Used Airtech Absaugung Sct8-A75-L6 for sale (648)

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Iodpfxsl Dw U Ds Anwoic Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. Iodpfx Aneib Dadjwsic The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade faire machine *available upon request New: With the frequency converter option, up to a maximum of 45% eligible for state funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *both individual machines manufactured and in stock, only need to be connected to each other 1. Technical Data Briquetting Press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Iiedpod Su Hxjfx Anwoc Customs tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput rate (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Footprint total system: 2.2x1.1x2.8 m LxWxH Height - 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Press tongs cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant 2. Technical Data Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle left (when standing in front of the dust bin) Residual dust:

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,200 kg, permissible axle load (axle 2): 11,200 kg, permissible axle load (axle 3): 11,200 kg, loading space length: 14,600 mm, loading space width: 2,550 mm, loading space height: 880 mm, total length: 14,600 mm, total width: 2,550 mm, total height: 880 mm, suspension: air, tire size: 245 / 70 R17.5, color: blue, Year of construction: 2008, Equipment: tail-lift, Color: Blue Load capacity: 72,600 kg Loading platform height: 885 cm Extendable Braked Main Features Manufacturer: Goldhofer Type: STZ L6 65/80A Semi Low Loader with Ramps Chassis number: WG0STZL6A80030419 Year of manufacture: 2008 Weights/Loading Capacity King-Pin load: 26,000 kg Iisdpfsx R Undjx Anwjc Axle load: 11,200 kg Total axle load: 6x 11,200 kg = 67,200 kg GVW: 93,200 kg Empty weight: 20,600 kg Loading capacity: 72,600 kg Axles Axle brand: BPW Air suspension 1st Axle rigid Axles 2 - 6 hydraulic steering Axles 1 & 2 liftable High-low valve WABCO braking system Tyres: 245 / 70 R17.5 Dimensions Length: 14,600 mm Extensions: +7,200 mm Max extended length: 21,800 mm Loading floor width: 2,550 mm Height: approx. 885 mm - 925 mm King-Pin height: +/- 1,350 mm Additional Information • Operated on Truck PTO • Lashing rings • Stake pockets • Partly wooden loading floor • Mechanical landing gear • Hydraulic loading ramps • Extendable loading floor • Rear bumper with lights • King-pin 3.5" • Central lubrication • Marker boards oversize load • Radio remote control • Outriggers • Toolbox on gooseneck = Further Information = General Information Year of manufacture: 2008 Axle Configuration Tire size: 245 / 70 R17.5 Axle brand: BPW Eco Suspension: Air suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 11,200 kg Rear axle 2: Twin tires; Lift axle; Max. axle load: 11,200 kg; Steerable Rear axle 3: Twin tires; Max. axle load: 11,200 kg; Steerable Rear axle 4: Twin tires; Max. axle load: 11,200 kg; Steerable Rear axle 5: Twin tires; Max. axle load: 11,200 kg; Steerable Rear axle 6: Twin tires; Max. axle load: 11,200 kg; Steerable Weights Empty weight: 20,600 kg Payload: 72,600 kg GVW: 93,200 kg Functional Body brand: WABCO Loading platform height: 88 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: refurbished (used), machine/vehicle number: SC03, PJ.105.100F/0x Schneider Servo Controller Iodpfxsy En Uts Anwsic for M10 Drive Motor of Suprasetter A52/A75 >2009 (GEN III) second-hand (refurbished) All offers are subject to prior sale

Condition: used, Absaugarm aus Metallrohr und wird für das Punktschweißen, Laboranwendungen und die Nebelabsaugung Ventilatoren der FUA Serie können als Direktmontagelüfter für Absaugarme Suction Arm is ideal for grinding, polishing and other types of high-dusting Operations Absaugung - Ventilator / Suction - Fan Plymovent MMH-100-15 - FUA-1300 Baujahr / Year 2007 - Serial-No. 7402 Iodoyt Iadopfx Anweic Einsatzmöglichkeiten: Punktschweißen / Spot welding Schleifen und Polieren / Grinding and polishing Laboranwendungen / Laboratory Applikation Nebelabsaugung / Mist collection Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup work, but also protects the operator and those around them from the harmful effects of airborne particles. With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. Thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. ✅ DINO II & DINO MASTER Available in 60 and 100 liter versions The SAPI pressure-return sandblaster "DINO" is a compact and universally applicable device. It is characterized by its robust construction and mobility. The blasting performance depends on various factors such as surface condition, compressor capacity, type of blasting media, etc. The cleaning performance is 3 - 10 m² / hour. Overall, this device provides the worker with a clean working environment, low abrasive consumption (thanks to the suction unit), and lower waste disposal costs. Isdpfx Ajwc Rg Hsnwjic The device is used in the steel, shipbuilding, and petroleum industries, as well as for maintenance work in the construction sector, by stonemasons, and others.

Condition: new, Year of construction: 2025, pressure: 12 bar, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup but also protects the operator and those around them from the harmful effects of airborne particles. With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. And thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. ✅ PR 50 Dust-free Sandblaster With its versatile application capabilities, the PR 50 can handle a wide variety of surfaces, from hard metal to delicate glass. Iijdpeupzn Eefx Anwjc Our PR 50 is an excellent choice for those working in the automotive, construction, or cleaning industries, to name a few. Its compact size and handy design make it easy to operate and transport, even for those new to sandblasting.

Year of construction: 2007, condition: used, Digestorium exhaust system for pharmacies, chemistry and medicine -Interior dimensions: 540/850 / H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge Isdpfx Asb Uhnqonwsic -Connection: 0.085 kW -Type suction: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace Iodpfjxrgl Ijx Anwjic - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, noise level: 59 dB, warranty duration: 12 months, volume flow: 420 m³/h, Equipment: chassis, type plate available, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M Iiedpfx Anext Dq Rowec System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: excellent (used), Manufacture: Aerofoil Isdpfx Aek Nli Hjnwsic Type: 30J 26° JAR Blade diameter: 750mm 2 stage Air transport: approx. 5000 m3/h++ 110V 5.5A, 0.48hp, direct current (DC)

Condition: used, functionality: fully functional, Orion KHA750A dry-run, oil-free vacuum pump Oil-free (dry scroll, i.e. dry scroll) pumps have a low final vacuum and enable high pumping speeds. Iiedpjufh Upjfx Anwec Pumping capacity 145 l/min Pipe connection: RC 1/4 -- diam. 70mm Operating pressure: 8 - 48 kPa Air temperature: 0-40 °C, humidity: normal level (65 ± 20%). Several pieces in stock

Condition: like new (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, overall weight: 1,890 kg, motor manufacturer: garden denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, noise level: 75 dB, type of cooling: water, color: blue, Equipment: type plate available, Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. Iisdow Nzrfjpfx Anwoc

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Mobile Stand The unit is in full working condition and is ready for immediate use Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Iijdpfexhfpkjx Anwoc Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 95 kg, Equipment: documentation/manual, type plate available, Extraction capacity of filter unit at spigot*: 2200 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Ijdpfoum Uzasx Anwsic Dimensions L/W/H in mm: L 1623 / W 508 /H 545 Colour: RAL 7035 Weight: 95 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Filter equipment*: - 40 mm aluminium mesh pre-filter (optional/retrofittable: PrePac pre-filter package) - 1 piece electrostatic filter cell - 20 mm knitted aluminium post-filter (optional: 40 mm post-filter range) OPTIONAL: Several pre-filter packages possible The application: Horizontal, electrostatic air cleaner with EC centrifugal fan for separating oil mist, emulsion mist and smoke from the hall air in recirculation mode. Vertical raw air capture via intake manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your advantages of the ELBARON series: - 6 appliance variants available - Directly from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large programme of mounting and connection accessories - Quality made in Germany We have developed the hall extraction system as a cost-effective alternative to expensive centralised extraction systems or complex individual machine extraction systems. This allows you to protect the health of your employees and maintain your factory building without major investment. We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter devices on the market and are in use worldwide.

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Iedpop S Tlhefx Anweic Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2003, cutting height (max.): 320 mm, saw blade diameter: 750 mm, rotational speed (max.): 800 rpm, Equipment: CE marking, saw blade guard, TECHNICAL DETAILS Cutting height (max.): 320 mm Cutting height at 90°: 320 mm Saw blade diameter: 750 mm Saw blade tilt adjustment: 45° Rotational speed (max.): 800 rpm Rotational speed (min.): 650 rpm MACHINE DETAILS Input voltage: 400 V Input current: 29 A Input frequency: 50 Hz Height adjustment type: electric Table adjustment type: electric EQUIPMENT CE marking Variable speed control Iedpfx Anszc Hg Ujwsic Saw blade guard

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle Iodertrzdopfx Anwsic (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Iiodpfx Ajrtryksnwoc Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Year of construction: 2000, 2000 Danobat Danumeric NA - 750 CNC Lathe Ijdpfx Anszfqb Hewoic Danobat Danumeric NA - 750 CNC Lathe max swing 700mm, X/Y 255/520mm, tailstock, 12-Pos-Tool-Turret, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 12to, Origin France, Location : 900 avenue de Paris, Billy Berclau, FRA-NA 62138

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 135 kVA, controller manufacturer: Heidenhain, controller model: TNC640i HSCI, workpiece diameter (max.): 1,500 mm, workpiece weight (max.): 3,000 kg, rotary table diameter: 1,200 mm, overall weight: 37,000 kg, spindle speed (min.): 1,200 rpm, coolant supply: 70 bar, spindle motor power: 7,800 W, spindle nose: BT50/Capto CS, number of spindles: 2, number of slots in tool magazine: 80, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Ibarmia ZVH60/L6000 is a versatile multi-process machining centre designed for precision milling and turning operations. Equipped with a Heidenhain TNC640i HSCI control system and HR-520 portable hand-wheel, it offers exceptional control and accuracy, further enhanced by Heidenhain Kinematics Opt calibration of rotating axes. This machine features a powerful CAPTO CS main spindle with through-spindle coolant at 70 bar, a generous 80-position tool magazine, and support for BT50/CAPTO tooling. Its horizontal rotary table and turning spindle head deliver up to 78 kW and 1400 Nm, with a 500 mm centre height, while the off-centred Y-axis rotary table allows increased swing for 5-axis operations up to Ø1200 mm. Additional highlights include an automatic self-centring 3-jaw chuck (Ø630 mm), 110 mm bar capacity, hydraulic extension for automated operation, manual tailstock, and sub-plate for tailstock. Precision is assured with RENISHAW RMP600 and TS27R touch probes, while gear hobbing, gear skiving, and grinding with HSKA100 are also supported.For ease of use and maintenance, the machine comes with air and spray guns, mist filtration, a tipping swarf bin, steady rest support, dressing unit, operator platform, and safety door modifications—making it a complete solution for demanding machining tasks. Full Tec spec available upon request Iijdpfx Anezdix Uewec

Condition: used, This listing is for the Elga Veolia Purelab Water Purification System with LA757 The unit is in full working condition and ready for immediate use Designed to deliver high-quality purified water for laboratory applications, this system is compact, efficient, and suitable for analytical and research environments requiring consistent water purity. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Isdpfxsyyn D Do Anwjic • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Colour: Grey Weight: 1.600 kg - Year: 2002 Iijdpoyf H H Hsfx Anwoc - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 595001 3 16 - Main motor power [kW]: 6.5 - Voltage [V]: 400 - Current consumption [A]: 15 - Fuse [A]: 20 - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), mileage: 232,469 km, power: 162 kW (220.26 HP), first registration: 04/2026, fuel type: diesel, wheelbase: 4,990 mm, fuel: diesel, fuel tank capacity: 150 l, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro3, total length: 9,990 mm, total width: 2,550 mm, total height: 3,410 mm, loading space length: 7,320 mm, loading space width: 2,490 mm, loading space height: 2,260 mm, Year of construction: 2026, Equipment: ABS, differential lock, electric window regulation, onboard computer, power assisted steering, tail-lift, = Additional Options and Accessories = - Differential lock - Sliding roof - Central lubrication system = Further Information = Number of cylinders: 6 Iiodpfxezd Emne Anwoc Engine displacement: 5,480 cc Unladen weight: 9,340 kg Payload: 12,160 kg GVWR: 21,500 kg Tail lift: Zepro, 2,000 kg Sliding roof: Yes Please contact Vitali Lenda for further information.