Used Abe Portable 2X150 L Cip Unit (2016) for sale (80,589)

Condition: used, mileage: 757,305 km, power: 265 kW (360.30 HP), first registration: 03/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Special equipment: Work lights, aluminum air reservoir, driving assistance system: Attention Assist (drowsiness detection sensor), suspension: front springs 7.5 t, single leaf, tinted windshield with sun band, 10.4 cm info display with additional indicator, integrated rear end, communication interface, fuel tank: 290 liters aluminum, alloy rims 9.00x22.5 (ALCOA Dura-Bright), reinforced engine brake, PTO MB 131-2c, programmable special module, chassis lowering without residual air pressure control, tire pressure monitoring system, retarder, acoustic reverse warning (external warning signal), low-maintenance fifth wheel coupling, additional 24V socket in passenger footwell, preparation/switch for lift axle on trailer/semi-trailer, preparation for revolving beacon, transmission oil cooler Further equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 7.5 t, trailer socket 24V / 15-pin, Antos, audio system: radio with USB port, exhaust to right exterior, exterior mirrors electrically adjustable and heated, 170 Ah battery, rear axle differential lock, medium size air pressure unit, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane keeping assist, cab: width 2.30 m, cab: hydraulic tilting equipment, cab: S ClassicSpace, cab: steel sprung, standard, cab: reinforced (Sweden), cab floor with 320 mm engine tunnel, suspension: leaf/air, suspension: front spring support aluminum, electric window lifts, generator 100 A, 12-speed transmission - type: G 211-12, urea tank (AdBlue): 60 l, manual tilting steel roof, rear axle crown wheel 440, body/superstructure: tractor unit, comfort central locking, 3-piece mudguards, unregulated power steering pump, front air intake, engine 10.7 l - 265 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3,700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat cover/upholstery: fabric, cab seats: passenger functional seat, cab seats: standard driver’s suspension seat, front splash protection, front axle stabilizer, cab socket 24V, tachograph / EC control device, aerodynamically shaped underbody paneling, front underrun protection, preparation for toll collection, cranked front axle, regulated water pump, gross vehicle weight permitted: 18.00 t * VIN: WDB96340310042344 * First registration: 30.03.2016 Csdouh Ndwepfx Ahmjhc * Net price Tel./WhatsApp:

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, overall weight: 1,660 kg, load capacity: 360 kg, arm reach: 2,826 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant model: KRCP4, The machine has been completely overhauled (cleaning, oil change, mechanical maintenance, repeatability and load tests)! TECHNICAL DETAILS Payload capacity: 360 kg Arm reach: 2,826 mm Positional repeatability (ISO 9283): ±0.08 mm Number of axes: 6 Maximum additional load Rotating column: 550 kg Link arm: 130 kg Arm: 150 kg Range of motion A1: ±185° A2: –130° / +5° A3: –110° / +162° A4: ±350° A5: ±120° A6: ±350° Axis speeds (rated load) A1: 103°/s A2: 94°/s A3: 100°/s A4: 117°/s A5: 110°/s A6: 163°/s MACHINE DETAILS Controller model: KRC4 Dimensions & Weight Footprint: 968 × 944 mm Robot weight: approx. 1,660 kg Model: KRC4 KR360 Condition: Used Csdpeydbx Isfx Ahmohc Year: 2016 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Manufacturer - ALTech UK Labelling Technologies Ltd. Cedpoy Uni Njfx Ahmohc Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.

Year of construction: 2016, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Stabau roller tracks S1-RGSCH 100 / 8, load capacity / year of manufacture: 2016 / in stock & immediately available / very good condition Price per pair: €2,190.00 net / €2,606.10 gross Load capacity: 8,000 kg Load center of gravity: 1,500 mm Weight: 710 kg (complete set) Overall length: 3,000 mm Overall width: 500 mm Please refer to the attached images for precise pocket dimensions. Chjdpfx Ahsznryiemsc We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will gladly provide you with a financing offer. We are the official Magni telehandler sales and service partner. We are the official Holp sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Westtech sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Magni range! Subject to errors and prior sale! Internal ID: 160520 = Further information = New: No Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, load capacity: 360 kg, arm reach: 2,830 mm, controller manufacturer: KUKA, controller model: KRC4, The most popular robot series from KUKA, the KR 360 R2830 is sturdy, sleek, versatile, and outfitted with high performance features. The KUKA KR 360 R2830 robot has a repeatability of 0.05 mm. Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KRC4 KR360 R2830 Condition: Used & Tested Year: 2016 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant PLC MERKEZI Refurbishment Services Include with additional cost: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. As PLC Merkezi EOOD, we have more than 400 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. Codpfozl Sgkox Ahmshc

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Codpfszu T Smjx Ahmjhc Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: used, Year of construction: 1997, Automatic in-line filling machine: Model: Bosch FLK 6040 CIP Year : 1997 Power: 5 kW Speed: 30-40 bottles/min Conveyor width: 8 cm Transporting bottles from right to left Linear dosing system with 6 stainless steel pistons Filling point: 6 heads Plunger filling head: yes Volume: from 15 to 500 ml Pistons replaced in 2012. Filling accuracy: +/- 0.5% depending on the product Product: liquid/semi-liquid for bottles, flasks, cans Formats : ⌀ 41 to 115 mm Hauteur max : 320 mm Minimum internal diameter of opening: 5 mm Closed hopper Clean-in-place (CIP) module Maximum temperature: 60°C Dimension : 400 x 150 x 320 cm Weight : 2100 kg Several formats and spare parts available.   Capping/screwing machine: Model : VLM 7010 Year : 1997 Power : 10 kW Transporting bottles by conveyor belt. Direction from right to left. Screw, pressure or push-fit sealing system Capacity : 60 units / min Bottle dimensions: Width: 16 to 90 mm Length: 16 to 135 mm Height: 40 to 280 mm Diameter: 16 to 100 mm Cap dimensions: screw cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length: 16 to 60 mm pressure cap: Csdpfx Ahjyfw H Rsmshc Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length : 16 à 70 mm Machine dimensions: 400 x 130 x 200 cm (+ electrical cabinet 160 x 50 x 170 cm) Weight : 2050 kg  

Condition: used, Year of construction: 2018, Overview Chedpfx Aevpi Abehmoc The ABE GLASSPAK 66 is an isobaric filler that is currently in operation and can be viewed. The machine was manufactured by American Beer Equipment (ABE) in the USA in 2018. It has a maximum output of 4,000 bottles per hour for 0.33-liter bottles. The system is designed for 26 mm crown corks and has 18 filling stations. Technical details  - Output: 4,000 bottles/hour (for 0.33-liter bottles) - Type of closure: 26 mm crown cork - Formats: 0.33L - Filling stations: 18 - Electrical specifications: - Max. Voltage: 208-240 V - Total current draw: 38.5 A - Maximum motor current: 10.6 A - Phase: 3-phase - Frequency: 60 Hz

Condition: good (used), Year of construction: 2007, operating hours: 9,953 h, functionality: fully functional, total width: 2,440 mm, total length: 7,150 mm, total height: 2,590 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 12,500 kg, rotational speed (max.): 1,700 rpm, water tank capacity: 1,600 l, empty load weight: 12,500 kg, power: 480 kW (652.62 HP), water pressure: 1,000 bar, cubic capacity: 15,874 cm³, pump capacity: 193 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 362 in a BDF / WAB container. Similar, but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 362 PRESSURE STAGE 1: Operating pressure: 1000 bar Flow rate: 193 l/min Chedewz Ekqjpfx Ahmjc Switching valve for 4 consumers, each with separately adjustable pressure. Drive speed: 1700 rpm Plunger: d50 mm Drive power: 360 kW With 480 kW Deutz TCD 2015 V08 4V Stage 3 diesel engine With workshop and changing room. Dimensions LxWxH: approx. 7150x2440x2590 mm Weight: approx. 12,000 kg Year of manufacture: 2007 Operating hours: 9953 h (machine hours) Condition: The high-pressure pump is in good used condition.

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Chsdpfx Ajyr Awbshmjc Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, load capacity: 210 kg, arm reach: 2,696 mm, controller manufacturer: KUKA, controller model: KRC4, The KR 210 R2700 Prime is a high-performance 6-axis industrial robot offering a 210 kg payload and 2700 mm reach. Designed for versatility, it delivers exceptional precision and speed in handling, welding, machining, and heavy-duty applications. Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KR210 R2700 prime Condition: Used Year: 2016 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. Chsdpfxsw Nayns Ahmec ( Source: Kuka's Website )

Condition: good (used), Year of construction: 2003, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, Van Hool 20FT Tank Container / Swap Body 31,800L / 1-compartment Bottom Discharge UN Portable, T7 Steam Heating Insulated Payload: 31,860 kg Design Temperature: -40/+130°C 5-Year Valid ADR Inspection: 03/2028 = Further Information = General Information Year of manufacture: Sept. 2003 Model year: 2003 Weights Unladen weight: 4,140 kg Payload: 31,860 kg Gross vehicle weight: 36,000 kg Functional Cargo compartment volume: 30,850 l Body manufacturer: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Cedox U A U Topfx Ahmjhc Condition Technical condition: Good Visual condition: Good Further information Please contact Arne Honingh for more information.

Year of construction: 2022, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Materials and surfaces In contact with product: 316 L stainless steel. (1.4404) Ra ᐸ1.2 μm not in contact with product: stainless steel 304 (1.4301) Ra ᐸ1,2μm Chsdpfxjfhmmxo Ahmjc Drives Three-phase current geared motors Technical data rolls Nominal power (kW): 4,0 Speed (rpm) 3 - 30 voltage: 400 V, 50 Hz Protection class: IP 55 Compacting rollers The rollers for the PHARMAPAKTOR are made of hardened stainless steel. Rollers, roller bearings and bearing seals form a complete unit and are delivered fully assembled. It is therefore not necessary to dismantle the bearings to change the rolls. Roller profile: At your choice roller diameter: 200 mm roller width: 50 mm roller gap: 2.5 mm

Condition: good (used), Year of construction: 2011, pressure: 330 bar, operating pressure: 330 bar, Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but not Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1,500 rpm Drive power: 37 kW Equipped with Siemens 1LA6223-4AA60 electric motor, 45 kW With pressure regulating valve, with safety valve, with oil cooling system. Dimensions (LxWxH): approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of manufacture: 2011 Csdswyn Suspfx Ahmehc Condition: In good used condition. New oil pump.

Condition: ready for operation (used), ALFA LAVAL VELVES COMPLETE PROCESSING SMART UNIT WITH CONTROLL BOX YOM 2015 30 VELVES IN COMPLETE Chodoz Hwhtspfx Ahmec EXCELLENT CONDITION The unit is designed for the automatic safe separation of product flows, the management of different product streams, and the safe cleaning of one line without halting production on the other.

Condition: good (used), mileage: 1,518,718 km, power: 323 kW (439.16 HP), first registration: 12/2012, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, brakes: retarder, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 12, emission class: euro5, suspension: steel-air, total length: 5,950 mm, total width: 2,550 mm, total height: 3,720 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Highline - Hydraulic system - Manual - Auxiliary drive - Pump - Fabric - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8348 kg, Gross vehicle weight: 20500 kg, Total tank capacity: 700 liters, Fifth wheel height: 118 cm, Fifth wheel: Fixed, Number of locks: 1, Winch pulling capacity: 118 tons, Suspension type: Air suspension, Cabin type: Highline, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Color: Gray, Metallic, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Engine power: 323 kW (433 hp), Fuel: Diesel, Euro: 5, Transmission type: Manual, Transmission type: Scania, Gears: 12, Clutch pedal, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, HL, hydraulic unit Chedpfx Aezbxraehmoc = Additional Information = Transmission Transmission: SCA, 12 gears, Manual gearbox Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 12 mm; Tire tread depth right: 11 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 6 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 7 mm; Suspension: Air suspension Weights Unladen weight: 8,348 kg Payload: 12,152 kg GVW: 20,500 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, load capacity: 360 kg, arm reach: 2,826 mm, controller manufacturer: KUKA, controller model: KRC4, The KR 360 series robots make light work of large and heavy components. This enables us to establish a low-space, low-cost solution for handling heavy payloads of up to 360 kilograms in various industries. As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR 360 KRC4 Year: 2011 Control Cabin: KRC4 Rated Payload: 360kg Access Distance: 2826mm Contents: Manipulator + KRC4 Control Cabin + All Wiring Sets + Teach Pendant Shipping: NOT included in the price Payment: 100% payment prior to collection Cjdjw Id Akspfx Ahmohc Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. ( Source : Kuka's Website )

Condition: used, Year of construction: 2017, VWS Nederland – Top/Base Labeling Machine (R → L) Manufacturer: VWS Nederland Type: Top / Base Labeling Machine (Right → Left) Year of manufacture: 2017 Description The VWS Nederland Top/Base Labeling Machine is designed for automatic labeling of products on both the top and bottom sides. The system operates from right to left (R → L) and is suitable for integration into automated packaging and production lines. This labeling system is commonly used in the food, pharmaceutical, and consumer goods industries where accurate and consistent label placement is required. Technical Specifications - Manufacturer: VWS Nederland - Machine type: Top and bottom labeling machine - Labeling direction: Right → Left (R → L) - Label positions: Top and base (bottom) - Year of manufacture: 2017 - Application: Automatic labeling of trays, containers, and packaged products - Integration: Suitable for inline production and packaging lines Key Features - Automatic top and bottom labeling - Right-to-left product flow - Designed for high labeling accuracy - Suitable for various product sizes and packaging formats - Robust industrial construction Applications - Food packaging lines - Pharmaceutical products - Cosmetics and consumer goods - Industrial packaging operations Condition Used More photos and full specifications: / Codjyt Hmvepfx Ahmjhc Manufacturer: VWS Nederland

Condition: excellent (used), Year of construction: 2003, total length: 7,750 mm, total width: 2,550 mm, total height: 2,670 mm, Van Hool 20FT tank container / swap body, 28,095L / single compartment bottom discharge UN PORTABLE, T11 steam heating (10 bar) insulated design temperature: -40° to +220°C, Payload: 31,230 kg ADR and CSC inspection valid until 05-2028 Codpfxjzyrius Ahmjhc = Further Information = General Information Year of manufacture: Jan. 2003 Model year: 2003 Weights Tare weight: 4,770 kg Payload: 31,230 kg Gross vehicle weight: 36,000 kg Functional Loading capacity: 30,850 l Body brand: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Condition Technical condition: very good Visual condition: very good For more information, please contact Arne Honingh.

Condition: used, Year of construction: 2016, operating hours: 3,454 h, Equipment: all wheel drive, * enclosed cab * quick-change coupling Cjdpsz E Uilefx Ahmshc * bucket * forks * rotating beacon ----Vehicle number: 12487----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export handling, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transportation. ?YOUR VTS TEAM

Condition: used, Year of construction: 2016, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Rädlinger swing rotator for CAT M318 / CW 40 mount / Year of manufacture: 2016 Price: €12,890.00 net / €15,339.10 gross - Equipment class: 23 t - Weight: 840 kg Matching rigid ditch cleaning bucket available for €1,490.00 net. Price only applicable when purchased together with the swing rotator. We have many more attachments in stock, available immediately! Cjdsymi I Aepfx Ahmjhc Financing offers available on request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telescopic handlers, JCB construction equipment, Mercedes-Benz, and Iveco. Additionally, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No: 562046 = More information = Intended use: Construction Please contact Marius Herden for further information.

Year of construction: 2003, condition: excellent (used), Ilpra fillseal 4000CIP rotating cup-filling machine Rotating cup-filling machine - Up to 4,000 cups per hour - Two heads - 75 mm - Two types of filling heads - CIP cleanable - Complete manual and drawing documentation available Chsdpfjy I A Hpex Ahmoc - Some spare parts included - Year of manufacture: 2003 - Service and spare parts available from Ilpra Process steps: 1. Cup picking 2. Filling 3. Sealing 4. Seal stamping/heating 5. Date stamping 6. Cup discharge to conveyor belt Excellent working condition. Videos with operating cups available.

Condition: used, Year of construction: 2020, Hotmelt spine glue unit Muller Martini Csdjuliq Tepfx Ahmjhc Year: Suitable for connection with a Muller Martini Vareo .

Condition: excellent (used), Year of construction: 2005, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2005 CIMC tank container, 20FT ISO tank container, 25,000L / 1 compartment UN PORTABLE T11 22K2 steam heating bottom discharge design temperature: -40/+130 °C 2.5Y+CSC test valid until 01/2029 = Further information = General information Year of manufacture: Apr. 2005 Model year: 2005 Weights Empty weight: 3,800 kg Payload: 32,200 kg GVW: 36,000 kg Functional Load compartment volume: 25,000 l Body brand: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Chodpfx Ajz Icg Dohmjc Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for more information.

Condition: used, Year of construction: 2016, operating hours: 3,318 h, Equipment: all wheel drive, * Enclosed cabin * Quick-change system Chedpfxsz E Uhuj Ahmec * Bucket * Fork * Rotating beacon ----Vehicle number: 12486----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transportation, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM