine was primarily used for precision machining. Roughing operations were only carried out to a limited extent. TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 2,200 mm Travel range Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) Vertical: 10,000 rpm Spindle speed S1 (continuous operation) Universal swivel head 2-axis: 18,000 rpm Vertical milling head: TVS 10,000 Swivel milling head: TU 18,000 Laedpszb D Aqjfx Ammjc Tool holder: HSK 63 A Tool changer: 40 tool positions MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (-15 %, +10 %) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 99,222 h Program run time: 61,297 h EQUIPMENT High-rigidity gantry design Precise linear guides and ball screws Generous working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Swiveling milling head with 4th/5th axis Maintenance and service documentation

Condition: ready for operation (used), Year of construction: 2024, feed rate X-axis: 5 m/min, The machine has already been dismantled and stored. TECHNICAL DETAILS Adjustable speed: up to 5 m/min Roller pressure: pneumatic Adjustable temperature EQUIPMENT Manual system Swiveling, patented control panel Monochrome display Automatic sheet separation Anti-curl technology Compact design Faster Foiling KIT Ultra-quiet compressor Console on wheels Lodpfx Aszb Ip Iommjac IVIVID Matrix Omni-Flow Feeder 380 High-stack feeder LC display Adjustable front air flow Central suction belt Note: Accessories are without guarantee. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. Lodpfx Aszcuyijmmsac EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,802 h, functionality: fully functional, machine/vehicle number: 12230000107, spindle speed (max.): 10,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl, laser power: 100 W, Highly accurate 5-axis milling, laser texturing, and laser paint removal on a precision machine! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 560 mm Main spindle speed range: 20 - 10,000 rpm Main spindle drive power: 13 / 9 kW Torque: max. 83 / 57 Nm Tool holder: HSK A63 according to DIN 69893 Table clamping surface: 800 x 650 mm Table load capacity: max. 600 kg Swivel range B-axis: ± 120° Rotational range C-axis: 360° T-slots: 9 x 14 x 63 mm Workpiece dimensions: max. 650 (840) x 500 mm Number of tool positions: 30 Tool weight: max. 6 kg Tool diameter: max. 80 mm Tool diameter with free neighboring pocket: max. 160 mm Tool length: max. 315 mm Tool change time (tool to tool): 1.6 s Tool change time (chip to chip): 8.0 s Rapid traverse: 40 m/min Feed force: 7 / 13 / 10 kN Feed rate: 1 - 40,000 mm/min MACHINE DETAILS Control system: Siemens 840D sl Axes: 5 Total power consumption: 24 kVA Lodpfx Amozcxwromeac Dimensions & Weight Footprint: approx. 4.5 x 3.5 x 2.3 m Machine weight: approx. 11.5 t Operating hours milling machine Spindle hours (according to counter): 4,738 h Power-on hours (according to counter): 18,703 h Operating hours laser Spindle hours (according to counter): 2,802 h Power-on hours (according to counter): 6,177 h EQUIPMENT Swiveling rotary table Laser head 100 W Coolant system Electronic handwheel Documentation

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Laodpfx Aozd Tapemmoc Submitting a bid obligates the bidder to collect the machine on schedule in week 30 of 2026! TECHNICAL DETAILS Travel range X-axis: 1,000 mm Travel range Y-axis: 900 mm Travel range Z-axis: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools 2 pallets Balluff writing/reading system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage monitoring MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel in X-axis: 2,500 mm Travel in Y-axis: 920 mm Travel in Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Lajdszdkhkopfx Ammjc Shipping packages: 3 EQUIPMENT External coolant system Chip conveyor Tool magazine (30 pieces)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 216327, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel range, X-axis: 1,660 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table length: 2,000 mm Table width: 510 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Control system: Mazatrol 640M Operating time according to control system display: 40,843 h Dimensions & Weight Dimensions (L x W x H): 5,120 x 3,000 x 2,800 mm Laodpfx Aozdf Dhommec Unladen weight: 8,250 kg EQUIPMENT Chip conveyor Tool magazine with 30 positions Tools included

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, center width: 1,500 mm, center height: 250 mm, swing diameter over bed slide: 500 mm, spindle speed (max.): 2,800 rpm, controller model: Monforts Control System MTC K, The machine was overhauled in 2017! The corresponding invoices are available upon request. TECHNICAL DETAILS Swinging diameter over bed: 500 mm Swinging diameter over slide: 290 mm Distance between centers: 1,500 mm Spindle bore: 70 mm Laedozdfzaspfx Ammjc Center height: 250 mm Spindle speed: 2 - 2,800 rpm MACHINE DETAILS Control system: Monforts Control System MTC K Control method: Teach-in Dimensions & Weight Dimensions (L x W x H): 3,350 x 1,550 x 1,800 mm Net weight: 3,300 kg Transport packages: 1 EQUIPMENT Fixed steady rest 3-jaw chuck Documentation CE marking

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm Lasdpezdfgpsfx Ammjc B-axis rotation: 360° Table length: 1,500 mm Table width: 660 mm Tool holder: ISO40 Max. spindle speed: 10,000 rpm MACHINE DETAILS Control system: Fanuc 18i-MB Power: 38.4 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Operating hours: 10,197 h EQUIPMENT External coolant system Chip conveyor Tool magazine with 32 positions CE marking

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, pressing force: 42 t, empty load weight: 1,000 kg, TECHNICAL DETAILS Bending capacity: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Stroke length: 300 mm Stroke width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Shipping weight: 1,000 kg Shipping packages: 2 units EQUIPMENT Documentation Lajdpfxezdfb Ts Ammsc CE marking

Condition: ready for operation (used), functionality: fully functional, actuation type: hydraulic, number of rollers: 3, shaft diameter: 105 mm, empty load weight: 1,000 kg, TECHNICAL DETAILS Power: 3.0 kW Shaft diameter: 105 mm Number of rollers: 3 Number of driven rollers: 3 MACHINE DETAILS Control: Conventional Drive: Hydraulic Vertical/Horizontal: Horizontal Dimensions & Weight Dimensions (L x W x H): 1,400 x 900 x 1,300 mm Unladen weight: 1,000 kg EQUIPMENT Laedozdd N Njpfx Ammoc Additional rollers

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Lsdpfx Amszdd Npsmsac Turning diameter over bed: 350 mm Distance between centers: 600 mm Bed width: 210 mm Travel in X-axis: 271 mm Travel in Y-axis: 600 mm Spindle bore: 62 mm Maximum spindle speed: 3,500 rpm MACHINE DETAILS Control system manufacturer: Siemens Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Net weight: 5,000 kg EQUIPMENT Chip conveyor Three-jaw chuck Bar feeder Driven tools C-axis Note: The parameters are stored, but are lost if the power supply is interrupted. As long as the power supply is maintained, this is not a problem.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JUN4607, Year of construction: 2006, operating hours: 8,835 h, load capacity: 6,000 kg, lifting height: 4,000 mm, fuel type: diesel, empty load weight: 9,160 kg, TECHNICAL DETAILS Load capacity: 6,000 kg Lifting height: 4,000 mm MACHINE DETAILS Lsdpszdqv Iofx Ammjac Unladen weight: 9,160 kg Fuel type: Diesel Engine power: 61.5 kW at 2,200 rpm Operating hours: 8,835 h

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 500 mm, turning diameter: 300 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, controller model: OSP 5000L-G CNC-System, No minimum price – guaranteed sale to the highest bidder! Turning machine with integrated Okuma robot! TECHNICAL DETAILS Turning diameter over cross slide: 450 mm Turning length: 500 mm Turning diameter: 300 mm Spindle bore: 75 mm Spindle speed: 70 - 3,800 rpm Spindle power: 11 kW (30 min) / 7.5 kW continuous operation Travel X-axis: 400 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate XZ: 12,000 mm/min Lsdpfx Aozc E Dfsmmsac Data transmission: RS232 Tool turret: 12 positions MACHINE DETAILS Control system: OSP 5000L-G CNC system Data transmission: RS232 Tool turret: 12 positions Power supply: 3 × 400 V Rated machine power: 21 kVA Maximum load current: 36 A Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 3,900 x 1,800 x 1,800 mm Machine weight: approx. 4,500 kg EQUIPMENT Integrated Okuma robot Automatic parts feeding Ideal for series and automated turning operations Stable and durable design

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 7402-09-03006-03, spindle bore: 90 mm, rotational speed (max.): 2,000 rpm, center width: 3,000 mm, center height: 325 mm, controller model: SIEMENS SINUMERIK 810D, TECHNICAL DETAILS Swinging diameter over bed: 630 mm Swinging diameter over carriage: 380 mm Center height: 325 mm Distance between centers: 3,000 mm Carriage overhang on bed: 700 mm Bed width: 520 mm Longitudinal travel X-axis: 355 mm Longitudinal travel Z-axis: 3,000 mm Tailstock spindle diameter: 100 mm Tailstock spindle travel: 180 mm Maximum workpiece weight between centers: 3,000 kg Maximum workpiece weight in cantilever mode: 500 kg Spindle bore: 90 mm Spindle mounting: DIN 55027/8 Spindle taper: 120 mm Front spindle bearing: 130 mm Main drive power 100% ED / 40% ED: 12 / 18.5 kW Maximum torque: 2,400 Nm Speed: 2–2000 rpm Speed ranges: 3 Range 1: 2–220 rpm Range 2: 50–660 rpm Range 3: 100–2000 rpm Lsdpezc Hmnjfx Ammjac Speed control: 50–120 % MACHINE DETAILS Control system: SIEMENS SINUMERIK 810D Load display on screen: 0–140 % Main drive: 10 kW Power supply: 3 × 400 V / 50 Hz Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 5,600 x 1,950 x 1,850 mm Machine weight: approx. 5,500 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 3,275 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine with only 3,275 spindle hours! TECHNICAL DETAILS Travel in X-axis: 1,100 mm Lasdpfozdkgaex Ammec Travel in Y-axis: 600 mm Travel in Z-axis: 510 mm Table size: 1,300 x 600 mm T-slots: 6 (size 18) Maximum table load: 1,000 kg Spindle speed range: 60 - 12,000 rpm Drive power: 10 / 17 kW Spindle mounting: ISO 40 / DIN 69871A Magazine: 32 positions MACHINE DETAILS Drive power: 10 / 17 kW Internal cooling (IKZ): 20 bar Coolant tank volume: 480 l Spindle hours: 3,275 h Machine operating hours: 15,883 h Control operating hours: 17,706 h

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Lajdpfx Amszcwylemoc Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain iTNC 530, The machine was previously owned by a well-established Formula 1 team from Central Europe! The milling head has been freshly inspected by the machine manufacturer, making it partially overhauled and fully functional. The machine was always covered by a maintenance contract with the manufacturer. TECHNICAL DETAILS Travel range X-axis: 5,000 mm Travel range Y-axis: 3,000 mm Travel range Z-axis: 1,750 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Spindle speed max.: 20,000 rpm Axis acceleration: 5 m/s² Torque max.: 63 Nm Holding torque (clamped) A & C axis: 2,000 Nm Tool interface: HSK 63A MACHINE DETAILS Control system: Heidenhain iTNC 530 Handwheel: HR420 Laodpfxezcqnce Ammec Spindle hours: approx. 37,000 h Power-on hours: approx. 83,000 h Spindle power: 20 kW Power consumption: 130 kW Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Footprint without peripherals (L x W x H): 7,500 x 8,500 x 6,600 mm Total weight: 90,000 kg EQUIPMENT 2-axis tilting milling head 5 Speed infinitely adjustable Minimum quantity lubrication 50-position tool changer Work area enclosure Note: The machine table is not included in the scope of supply, and the drive cables for the X, Y, and Z motors need to be replaced due to their age. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by prior arrangement.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91128554, Year of construction: 2018, operating hours: 1,440 h, load capacity: 1,400 kg, lifting height: 4,550 mm, mast type: triplex, construction height: 2,200 mm, fork length: 1,150 mm, The forklift is in very good technical and visual condition. The tires have been replaced, and a battery service was performed in June 2026. Laodpfxjzdf N Ds Ammec TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 4,550 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex Transmission: AC Battery type: 48V 4EPZS 620 Battery capacity C5: 620 Ah Number of cells: 24 Acid volume: 153 l Front wheels: Pneumatic tires, size 1x BA Three new wheels installed in May 2026 Control type: Standard joystick Operating hours: 1,440 h Motor power: 6.0 kW Battery service: June 8, 2026 Battery load test result: 72% (Result see appendix of the advertisement) Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,270 x 2,200 mm Weight without battery: 2,105 kg Battery weight: 935 kg Total weight with battery: 3,040 kg EQUIPMENT Battery charger (Model: SLT150, Year of Manufacture: 2018) Operator protection roof

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 18,948 h, machine/vehicle number: A0215A0087, laser power: 2,000 W, sheet thickness steel (max.): 12 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 75 mm, No minimum price – guaranteed sale to the highest bidder! A maintenance checklist from December 2025 is attached! The defects listed there have been completely rectified (see attached activity report from Trumpf)! TECHNICAL DETAILS Working area X-axis: max. 3,000 mm Working area Y-axis: max. 1,500 mm Working area Z-axis: max. 75 mm Speed X: max. 60 m/min Speed Y: max. 60 m/min Speed Z: max. 60 m/min Simultaneous speed X/Y: max. 85 m/min Sheet metal thickness, steel: max. 12 mm Sheet metal thickness, stainless steel: max. 6 mm Sheet metal thickness, aluminum: max. 5 mm Workpiece weight: max. 575 kg MACHINE DETAILS Control system: B&R Arnco Laser type: TruCoax 2000 Lajdpfjzdp Ntox Ammjc Laser power: 2,000 W Dimensions and weight Footprint (L x W x H): 7,400 x 3,300 x 2,300 mm Transport width: 2,464 mm Weight: 9,000 kg Electrical connection: 65 kVA Operating hours (as of December 17, 2025) Operating hours, laser: 18,948 h Laser beam on-time: 3,635 h EQUIPMENT Closed machine frame with integrated laser head Motion unit for high-precision machining Drives with maintenance-free three-phase servo motors Sheet metal support accessible from both sides Enclosed beam guidance Fully integrated cooling unit Traveling extraction system Collection container for falling parts under the working area Positioning laser diode FocusLine

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 755T, functionality: fully functional, cutting length (max.): 3,050 mm, sheet thickness steel (max.): 8 mm, No minimum price – guaranteed sale to the highest bidder! Includes a second Siemens S5 control unit as a spare part! TECHNICAL DETAILS Steel sheet thickness: 8 mm Cutting length: 3,050 mm MACHINE DETAILS Lasdpfx Ajzd U R Nsmmsc Hydraulic pressure: 250 bar Total weight: 10,000 kg EQUIPMENT Cybelec documentation Wiring diagram Second Siemens S5 control unit (spare)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Lajdezdrzxspfx Ammec Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, The system consists of the following components: Unwinding station with a lifting device for the rolls and a take-off device Film preheating station KVH 83 Thermoforming machine KMD52BFS TECHNICAL DETAILS Maximum forming area: 520 x 400 mm Minimum forming area: 260 x 250 mm Maximum tool dimensions: 540 x 420 mm Positive forming height: 120 mm Negative forming height: 120 mm Maximum film width: 570 mm Minimum film thickness: 200 µm Maximum film thickness: 1,200 µm Lsdpfx Amjzfgglomeac Maximum speed: 45 cycles/minute MACHINE DETAILS Operating pressure: 6 bar Maximum air consumption: 50 Nl/cycle Heating power, upper heating: 15 kW Heating power, lower heating: 15 kW Vacuum pump: 100 m³/h Voltage: 3x 400 V AC + N + PE, 50/60 Hz Total connected load: approx. 80 – 90 kVA EQUIPMENT Forming station for combined forming and in-mold cutting with steel knives Stacking station, including counting and stack ejection A/B stacking function via a second ejector drive, pneumatically operated Winding station for skeleton waste, motorized Note: No molds are included in the scope of supply.