Used Abm Efb2H/3G180F/100/30D3/4 for sale (72,522)

Condition: used, Year of construction: 2015, HORIZON VAC-100 Booklet Making System – 5 Towers / 50 Stations Manufacturer: Horizon Model: VAC-100a + VAC-100m × 4 Towers Kodpfx Aezyfvuskwodt Year of Manufacture: 2010 Number of Towers: 5 Towers Number of Stations: 50 Bins * Finishing System: ST-CV Conveyor ST-40 Stacker SPF-200A Stitcher & Folder HP-200A Punch Unit FC-200A Trimmer LC-200 Long Conveyor PK-30 Preset Kicker Year of Finishing Units: 2015 * Machine Configuration: VAC-100a + VAC-100m × 4 + ST-CV + ST-40 + SPF-200A + HP-200A + FC-200A + LC-200 + PK-30 * Main Functions: Suction-feed collation Automatic booklet making Stitching and folding Hole punching Trimming Condition: Used, inspected, and serviced Availability: Available immediately Location: JCM Corporation showroom, South Korea Packing: Vacuum-packed and export-standard wooden cases

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,358 h, machine/vehicle number: K22268, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: JORNS, working width: 6,410 mm, folding beam adjustment: 200 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, back gauge speed R-axis: 283 mm/s, back gauge travel distance R-axis: 1,250 mm, back gauge travel distance Z-axis: 1,250 mm, overall weight: 13,000 kg, total length: 8,500 mm, total width: 3,354 mm, total height: 1,938 mm, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, We offer this used Jorns JDB-150G-DP-1250-JC100-6.4-dsp panel bending machine for sheet metal, manufactured in 2023. Year of manufacture: 2023 Model: JDB-150G-DP-1250-JC100-6.4-dsp Rated current: 80 A Operating voltage: 3 × 400 V Kdodpfxsz Dille Akwst Frequency: 50 Hz Control voltage: 24 VDC Maximum hydraulic pressure: 210 bar Maximum pneumatic pressure: bar If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2020, 1. WEISHAUPT WM-G10/4-A, (with gas duct) - Output: 100-1100 kW - Design: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2015 (1 unit), 2013 (2 units available) 3. WEISHAUPT WM-G10/2-A Design: ZM-LN Output: 75-630 kW Year of manufacture: 2021 4. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 125-900 kW - Design: ZM-LN - Year of manufacture: 2011 5. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2011 6. WEISHAUPT WM-G10/3-A, (with gas duct) Kodpfx Aewgyrtjkwjdt - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2009

Year of construction: 1998, condition: ready for operation (used), pressing force: 102 t, number of axes: 4, This 4-axis Warcom UNICA 100-40 hydraulic press was manufactured in 1998. It features a press force of 100 t and a bending length of 4,000 mm, making it suitable for various bending applications. The machine is equipped with a Promecam tooling system and ESA S530 CNC control. If you are looking to get high-quality bending capabilities, consider the Warcom UNICA 100-40 machine we have for sale. Contact us for further details. • Tool clamping/tooling system: Promecam • CNC control: ESA S530 • Condition: Overhauled/revised, ready for operation Kdedpfxszypube Akwst Additional equipment • Laser Safe safety system Technical Specification Bending Length 4000 mm

Condition: used, This listing is for a Tecan Genesis 150 2002 Liquid Handling Station - SPARES ONLY Ksdpfxexzg I Us Akwjdt

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer Ksdpfezr H Aaex Akwsdt - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) Kdedpfx Akox Ry Hrswet 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Condition: used, functionality: fully functional, Year of construction: 2020, The temperature control units from Regloplas are for sale: Medium: Water Heating capacity: 9 kW Kedeziwmkjpfx Akwodt Cooling capacity: 40 kW Operating temperature: max. 140 degrees Year of manufacture: 2020

Condition: good (used), Year of construction: 2023, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Kdjdpsz A T Hksfx Akwjt

Condition: excellent (used), Year of construction: 2010, Arburg 470H 1000-400 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 09.2010 Kdedpfezy Iz Tox Akwet Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 1 Hot runner control x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor with inverter drive - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/bottle with compressed nitrogen (additional load for fast operation) Central lubrication Integrated sorting flap Arburg Multilift Select robot 6kg transverse Year of manufacture: 09.2010 4-axis robot: 3 axes driven by servo motors (electric); C-axis - pneumatic Travel paths in axes: X-400, Y-600, Z-1800 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 5180 kg Length/Width/Height: 4.40x1.56x2.02 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), OMSG LAUCO 100 N-SP4 Type: Roller conveyor Max. width of workpiece: 1.000 mm Max. height of workpiece: 400 mm MAx. loading/roller: 800 kg Nr. Of turbines: 4 Turbine wheel diameter: 350 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min x 4 Transport speed: 0,5 - 3 m/min Kdodpjzh H Ibofx Akwst Cleaner type: Airwash Filtering unit: Included FX20/1 Foundation: no Total width of machine: app. 5.500 mm Total height of machine: app. 4.500 mm Total length of machine: app. 12.000 mm Max installed power: app. 50 kW

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Polar LW 1000-4 stacking lift, year of manufacture 2003 Platform: 80 x 126 mm Kedpfx Akozwg A Rowsdt The automatic lifting of the cutting material allows the operator to load the material into the shaking device or directly into the cutting machine at an ergonomically favorable working height. The stacking lift can also be used to unload cutting material. Stacking lifts do not need to be anchored to the floor and can therefore be easily relocated. They are equipped with continuously adjustable photoelectric barriers for automatic lifting or lowering. The control panel can be easily mounted on the right or left side.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) Ksdpfx Akjw H Dgnewsdt - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Year of construction: 2003, condition: ready for operation (used), Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Ksdpfxetyyn Ho Akwsdt

Condition: ready for operation (used), Year of construction: 2001, operating hours: 9,584 h, pressing force: 153 t, total width: 1,700 mm, total height: 2,820 mm, overall weight: 11,000 kg, controller manufacturer: DELEM, controller model: DA-69T, product length (max.): 3,400 mm, number of axes: 4, This 4-axis PLACKE QPB-4 150/3100 was manufactured in 2001. It features a press force of 1500 kN and a bending length of 3100 mm, making it suitable for various bending applications. The machine includes a mechanical crowning system and comes with a comprehensive set of tooling and accessories. If you are looking to get high-quality bending capabilities, consider the PLACKE QPB-4 150/3100 press brake we have for sale. Contact us for further details. Kdodpfx Ajzm Unyskwjt - Control System / Software: Delem DA-69T CNC Control (4 axes)- Operating Hours: 9,584.1 hours- Maximum Operating Pressure: 300 bar- Distance Between Uprights: 2600 mm- Ram Stroke: 215 mm- Installation Height: 525 mm- Throat Depth: 300 mm- Working Height (without table/tools): 900 mm- Rapid Advance Speed: 150 mm/s- Working Speed: 0 - 9.8 mm/s- Return Speed: 100 mm/s- Safety Speed: < 10 mm/s- Stopping Time: 0.15 s- Safety Distance: 270 mm- Ram Dwell Time: 0 - 9.9 s- Drive Power: 11 kW- Total Connected Load: 15 kW- Voltage / Frequency: 400 V / 50 Hz (3 PEN)- Control Voltage: 24 V DC- Current Rating: 30 A- Fuse Protection: 35 A- Hydraulic Tank Capacity: 270 L- Max. Oil Operating Temperature: 80 °C- Oil Filtration on Filling: < 25 µm- Sound Level: < 70 dB(A)- X-Axis Travel Range: 600 mm (Max speed: 400 mm/s, Accuracy: +/- 0.02 mm, Motor torque: 1.9 Nm)- R-Axis Travel Range: 200 mm (Max speed: 200 mm/s, Accuracy: +/- 0.05 mm, Motor torque: 1.9 Nm)- Z1-Z2-Z3-Z4 Axis Adjustment Range: 2400 mm (Manual adjustment)- Crowning System: Mechanical crowning system by Wila (0.6 kW, controlled via CNC)- Tool Clamping / System: Wila Modufix- Operating Ambient Temperature: +5 °C to +40 °C- Operating Humidity: 30% to 95% (non-condensing)- Included Accessories & Tooling:* Foot control panel* Technical documentation (1 set)* Sheet support arms: 2x 1m, 2x 0.5m* Punches (Upper Tools): 5x 515mm (28°, H200); 2x 100mm (28°, H200); 1x 200mm (28°, H200); 1x each 20mm, 30mm, 35mm, 40mm (28°, H200); 2x 100mm (28°, H200 with corner notch); 2x 255mm* Dies (Lower Tools): 5x 515mm (12x30°, R=1, H55); 6x segmented (12x30°, R=1, H55) [Total width 3m]; 4x 515mm; 1x 475mm; 8x segmented [Total width 3m]; 1x 515mm (50x80°, R=5, H55); 1x unspecified; 1x 200mm (V=8, 30°, R=1, H55)* Tool extensions: 1x 1240mm (H140, L410), 2x 50mm (H100), 4x custom-made (H100) Technical Specification Bending Length 3100 mm

Condition: new, Year of construction: 2020, A new high-pressure pump from Andritz Ritz GmbH is offered. Year of manufacture 2020. Technical details: see nameplate. Kdjdpfx Akjvu T A Newet

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Brush sanding and finishing machine / Universal brushing machine Manufacturer: Leif Lorentz / Universal Finishing Systems Model: B 4 1000 Universally applicable as a finishing unit, for dust removal and workpiece cleaning, or for sanding Year of manufacture: 2005 Working width: 800 mm Ksdsxrlgqspfx Akwedt Belt width: approx. 850 mm Pass-through height: approx. 60 mm 2 brush units from above, each 1.1 kW, infinitely variable speed, 350–900 rpm Brush configuration as currently installed. Machine dimensions approx. 2400 x 1300 x 1700 mm

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Kjdpfx Ajzucxcekwjdt Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: good (used), Year of construction: 1980, machine/vehicle number: 20007, Offer 23326 Technical specifications: - Broaching tool width up to 10 mm - Broaching tool length up to 1000 mm Kedpfx Asyfgc Ijkwodt - Pulling force: 1.5 t - Working speed: 4 m/min - Working / operating height: 1000 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 1500 x H 1000 x D 400 mm - Weight: approx. 200 kg

Condition: used, machine/vehicle number: 5240, Housing for 101 plates. Kdodpfx Akez A Dfkowjt Delivery supply: with 2 end plates of stainless steel. Intermediate plates are not included Plates maximum: 100 Plate formats: 400x400 Platefilter features: Manual spindl Dimension  ca. 300x60x100 cm dimensio between the first plate to the spindle ca. 170cm

Condition: excellent (used), Year of construction: 2008, Arburg 470S 1100-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Clamping Unit: Clamping force: 110 t Tie bar distance: 470x470 mm Platen size: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control System: SELOGICA – Touchscreen Additional Equipment: Euromap 67 Robot interface 2 x air valve 1 x hydraulic core pull Control system with 8 hot runner zones Hardened injection unit – Bimetallic Proportional valve on injection unit – precise injection Conveyor belt integrated with machine control Built-in sorting flap Screw diameter can be changed Wittmann W711 robot Year of manufacture: 2008 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; C axis – pneumatic Travel paths in axes: X-420, Y-1200, Z-2000 Touch control panel Robot with adapter Kdedpfxezy I D Uj Akwet Robot purchase available at extra cost Dimensions: Weight: 5200 kg Length/Width/Height: 4.56x1.52x2.13 m All machines offered will be started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2015, Clamping force: 100 t Screw diameter: 40 mm Shot weight: 150 g Kedszypwpspfx Akwodt Shot volume: 165 cm3 \+ robot Sepro success 11 Type: Horizontal Drive: Electric

Condition: ready for operation (used), Year of construction: 2001, pressure 100 t chamfer lenght 4100 mm distance between columns 3700 mm column arm 415 mm stroke max. 215 mm dayligth 410 mm ajustment speed 200 mm/sec working feed 10.0 mm/sec return speed 150 mm/sec work height max. 1080 mm table width 100 mm Control CYBELEC oil volume 160 ltr. voltage 400 V power capacity 8.5 kW weight 10200 kg range L-W-H 4800 x 1800 x 2600 mm - in checked conditions - machinevideo - ?v=Phcik_oo4CE Equipment: - BEYELER electro-hydraulic CNC press brake - CNC CYBELEC control unit “DNC 1200 PS/B” * High-resolution screen * Clear, concise menus in the operator's language * Tool and product library Kdodpfxoxzuwkj Akwet * Swiveling control panel, front right - CNC-controlled axes (Y1+Y2-X) - CNC-controlled backgauge adjustment (X-axis) * 2x manually adjustable stop fingers - Manual upper tool clamping - Manual lower tool clamping - Rear safety device (safety door) - Side safety device (safety doors) - Bending tools * 1x set of split upper tools (ROLLERI TOP 175.26.R08) * 1x set of split 1V dies (V 12 mm) - 2x freely movable 2-hand controls - 2x freely movable foot switches - Operating instructions for control system

Condition: excellent (used), Electrically controlled infeed magazine for planing machines Kjdpfx Akjz Dpvdewodt For sale is an electrically controlled infeed magazine for continuous and uninterrupted feeding of planing machines. Technical features: * Automatic adjustment of the feed rate to the planing machine * Feed rate of up to 60 m/min * Adjustable feed force, adapted to the respective workpiece size * Continuous and uniform feeding * Front section can be folded down for better accessibility and convenient operation * Robust design for professional use The infeed magazine is ideal for continuous operation and efficient material feeding to planing machines.

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm maximum plate size 1000x700 maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection. Kdjdpfotv Ivzox Akwjt